best place to sell a generator for sale, brand-new and used.

This is a Tektronix AWG5014 Arbitrary Waveform Generator. This unit is in great shape, works, BUT has an occasional data timing error on power up. The error typically only occurs when the unit has been unplugged and is powered on.

This is an Agilent 70300A RF Tracking Generator for the 70K/MMS Series Spectrum Analyzers. An Agilent 70300A RF tracking generator adds stimulus-response measurements to an Agilent 70000 series spectrum analyzer, enabling accurate characterization of gain, frequency response, isolation, and return loss. The wide dynamic range makes accurate measurements of filter rejection and switch isolation without the need for time-consuming

This is an Agilent 81104A Pulse/Pattern Generator with two 81105A Output cards installed. The Agilent 81104A 80 MHz Pulse Pattern Generator with one or two Agilent 81105A output modules (single-/dual-channel) builds on the performance of the 81101A and is backward-compatible. The 81104A extends the frequency range and adds RZ/NRZ pattern capability up to 16 kbit per channel.

Hp 8013B Pulse generator Dual Output 50Mhz RE0000000332 Description: Brand: HP Model: 8013B Dual Output 50Mhz Pulse Generator Powers on tested ok for both positive & Negative outputs Power on Display ok complementary outputs over control range Tested for key functi

Electronic Component

Electronic Component

Electronic Component

Electronic Component

Electronic Component

SyntheSys Research Bit Alyzer ® 14400B-PG 14.4 Gbit/sec Parallel Digital Channel Pattern Generator Proudly offered by

Agilent 8116A 1mHz - 50MHz, 32 Vp-p, Pulse/Function Generator

Agilent E4438C w/ Options: 506 / 601 / UNB / UNJ

Agilent E8257D w/ Options: 1EA / 520 PSG Analog Signal Generator, 250 kHz - 20 GHz Proudly offered by

function getPAShowcaseParas(){return '&ebayuserid=alice1101983&ebayuserkey=da059d1c-df5f-4862-9981-4e8e38af88c3&ebaysite=0&qty=18&toptext=More than $50=Free Track No&toplink=http://www.pushauction.com&bottomtext=Click here to browse all my eBay&bottomlink=http://www.pushauction.com&windowwidth=900&windowheight=355&windowb

function getPAShowcaseParas(){return '&ebayuserid=alice1101983&ebayuserkey=da059d1c-df5f-4862-9981-4e8e38af88c3&ebaysite=0&qty=18&toptext=More than $50=Free Track No&toplink=http://www.pushauction.com&bottomtext=Click here to browse all my eBay&bottomlink=http://www.pushauction.com&windowwidth=900&windowheight=355&windowb

function getPAShowcaseParas(){return '&ebayuserid=alice1101983&ebayuserkey=da059d1c-df5f-4862-9981-4e8e38af88c3&ebaysite=0&qty=18&toptext=More than $50=Free Track No&toplink=http://www.pushauction.com&bottomtext=Click here to browse all my eBay&bottomlink=http://www.pushauction.com&windowwidth=900&windowheight=355&windowb

Aluminum Angle 3/4 x 3/4 x 24 in, 1/16 in thick Description – I originally fabricated these angles for the building of solar panels and eventually realized other people had lots of other uses for them. I been selling these since Feb of 2013 and will keep making them as needed. They are slightly less than a 1/16 of an inch thick.