delta dust collector for sale, brand-new and used.

Machine Specs · 5'x10' Working area with 12" gantry clearance · Machine weight 6,000 lbs ·

Putsch Meniconi SVP 950M Vertical Panel Saw

Donaldson / Torit Model DFT3-12 "DownFlo II" Dust Collection System New Approximately 2007 1525-9450 CFM 15 HP Motor Twelve (12) Filters Six (6) Valves 40" x 94.5" x 151.3" Tall 90-100 psi Air Requirement Approx. Weight 2000 Lbs Includes: Silencer, Spark Arrestor (added new 2009) Donaldson Torit "Delta P" Electronic Controls Disconnect Unit includes disassembly and loading on flatbed truck at full purchase price. Contact seller if you need a quotation on flatbed trucking to your destination.

Very Good Condition C.R. ONSRUD 3025 INVERTED PIN ROUTER, 30" Throat capacity, Heavy Duty spindle with oil mist lubrication, 0" - 3" spindle travel, pneumatically controlled by foot pedal, 3-position depth stop, Template mounts on top of workpiece, retractable pin and spindle to eliminate lifting of workpiece, 1/2" self-releasing spindle collet. Includes Delta 1 1/2 HP Single-Stage Dust Collector and Husky Pro 5 HP 26 gallon Belt Compressor.

Considering an edge bander with a corner rounding station? Why ? Save many thousands with this stand alone corner rounder !!

This portable shop can be loaded onto your flatbed with a couple of forklifts. Take it to the work site and put it to work. It has a Rockwell 62-011 Drill Press, a Rockwell Environmental Dust Collector, a Rockwell/Delta Buffer/Sander, a Rockwell 28-3CO Band Saw, a 3" vice with a 6" jaw, and a Strippit Di-Arco 24HFB Brake with Fingers.

Description Spec Value

Powermatic model 100 planer, 3 hp, single phase, updated Byrd cutting head, used only 200 lin. ft.comes with Delta model sf-20 dust collector

Leica Sprinter 150MElectronic Level Package with internal memory and METRIC staff

Description Spec Value

DELTA MODEL 34-771 UNI-SAW W/ TILTING ARBOR (sn L14707) POWERED BY 3 HORSEPOWER, 3 PHASE ELECTRIC MOTOR THIS TABLE SAW IS USED, BUT STILL WORKS GREAT. CAME OUT OF A WORKING SHOP. HAS A 4" DUST COLLECTOR PORT IN THE BASE.

this is a delta 50-765 in great condition it has a 5hp single phase motor 220v it needs new plastic bags but they only cost about $3 each online.this is a very powerful machine that is geared more to the professional cabinet shops but if you got the space at your home shop this will handle all your machines you can also get all the specific details about the 50-765 on deltas website i have some hoses blast gates and connectors to get you started

nice delta table saw 230 460 volt 3 phase power model 34794, comes with dust collector and extra blades

Delta 10 Inch Table Saw: Hand wheel adjusting blade height and tilt. Full width fence (works but will require some repair to internal casting on clamp side). Set up for dust collector.

More woodshop machinery photos at this link: http://www.pleasantstmachinery.com/ and a few videos here too http://www.youtube.com/user/woodworkingmachines#g/u and short youtube clip of 12 inch Powermatic Jointer here:https://www.youtube.com/watch?v=UxHpUNMhi-o Delta 3hp 3ph dust collector, model 50-852. 2 filter cloth bags in good used condition. We ran the 3hp 200/230/460v motor and it performs fine-no heat or bearing issues.

Description Spec Value

Selling my Woodsucker II Cyclone Woodworking Dust Collection System. Woodsucker made their products in the USA, and has been out of business for several years now, but their dust collectors still get raves from the reviewers . .

Nice Used Delta Dust Collector Motor: 2 HP Voltage: 230 Volts / Single Phase Max CFM: 2100 CFM Max Static Pressure: 8 ( Inch water ) Impeller Diameter: 12" Filter Bag: 41 Square Feet Filter Bab Filtration: 1 micron Chip Bag Area: 4.8 Cubic Feet Length: 57" Width: 19" Height: 87" Weight: 132 Lbs

The original filter bag has been replace with the more expensive but more efficient 2-micron canister filter shown in the pictures. It keeps the ambient air cleaner. One unused plastic dust bag is included along with 2 hose sections and two added fixtures shown.