bearing shaft for sale, brand-new and used.

Sta-Rite Step10-01 4" Submersible well Pump 380 Total Head Feet 10GPM 1/2 HP 7 Stage 2 Wire 115 volt 1 ph 60hz Precision-engineered, corrosion-resistant composite pumps deliver efficient, dependable performance even in rough, aggressive water KEY FEATURES

Triplex Plunger Pump FEATURES: Manifold: High strength forged brass for long term use Bolts: Eight 8mm grade 8.8 Plungers: A special thick ceramic for long life, strong durability, and more resilience Crankcase: Precision die cast, large cooling fins, and anodized for maximum heat dissipation. Sight glass, fill and side and bottom drain plugs Bearings: Oversized tapered roller bearing for maximum life and load disbursement Bearing Support: Precision die cast and machined to assure c

Triplex Plunger Pump FEATURES: Manifold: High strength forged brass for long term use Bolts: Eight 8mm grade 8.8 Plungers: A special thick ceramic for long life, strong durability, and more resilience Crankcase: Precision die cast, large cooling fins, and anodized for maximum heat dissipation. Sight glass, fill and side and bottom drain plugs Bearings: Oversized tapered roller bearing for maximum life and load disbursement Bearing Support:

THOMSON LINEAR BEARING AND BALL SCREW SET W/ CASE This is a like new Thomson Linear Bearing set with Case. Includes 1/2" Rod side mount 8" long with two 1/2" open bearings Double 1/4" 7" Thomson rail on mounts 5/8" diameter 6" long ball screw 8" long Thomson 1/2" Double Rod slide - 4 1/2" wide Includes nice carrying case 60 Case LinearRace shaft surface hardness provides resistance to deformation, whether it be from extreme point contact loading from bearing balls, line contact from

Bearing assembly on Bell & Gossett Series PD iron body pumps, including models: PD38S, PD38S BI, PD38T, PD38T BI, PD39S, PD39S BI, PD39T, PD39T BI, PD40S, PD40S BI, PD40T and PD40T BI, as well as Series 60 bronze fitted, large bearing frame pumps, including models: 1-1/2A and 2A. The 185260 bearing assembly includes all the pumping parts (bearings, shaft, shaft sleeve, seal kit, etc.) pre-assembled into a new pump housing.

Makeblock Educational Ultimate Robot Kit - Blue Radio Shack Description:This is a comprehensive robot kit for beginners to explore the robotic world or experts to build complex robots. It contains everything you need to construct your robot dreams: metal geared motors, Arduino-compatible controller, programmable RGB LED strip, different kinds of sensors, robotic gripper and other mechanical parts.It is also great for learning Arduino and Scratch programming.

New Thomson TWN-20 Linear Pillow Block Bearings 1.25" Inside Diameter, Heavy-Duty 3,000lb Load Capacity

This is for a new linear bearing shaft set (1ft x 3ft x 4ft). You get three axis pairs. Perfect for making your own CNC router or xyz system.

This auction is for (1) Used 9' Ball Screw, All Thread, Acme Threaded Rod, Linear Actuator with Keyed Shaft. Dimensions: 9' x 2" Shaft overall, 8' of threads, 1" keyed shaft, 7" x 4" slide bearing, 8" x 8" x 5" rotor bearing base, and approximately 3 3/8" shaft height on center. I have three of these 9' threaded shafts with actuators and I have three extra threaded shafts without actuators.

New Thomson TWN-16-OPN Linear Pillow Block Bearings 1" Inside Diameter, Heavy-Duty 1,560lb Load Capacity

Triplex Plunger Pump FEATURES: Manifold: High strength forged brass for long term use Bolts: Eight 8mm grade 8.8 Plungers: A special thick ceramic for long life, strong durability, and more resilience Crankcase: Precision die cast, large cooling fins, and anodized for maximum heat dissipation. Sight glass, fill and side and bottom drain plugs Bearings: Oversized tapered roller bearing for maximum life and load disbursement Bearing Support: Precision die cast and machined to assure c

Triplex Plunger Pump FEATURES: Manifold: High strength forged brass for long term use Bolts: Eight 8mm grade 8.8 Plungers: A special thick ceramic for long life, strong durability, and more resilience Crankcase: Precision die cast, large cooling fins, and anodized for maximum heat dissipation. Sight glass, fill and side and bottom drain plugs Bearings: Oversized tapered roller bearing for maximum life and load disbursement Bearing Support: Precision die cast and machined to assure c

Triplex Plunger Pump FEATURES: Manifold: High strength forged brass for long term use Bolts: Eight 8mm grade 8.8 Plungers: A special thick ceramic for long life, strong durability, and more resilience Crankcase: Precision die cast, large cooling fins, and anodized for maximum heat dissipation.

1/2 HP - 15 GPM - 115 Volts - 1 Phase - 5 Stage - 2 Wire Precision-engineered, high-quality, rugged Signature 2000 Stainless Steel Series Pumps deliver efficient, depend- able performance even in rough, aggressive water. Heads to 1,950 feet and capacities to 65 GPM. Built to deliver long-term, trouble-free service.

SOLID Aluminum with 1/2" thick steel plate base and steel bearing housing. Four inch spiral mandrel tapers from 3/4" to 3/16" pointed tip. Industrial quality machinery.

This listing is for a RELIANCE brand 12 Liter BOILING or REACTOR FLASK with 2 side necks of 24/40 and a center 55/50 neck joint, and is COMPLETE with an adapter from 55/50 to ACE #15 THREAD joint, plus an ACE #15 STIRRING BEARING (Ace #8044-24 @ $233), plus a 5" wide TEFLON BLADE 5" and also a 26.5" long 10 mm diameter STIRRING SHAFT. It was used for preparing small batches of silver nitrate, and has been thoroughly cleaned. You can see it here in our lab at 1020 N.

RACE CAR TUBING NOTCHER Made By Affordable Bender 100% Made in USA Simple to Use - The Affordable Bender Tube Notcher may be mounted in a drill press or simply clamped in a vise and used with a 1/2" hand drill. It can be mounted vertically to mount in your drill press or mill or horizontally to mount to your welding table. The 1/2" hand drill setup is by far the best in our opinion.