cable lock nut for sale, brand-new and used.

DESCRIPTION: USED, PARKER ROLO FLAIR. THE SIZES ON THE DIES ARE: 1/8, 1/4; 3/8, 1/2, 3/4, 5/8 AND 7/16. THE PREVIOUS OWNER MADE A NEW LOCK DOWN NUT FOR THE TOOL.

Description: CARBIDE TIPPED DIE DRILL 5/16 DURAPOINT #00669 P/N 15003125 USA O-L QTY: 3 USED AND 1 NEW = 4 DRILLS USED; MAY SHOW SIGNS OF USE INVENTORY #2621A

Description: CARBIDE TIPPED DIE DRILL 1/2" DURAPOINT #00437 15005000 USA 1-B (1) USED AND (1) NEW USED; MAY SHOW SIGNS OF USE BUT ARE IN GREAT SHAPE

Description: CARBIDE TIPPED DIE DRILL 27/64 DURAPOINT #03062 15004219 USA 10-0 NEW; OLD STOCK INVENTORY #2521A

Description: CARBIDE TIPPED DIE DRILL 3/8 DURAPOINT #01694 15003750 USA 10-E USED; MAY SHOW SIGNS OF USE BUT ARE IN GREAT SHAPE

DESCRIPTION:CARBIDE TIPPED DIE DRILL 11/32 DURAPOINT #07011 (150) USA 9-L ITEM IS NEW: OLD STOCK INVENTORY #2558A

DESCRIPTION: #4 MT TWIST DRILL NATIONAL 4 1/2 FLUTE LENGTH 11 3/4" OVERALL LENGTH INVENTORY #2423A USED; MAY SHOW SIGNS OF USE

DESCRIPTION: 15/16 TWIST DRILL CHICAGO LATROBE 12MM TURNED DOWN SHANK 3" FLUTE LENGTH 8-1/8" OVERALL LENGTH USED; MAY SHOW SIGNS OF USE INVENTORY #2421A

DESCRIPTION: #2 MT 25/32 TWIST DRILL TRW 4-7/8" FLUTE LENGTH 9-3/4" OVERALL LENGTH USED; MAY SHOW SIGNS OF USE INVENTORY #2417A

DESCRIPTION: #3 MT 27/32 TWIST DRILL 5-1/4" FLUTE LENGTH 11-1/16" OVERALL LENGTH USED; MAY SHOW SIGNS OF USE INVENTORY #2416A

DESCRIPTION: #2MT 25/32 TWIST DRILL MORSE 3" FLUTE LENGTH 7-3/4" OVERALL LENGTH INVENTORY #2427A USED; MAY SHOW SIGNS OF USE - NEEDS SHARPENING

DESCRIPTION: #1 MORSE TAPER SHANK DRILL BIT 17/64 6-1/4" OVERALL LENGTH QTY: 1 NEW; OLD STOCK INVENTORY #2331A

Assorted Asymtek M-2000 Spare Parts. PART NUMBER 955055 Seal, Fluoroly .313 x .125, Quantity of 2

This is our 4x4 CNC plasma and mill with rapids over 500 ipm. The reason we can say plasma as well as mill, is that we use 25mm rail and carriage bearings, not skate or groove bearings, which are held in place with spring on the stepper. We’ve used 15mm wide rack and pinion out of harden steel, and while others may use plastic or narrow gear racks, that can’t hold the stress needed to do the milling, our unit uses 15mm rack with 20 tooth pinion, so it has plenty of speed for plasma.