bolt sleeve for sale, brand-new and used.

Model# PP05H080V1 **Call Us At 877-283-7614 or Email Us at megan@polarcompressor.com For A Lead Time / Shipping Quote**

Please Call Us At 877-283-7614 or Email Us For A Lead Time This Compressor is locally Priced at $1,850.00 BUY FACTORY DIRECT & SAVE BIG Fully Packaged!

Please Call Us At 877-283-7614 or Email Us For A Lead Time

(25) VERSATILE RING LUG TERMINAL CONNECTORS #8/M4 SCREWS/BOLTS/STUDS,18 GA WIRE,JOINTING SLEEVE RARE INTERNAL TOOTH LOCK WASHER RINGS Strip Connectors - You Cut Lugs In Various Lengths as You Need New old stock (NOS). Rare, versatile Internal Tooth Lockwasher Ring Lug Crimp/Solder Terminal Connectors. Ring lugs are non-insulated bare open-sleeve (jointing sleeve).

Welcome to BE Quality Industrial. Most items are purchased from Nuclear Power Plants and all are of the absolute highest standards and quality. You are buying the best of the best for a fraction of the cost.

New indivdal pack one was open for picture onlyHillman 1/2 X 3" Hex Nut Sleeve Anchors for Concrete, Brick Block You are buying A of lot 12with washer,bolt sleeve and nut Pleas

3/8 x 3" Sleeve Anchor w/ Nut & Washer Zinc Plated The anchor consists of a threaded stud with an outwardly flared cone-shaped end. A tubular expander sleeve is assembled over the stud and butted against the small diameter of the cone. A washer and hex nut are then assembled on the stud to complete the anchor.

Hotsy Ceramic Sleeve / Plunger Kit To replace broken or cracked ceramic plunger sleeves on Hotsy Pumps H500 or HC940R, use this 22mm 8.717-601.0 Hotsy Pump Ceramic Plunger Kit. Includes ONE EACH of ceramic piston sleeve, plunger bolt, o-ring and copper spacer. REPLACES PART NUMBERS 877659, 87176010, 70-260102 Brand new!

Hotsy Ceramic Sleeve / Plunger Kit Use this 8.717-670.0 Hotsy Pump 20 mm Ceramic Piston Sleeve Kit to replace ceramic plungers on Hotsy pumps HC165, HC165R, HC168R. Repair kit includes ONE EACH ceramic sleeve, plunger bolt, o-ring and copper spacer. For above Duplex Piston Pumps, you will need TWO KITS to replace both ceramic plunger sleeves.

5 Pcs M8 x 60mm Hex Nut Sleeve Expansion Anchor Screws

You are buying 1 Ilsco CTL-750 Long Barrel Compression Sleeve; 750 KCMIL, Black. See image for more details.

Lot of 12 anchor bolts 3/4" X 4". Note: the outside dia. is: 3/4" and the overall length is: 5" The length of the sleeve is 4".

Get Expert Advice -> Save Time and Money On Average we deliver 30% Savings to Our Customers

Ford Meter Box Company Ultra Flex 4" Coupling FC2W-4. 4 bolt, 7" long sleeve, 5/8" bolt diameter. These are brand new, never been us

Part Number HN-3440 Item Weight 3.2 pounds Size 3/4" x 4" Material

Lot of 2 bags - 40 pieces total. (1 bag of 20 each black and 1 bag of 20 each red) BANANA AND TIP BINDING POSTS CONNECTOR, PANEL MOUNT, BLACK; RED Manufacturer: MC (MULTI CONTACT USA) (Precision Electrical & Electronic Connectors) Manufacturer Part No: 23.0410-21 (Black); 23.0410-22 (Red) Series: SPK4 Contact Termination: Screw Current Rating: 32A Voltage Rating:

1661UC1E.52 New ETC Large Tin Plated, Solid Copper, Wire / Cable Electrical Terminal Lugs, Part Number Unknown. Each bid quantity is for a Lot of Ten (10) Lugs. You may bid / buy any number of lots, up to the total quantity available above.

Qty: 1000 RB717 Thomas & Betts STA-KON RING TERMINAL, VINYL INSULATED BRAND NEW UNOPENED BOX Pressure Terminal Connector Features: These terminals are self-insulated with a PVC insulation sleeve of extra length to give protection and relieve bending stress at wire's flex point. Brazed seam barrel is serrated to obtain high pull-out value. FOR 1/4" BOLT UL LISTED 18-14 AWG COPPER WIRE NO.