cove router bit for sale, brand-new and used.

From the Manufacturer Since 1972, Amana Tool has

Brand new, never used 1/2" diameter cove box router bit with carbide cutting edges and 1/2" shank. These bits are used to make half round coves of varying diameters up to a depth equal to the diameter of the bit leaving a long channel as in round fluted trim. Bit fits all 1/2" shank portable and table routers.

Brand new, never used 1/4" diameter cove box router bit with carbide cutting edges and 1/2" shank. These bits are used to make half round coves of varying diameters up to a depth equal to the diameter of the bit leaving a long channel as in round fluted trim. Bit fits all 1/2" shank portable and table routers.

Brand new, never used 3/8" diameter cove box router bit with carbide cutting edges and 1/2" shank. These bits are used to make half round coves of varying diameters up to a depth equal to the diameter of the bit leaving a long channel as in round fluted trim. Bit fits all 1/2" shank portable and table routers.

Brand new, never used 5/8" diameter cove box router bit with carbide cutting edges and 1/2" shank. These bits are used to make half round coves of varying diameters up to a depth equal to the diameter of the bit leaving a long channel as in round fluted trim. Bit fits all 1/2" shank portable and table routers.

Brand new, never used 3/8" diameter round nose or core box router bit with carbide cutting edges and 1/2" shank. These bits are used to make half round coves of varying diameters, but unlike a true cove box bit, a round nose bit will extend into the piece farther than the horizontal cut radius. The resulting 3/8" wide fluted channel can be made up to 11/16" deep with this bit.

Brand new, never used 1/4" diameter round nose or core box router bit with carbide cutting edges and 1/2" shank. These bits are used to make half round coves of varying diameters, but unlike a true cove box bit, a round nose bit will extend into the piece farther than the horizontal cut radius. The resulting 1/4" wide fluted channel can be made up to 5/8" deep with this bit.

Brand new, never used 1/2" diameter round nose or core box router bit with carbide cutting edges and 1/2" shank. These bits are used to make half round coves of varying diameters, but unlike a true cove box bit, a round nose bit will extend into the piece farther than the horizontal cut radius. The resulting 1/2" wide fluted channel can be made up to 11/16" deep with this bit.

This is a brand new, never used 3/4" diameter plunge bit with a classical detail. This bit can be used for a variety of tasks including as an alternative to v-groove or cove bottom flutes for trim or sign lettering. Adding a 1/2" x 3/4"o,d bearing to the shaft or a suitable guide bushing to your router's base plate will give it the added functionality of an edge detailing bit.

2 NEW SKIL 1/4" COVE BIT

New sealed 1/4" cove bit

Powerbase - Brand New In Hard Plastic Case 15pc 1/4" Router bit set Includes the following 12.7mm Cove Bit 45` x 30mm Chamfering Bit 10mm Round Over Bit 6.35mm Cove Bit 4mm Radius x 27mm Roman Ogee Bit 13mm Flush Trim Bit 6.35mm x 20mm Straight Bit

Pinske Portacable 3 1/4 HP Cove Router. Router works Great, will need a new cove bit.

Product Description Produce beautiful decorative grooves in molding and furniture with these bits or use them with an edge guide to create decorative edge profiles. From the Manufacturer Freud's cove and bead groove bits are designed to produce beautiful decorative grooves in molding and furniture or use with an edge guide to produce decorative edge profiles.

CMT 800.515.11- 6 piece Cove cabinetmaking router set 1/2" ShankMade in Italy This sets includes: Ogee rail & stile bits: these two perfectly matched tools will eliminate the frustration of setting up reversible cutters. The stile bits also feature shear angles for neater cuts. Cove Raised panel bit with backcutter: this 88,9mm (3-1/2”) diameter bit features a backcutter for milling both the front and the back on the panel in a single cut.

Brand new, never used 1/4" roundover bit with 1/4" shank. Fits all 1/2" shank routers with a simple adapter usually included in with the router itself. C3 Micrograin Carbide cutting edge provides a good balance of strength and durability.

Product Description ROUTER BIT SET - 15 piece 1/4" inch Shank CARBIDE TIP Deluxe Aluminum Case New 1/4" Shanks Includes 15 Bits: Core Box 4 Pcs- Straight Mortlsing V Groove Panel Pilot 1/2" Dovetail 1/2" Flush Trim 1-1/4" Rabbeting 3/8" Round Over 1-3/16" 45 Degree Chamfer,Cove & Roman Ogee INCLUDES HEX KEY Features & Highlights 1/4" Shanks, Baked Enamel Finish

CMT Sommerfeld Cabinet Making Set This item wont last long at this price but feel free to make an offer CMT's Sommerfeld Cabinetmaking 6-piece Router Bit set has the bits you need for making commercial-quality doors and drawers with your heavy router or medium shaper.

Standard Euipment: 2" dia. 6-wing carbide bit, Porter Cable 5.6 amp router, adjusting wrenches, and instruction manual. Features: Quickly removes escess glue from the surface of solid surfacing material Aluminum parts are hard-coated for durability, won't mar solid surface material Fine adjustments provide excellent and precise results Preset to cut 3/8" from inside corner to match radius cove Can be set to cut completely into a 90 deg.