Chicago Pneumatic CP7749 - 1/2 Inch Drive Composite Air Impact Wrench 725 Ft-LBS Brand new in its Seal condition. The Chicago Pneumatic CP7749 is a global tool to compete against the IR2135TiMax and Snap-On MG325. The most convenient side-to-side forward/reverse switch - S2S Technology - for a true one-hand operation.
This is a New Chicago Pneumatic End Plate-Lower for CP & Craftsman Tool Models, Part # CA048440. This Chicago Pneumatic End Plate-Lower will work on the Chicago Pneumatic & Craftsman Tool Models listed below. Please feel free to let us know if you have any questions.
This is a New Chicago Pneumatic Trigger/Throttle for CP Tool Models, Part # CA147017. This Chicago Pneumatic Trigger/Throttle will work on the Chicago Pneumatic Tool Models listed below. Please feel free to let us know if you have any questions.
This is a New Chicago Pneumatic Rotor for CP Tool Models, Part # CA148722. This Chicago Pneumatic Rotor will work on the Chicago Pneumatic Tool Models listed below. Please feel free to let us know if you have any questions.
This is a New Chicago Pneumatic Gasket for CP Tool Models, Part # CA148528. This Chicago Pneumatic Gasket will work on the Chicago Pneumatic Tool Models listed below. Please feel free to let us know if you have any questions.
This is a New Chicago Pneumatic Spring-Throttle for CP Tool Models, Part # CA142464. This Chicago Pneumatic Spring-Throttle will work on the Chicago Pneumatic Tool Models listed below. Please feel free to let us know if you have any questions.
This is a New Chicago Pneumatic 1" Square Drive Anvil, Part # 8940162190. Anvils will eventually wear and break due to extreme torque and this CP Anvil will work for the CP Models listed below. Please feel free to let us know if you have any questions.
CHICAGO PNEUMATIC 611 GASEL 1" HEAVY DUTY IMPACT WRENCH, 1800 FT-LBS, JUST RETURNED FROM MFR REHAB. IT WAS BROKEN DOWN, PARTS REPLACED WITH NEW, FULLY LUBRICATED, AND TESTED. IT IS GUARANTEED TO MEET FACTORY SPECS.
* SUPER DUTY Air Impact Wrench H D CP 941 3/4" NEW Central Puematic. Most common mistake is using a small air line to operate, Recommended 1/2" line for super break away torque of your fasteners. Check out my other items!
THE CP 772 IS IDEAL FOR CHANGING TIRES ON BIG RIGS,WORKING ON FARM EQUIPMENT, CONSTRUCTION EQUIPMENT OR ANY JOB WHERE HEAVY TORQUE IS REQUIRED HARDENED STEEL CASE TEASING THROTTLE DESIGN FOR PRECISE CONTROL HANDLE EXHAUST DIRECTS AIR AWAY FROM WORKPIECE AND OPERATOR ULTIMATE TORQUE IS 700 LBS 3/4" DRIVE PISTOL GRIP HANDLE RECOMMENDED AIR HOSE IS 1/2" REQUIRES 32 CFMS WEIGHT IS APPROX 11 LBS
You are bidding on a NEW CP 772 3/4" impact wrench. It is new in the box and has never been used. We bought a whole pallet of tools and these are the ones we do not need.
You are bidding on a 1952 C-222 Instruction Parts Book Chicago Pneumatic CP-349 Reversible Impact Wrench. Models A, AS & B. 24 pages of detailed pictures and information.
Chicago Pneumatic CP 7778-6 1" Drive Heavy Duty Impact Wrench with 8" Anvil The tool of choice for high volume truck tire and heavy equipment shops. Very durable tool which features a 8" extended anvil for tire work. Please look at pictures we measured the pipe and it was 8 inches so it may be a better model not sure it works great that's all we know
hard hitting Chicago pneumatic 7778-6 1 inch extended anvil impact wrench. tool has been professionally redone, and hits very hard. payment due within three days.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.