body shaft for sale, brand-new and used.

SimpleBlue 5pcs 16800RPM DC 6V N20 Micro Motor for RC Model Airplane Helicopter

SimpleBlue 5pcs 6x12mm Coreless DC Motor 3V-4.5V high speed for helicopter model aircraft

STEPPER MOTOR Lin Engineering 5709M-01 Nema size 23, body length 2", 175 on/oz holding torque 0.9 deg/step, bipolar (4wire), 6.5 Ohms, 1.1Amps, single shaft 0.252" dia x 3/4"long as shown. (CRF1)

SimpleBlue 3Pcs Mabuchi DC6V 15000RPM N20 Bare Magnetic Carbon Brush Micro Motor for Toys

[ Dayton 3/4 HP, 1725 RPM, Belt-Drive Fan and Blower Motor

Lin Engineering size NEMA 17 200 s.rev. stepper bipolar (4 wire), 6.0 ohm/phase, @ 0.84 A/phase, 45 in/oz holding torque single shaft measures 0.196" dia and 1/2 " long. The body of the motor measures 1.5" long.

NEW OLD STOCK. Condenser fan motor from Grainger, but box has been sitting in my basement for years. There's a bit of surface rust but the motor is new and will last as long as any other new motor.

C&K Rotary switch, 11 pieces, panel mount with D-shaped shaft, all plastic except for contacts, actually the shaft has 3 positions, these were made for an application and may or may not suit yours. You get all 11 for the one price. For more Pictures click on these links: Image01 TERMS

This MADE IN USA motor is fully functional. It has been cleaned and re-oiled. It has low hours as a fan motor.

Lin Engineering NEW 200 s/rev (1.8degree) Bipolar (4 wire) stepper motor NEMA size 17, Rated at 1.5 Ohms and 1.7 Amps per phase. Holding torque is 62 in/oz the body measures 1.5" long. The shaft is 0.196" in diameter and 7/8" long.