This CBDM 135/60 Differential Pressure Meter is a precision measuring instrument designed to measure the differential pressure of liquids between two points in a pressurized system. The instrument can cover a broad range of differential pressures with accuracies of + 3 -2-3 full scale (ascending). Both gauges are protected against over-range to the maximum working pressure of the system.
JB INDUSTRIES "THE SHIELD" Part# SHLD-P12 The Shield refrigerant locking cap is the best option to meet both the IMC and IRC codes. The Shield uses a patent pending all brass design to provide great protection without corrosion. The Shield Features include: - All brass design, no corrosion - 12 pack (1/4"), R410 REFRIGERANT SYSTEMS WITH 1/4" MALE FLARE FITTINGS.
Yellow Jacket 42024 Manifold 3-1/8" Gauges, 60" Hose Set for R-410a - NEW! Color-coded scales Sliding double “O” ring pistons reduce wear Long life nylon seats Forged brass body for durability Full porting maximizes capacity and flow Some models include color-coded, 60" PLUS II™ hoses with standard 1/4" flare fittings Hose assemblies UL recognized for 4000 psi (275 bar) burst and 800 psi (55 bar) working pressure. File# SA9737 Made in the USA
Yellow Jacket 42007 Manifold Gauge w/60" PLUS II RYB Hose Set for R-12/22/134a - NEW! MADE IN USA!! Color-coded scales Sliding double “O” ring pistons reduce wear Long life nylon seats Forged brass body for durability Full porting maximizes capacity and flow Some models include color-coded, 60" PLUS II™ hoses with standard 1/4" flare fittings Hose assemblies UL recognized for 4000 psi (275 bar) burst and 800 psi (55 bar) working pressure.
Yellow Jacket 42004 manifold with 60" RYB PLUS II hoses with standard fittings for R-22/404a/410a Series 41 manifolds with larger, easier to read 3-1/8" color-coded gauges in rugged steel cases with polycarbonate crystals. These gauges feature 1% accuracy (Class 1) for an exact reading in critical charge systems. Color-coded scales Sliding double “O” ring pistons reduce wear Long life nylon seats Forged brass body for
Ritchie Yellow Jacket 42004 Series 41 Manifold with 60" PLUS II™ standard fitting hoses, and 3-1/8" gauges. All tools are new and in the original factory packaging. Series 41 manifolds with larger, easier to read 3-1/8" color-coded gauges in rugged steel cases with polycarbonate crystals.
PRO MAX, MINI MAX Refrigerant Recovery Pre-Filter KIT If you own a freon/refrigerant recovery/recycle unit then you know how important it is to take care of it. Most of the damage that occurs to recovery units is from foreign material entering the recovery unit and damaging the compressor. If your recovery unit has a ""OIL-LESS" compressor, it is even more critical that you prevent foreign material from
3/8" Brass Power Steering Adapter inverted flare to 16 X 1.5mm with o-ring. We use this adapter to thread into 1984 Corvette fuel filter to acommodate 3/8" fuel line with standard fittings.
?Single Stage (500 Microns) ?For A/C And Refrigeration Evacuation ?All Metal Construction ?Dual Voltage 1/4 Motor ?Brass Fittings ?Male Flare Intake Parts: 1/4 x 3/8" SAE And 1/2" ACME ?Blank Off Insulation Valve ?6' Power Cord
For your consideration is a mixed lot of stainless steel and brass flare fittings that where part of a demo from a Aircraft manufacture in the 80s. Most of the fittings are 1/2 male to 1/2 flare ,some are female fip reducing flare adapters and mix of unique fittings. All are used and sold as is shipping cost is for the USA ONLY THANKS.
PLUMBING LOT 5-1/2 INCH COPPER MALE ADAPTERS,1/2 " SWEAT X 1/2" IPS4- I/2 COPPER COUPLINGS SWEAT4 3/4 INCH BRASS PLUGS,SWEATONE USED TUBING CUTTER,NICE SHAPE WITH FLARE SLOT IN WHEEL,CUTTING WHEEL IS IN GOOD SHAPE ,NO CHIPS IN WHEELAND ONE EXTRA THINGALL ABOVE FITTING ARE SWEAT FITTINGS EXCEPT THE ONES WITH PIPE THREADS
New solid brass copper 3/8 FGH hose 3/8 comp 3/8 to 1/2 pipe 3/8 to 3/8 pipe fittings For your plumbing parts inventory: a selection of all new solid brass fittings and solid copper, in common sizes. Compression, hose, flare, straight, elbow. The new solid copper sweat is 1/2" tubing to 1/2" NPT pipe.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
