ccmt insert for sale, brand-new and used.

4 Piece SCLCR Indexable Boring Bar Set Boring Diameters: 3/8", 1/2", 5/8", 3/4" Uses CCMT 80° Diamond Inserts - Insert Included with each bar

This boring bar has a lead angle of -5 degrees. Minimum bore diameter is 0.812". Insert gauge is CCMT 2[1.5]1.

Product description: Toolholder Size: 7x125mm (.275" x 5") Mim,Bor :8.5mm (.335") Insert:CCMT0602 (CCMT21.5)

Product description Model: SCLCR1010H06 Shank Diamter Square:10mm Shank Overall L: 80mm Accept Insert: CCMT0602 Insert I.C: 6.35mm (1/4") T;2.38mm Insert Not Included

Product Description: S12M-SCLCR09 12 x150mm Boring bar Shank D:12mm Overall L:150mm Lead Angle :93 Degree Min. Bore:16mm SCLCR1212H09 Right Hand External Turning Tool Holder Shank Square D:12mm Overall L:100mm Direction:RH Lead Angle :93 Degree SCLCL1212H09 Left Hand Exte

HHIP 1001-0026 3/8 x 6 Inch Shank S-SCLCR6-2 Indexable Boring Bar with Insert Utilizes CCMT-21.5 80 degrees diamond inserts. 7 degrees Relief angle. Negative 5 degrees Lead angle for boring.

Sandvik Coromant SCLCR 2020K 12 Turning Insert Holder, Square Shank, Steel, External, Screw Clamp, Right Hand, 20mm Width x 20mm Height Shank, 125mm Length x 25mm Width, CCMT 432 Insert Size

Indexable Boring Head 30mm Complete with CCMT 060204 Carbide Insert with Torx Key & Screw

Indexable Boring Head 35mm Complete with CCMT 060204 Carbide Insert with Torx Key & Screw

INDEXABLE BORING BAR - STFCR SET INDEXABLE LATHE BORING BAR SET SCLCR WITH CARBIDE INSERTS SCLCR IMPERIAL SIZE - BORING BAR SET 5 PCS BORING BAR SET 1. Shank Size: .315 X 4", Min. Bore: .354 2.

HHIP 1001-0030 1 x 12 Inch Shank S-SCLCR16-3 Indexable Boring Bar with Insert

INDEXABLE LATHE BORING BAR SET SCLCR WITH CARBIDE INSERTS SCLCR IMPERIAL SIZE - BORING BAR SET 5 PCS BORING BAR SET 1. Shank Size: .315 X 4", Min. Bore: .354 2.

Specification:

Specification:

Shank D:6mm Overall L:100mm Min.Bore:8.5mm Direction: Right Hand Lead Cutting Angle : 95 Degree Product fea

SHARS 5/16" INDEXABLE TURNING & BORING TOOL 5PCS SET NEW Product Code 404-1094 Product description Shank Size: 5/16 Insert Style: CCGX, CCMT, SCMT, VCMT Insert Size:21.51, 21.52 Num Pieces: 5

* Extreme fine nickel plated gloss finish, 1-1/2" shank carbide indexable boring bars. 14" overall length. * Using 80degree carbide CCMT inserts negative 5 degree end and side cutting angle.

Price is for ( 10 pieces ) New SANDVIK Inserts CCMT 12 04 12-KR 3215 CCMT 433-KR 3215