delta band saw blades for sale, brand-new and used.

This sale is for ONE previously owned COPY of: Rockwell Manufacturing Company, ROCKWELL-DELTA 14" WOOD CUTTING AND METAL-WOOD CUTTING BAND SAW, PM-1827, (Pittsburgh 1965) 11 pages bound in a slightly dirty cover with "model 28-200" written on it as well as a crease from being folded in half.

I recently purchased a machine that uses a 111" band length and retired my old Delta bandsaw with the 93.5" band length so I have no use for these blades. They are about $160 brand new and I have had this 3/4" blade sharpened twice by Laguna, They are very good at fast turnaround, and this blade can be re-sharpened up to 4 more times, about $45 each time. Carbide tipped blade cuts like a hot knife through butter!

I recently purchased a machine that uses a 111" band length and retired my old Delta bandsaw with the 93.5" band length so I have no use for these blades. They are about $160 brand new and I have had this 1" blade sharpened one time by Laguna, They are very good at fast turnaround, and this blade can be re-sharpened up to 4 more times, about $45 each time. Carbide tipped blade cuts like a hot knife through butter!

Delta Rockwell 14" Metal Cutting Band Saw Operating and Parts List Manual For models: 14" Band Saw Models: 28-300 and others Description: This manual covers the above models of the Rockwell Delta 14" Metal Cutting Band Saws. It covers: Operation, Lubrication, Blades, Blades, exploded parts view, and parts lists. It has 20 pages.

Generic riser block kit re-machined to fit the Delta 14" bandsaw with a 15/16" round upper guide post. Cross references and interchanges with Delta model 28-284 riser block kit 15/16" Diameter Guide Post now reversible for flat or radius end locking screws Colors may vary from picture. 15/16" guide post has a flat milled on one side and a round groove on the other for both types of height adjusting screws, (flat or round end), to bear on and to align the upper guide bracket.

Delta Rockwell 14" Wood & Metal Band Saw Operating and Parts List Manual For models: 14" Band Saw Models: 28-200, 28-285, 28-290, 28-300, 28-380 and others Description: This manual covers the above models Delta Rockwell 14" Wood & Metal cutting Band Saws. It covers: Operation, Lubrication, Blades, Blades, exploded parts view, and parts lists. It has 12 pages.

Delta Rockwell 14" Wood Cutting Band Saw Operating and Parts List Manual For models: 14" Band Saw Models: 28-200, 28-203, 28-230, 28-240, 28-285, 28-290 and others Description: This manual covers the above models of the Delta 14" Wood Cutting Band Saws. It covers: Operation, Lubrication, Blades, Blades, exploded parts view, and parts lists. It has 20 pages.

Delta Rockwell 14" Wood & Metal Band Saw Early Models Operating and Parts List Manual For models: 14" Band Saw Models: 880, 890, 28-205, 28-207, and others Description: This manual covers the Early Models of the Delta Rockwell 14" Wood & Metal cutting Band Saws. It covers: Operation, Lubrication, Blades, Blades, exploded parts view, and parts lists. It has 16 pages.

Delta Rockwell 20" Woodcutting Band Saw Operating and Parts List Manual For models: 20" Band Saw Description: This manual covers the Delta Rockwell 20" Woodcutting Band Saw. It covers: Operation, Assembly Instructions, Lubrication, Blades, Band Saw Operations, Blade Breakage, exploded parts view, and parts lists. It has 16 pages.

The Carter Cobra Coil band saw tension spring replacement provides greater durability, superior strength and is a direct replacement for the spring in most 14" saws. The Cobra Coil gives you the ability to properly tension larger blades to give your 14" saw superior tracking over the stock spring that comes with most saws. This in turn allows you to make straighter more precise cuts.

Up for sale is a used jet vertical/horizontal band saw, model M-HVBS-463. In nice condition overall and ready to be put back in service. The cover of the belts does have a slight crack as the pictures shows - does not affect performance, only cosmetics.

NEO Blade 93.5" long .375" wide .025 thickness These are outstanding blades...just as good as Starrett, Morse, etc. at a much lower price

YOU ARE BUYING 2--NEW OLD STOCK-- BS6-2C-- TUNGSTEN CARBIDE MASONARY BAND SAW BLADES by REM GRIT SHOWN IN MY PICTURES. FOLLOWING IS A BRIEF DESCRIPTION OF THE BLADES: 7' 9 1/2" ( 93 1/2 ) --Long x 3/4" Wide NOTE--THESE BLADES ARE NEW OLD STOCK WITH SURFACE RUST FROM BEING IN STORAGE. RUST WILL NOT HURT THE PERFORMANCE OF THE BLADES.

pack of 5 model 28-032 New old stock

Delta Band Saw Model: 52-977 In excellent working condition. Very lightly used. Machine is very clean (See photos) Includes 2 boxes of extra blades: One boxy has 2 blades and the other has 1 blade (3 blades in total) Local pickup only.