cylinder rod end for sale, brand-new and used.

Up for your consideration is a used Vickers TJ Cylinder, 2" bore x 3" stroke, 5/8 shaft, nitrile seals good for 250 psi (Air), side lug mount to securely fasten it in place and a self aligning rod end coupler to boot. It was inspected and tested out good so here it is ready to go to work for you. Any questions feel free to ask and good luck.

REXROTH AIR PNEUMATIC CYLINDER PC C-117662-0020 MOD MF6-HH 2 1/2 X 2 3000 MAX PSI 11 3/4" APPROXIMATE RETRACTED LENGTH 13 3/4" APPROXIMATE EXTRACTED LENGTH 2" STROKE 1 3/4" APPROXIMATE ROD DIAMETE

Here for your consideration are two Hytor(division of Schrader Bellows) Pneumatic Cylinders, removed out of service in very good used condition, accomodations on either end through rod nuts to bolt flanges on head and rod end through the female threads on tie-rod retaining nuts. Other features are 20mm (.788) rod diameter, 5/8-18 threaded rod and front and rear adjustable cushions.

Up for your consideration is a Vickers Pneumatic Cylinder, our paperwork describes this one as lightly used so I listed it as "used" but from inspecting and checking it out I cannot see where there is any appreciable contact to indicate it was ever installed as it looks brand new. It features a rear clevis mount though angle mounts could be added easily enough, 5/8" rod diameter, with 7/16-20 threads on rod end.

Manufacturer: Bimba Part Number: D

PARKER AIR PNEUMATIC CYLINDER SERIES 2A MODEL NO.: 02.50 J2AU14A 4.000 ENVELOPE PRESSURE: 250 PSI AIR 4" STROKE 10" APPROXIMATE RETRACTED LENGTH 14" APPROXIMATE EXTRACTED LENGTH 7/16-20 ROD THREAD 5/8" APPROXIMATE ROD DIAMETER

Model

Model# PP07V080Y1 **Please Call Eaton Compressor At 877-283-7614 or Email Us At megan@polarcompressor.com For A Lead Time**

Model# PP05H080V1 **Call Eaton Compressor At 877-283-7614 or Email Us at megan@polarcompressor.com For A Lead Time** **ACTUAL TANK CONFIGURATION MAY VARY**

Please Call Eaton Compressor at 877-283-7614 or Email Us At megan@polarcompressor.com For A Lead Time

Model

Manufacturer : BimbaPart Number: SR-242-DP Item Condition: New-Unused Listing Number: 272-09949 Specifications

Manufacturer : BimbaPart Number : 507.38-DXPN Item Condition : New-UnusedListing Number : 272-09850 Specifications

New York Supplies New York Supplies Yellow Process

New York Supplies New York Supplies Black Process

New York Supplies New York Supplies Magenta Proces

New York Supplies New York Supplies Cyan Process f

UNUSED, Old Inventory, 3" Bore x 30" Stroke x 2" Rod - Tested to 3000 PSI, SUN counterbalance valve, Double Acting, SAE 6 Ports, Retracted Length 43-1/2", Rod End Cross Tube 4-1/8" wide, O.D. 2-1/2", 1-1/4" Pin, Blind End Cross Tube 4-1/8" wide, O.D. 1-3/4", 1-1/4" Pin, 82 LBS SHIPPING, 11 PCS AVAILABLE

New York Supplies New York Supplies Set of CYMK&nb