bushing 1 x 3 4 for sale, brand-new and used.

Up for consideration are SIX float switches made by Safe-T-Switch model SS1 The SS1 detects down stream clogs in condensate drains and interrupts the thermostat circuit to shut off the unit before flooding occurs. The Model SS1 installs inline at any downward slope from vertical to horizontal. It can also be installed

1 Male x 3/4 Female Pipe Size, Hex Reducing Bushing; Max PSI: 200 psi @ 72° F; 125 psi; Finish: Brass Our Company is USTC, short for United States Thermoelectric Consortium. We are an original equipment manufacturer in Chico

ebay

diameter 10" 1" thick 1.25" hole with bushing max 2674 R.P.M. Shipping: Winner pays actual shipping cost. There is

Thank You For Looking At Our Products Product Information:duMont Keyway Broach Product Features & Specifications:3/8" SizeC Style

New!! .0995" ID Precision Drill Bushings. Number Drill size #39.

 

This auction is for a 1-3/4" OD tool holder bushing. It is a split style bushing. The ID size for this auction is stated on the title of the auction.

-New steel shaft reducing bushing -Slips over 5/8 shaft and accepts 3/4 pulley or gear etc. -3/16" open slot for keyway or set screw -Zinc plated steel -I.D.: 5/8" -Length: 1-1/4" -O.D.: 3/4"

 

1 Pc. style SF, Slip Fixed renewable drill bushing. 13/32"(.406) I.D.X 3/4" O.D.

NEW BRASS FLANGED BUSHING Rough Specifications: 1 1/2" Flange O.D. Bushing O.D. = 1 1/4" Bushing I.D.

Dodge 119628, Finished Bore with Keyway Taper Locking Bushing, Size: 2517, Bore Dia. 42mm Finished with Keyway This is new but has a few spots of rust on surface from being stored in storeroom.Rust can be removed but does and will not effect the working of the

Split Taper Bushing For sale is a Browning Q1 1-3/8" Split Taper Bushing 5/16 x 3/16" Keyway with No Hardware. The bushing appears to be new but is no longer in the original package. Some light signs of shelf wear may show from the previous owner but nothing that will impact the performance of the product.

Thank You For Looking At Our Products Product Information:Tilting Bushing BlockManufactured by Unique Products Product Features & Specifications:Block Tilts Approximately 30 Degrees

1-1/8" x 1-1/4" x 1-1/2" BRONZE BUSHING CB1820-12

1.25 IN I.D. X 1.502 IN O.D. X 3/4 IN Length, SAE 841 Powdered Metal Bronze, Sleeve Bearing.

Shoulder bushing. Quantity one. Made by DME.