+ Post new Ad
DELTA ROCKWELL / Walker Turner 20" Drill Press - Rack and Thrust Bearing 3 3/4", US $2800 – Picture 0
DELTA ROCKWELL / Walker Turner 20" Drill Press - Rack and Thrust Bearing 3 3/4", US $2800 – Picture 0

Delta Rockwell / Walker Turner 20" Drill Press - Rack And Thrust Bearing 3 3/4"

US $2800

  • Kimberly, Wisconsin, United States
  • Jun 18th
Open on mobile:
QR code
DELTA  ROCKWELL / Walker Turner 20" Drill Press - Rack and Thrust Bearing Part #920-52-010-7291 For 3 3/4" column. *Part is in good condition with all the  ball bearings. Needs to be cleaned and new grease to work smoothly... *Came off a 20-421 delta 20" drill press.. However they are the same on all models that range from 20-400 to 20-538 and all models in between.. Considered 20" drill press ( Old Style) Shipping for this item is $15.00 As always , your consideration of our items is greatly appreciated!

Directions

Similar products from Tools for Drilling & Tapping Equipment

AVK2292 INSERT PROTOTYPE & THREAD REPAIR KIT WITH AA170 TOOL MANDREL/WRENCH

AVK2292 INSERT PROTOTYPE & THREAD REPAIR KIT WITH AA170 TOOL MANDREL/WRENCH

  • Arvada, Colorado, United States
  • Jun 18th
HeliCoil 5546-8 Thread Repair M8 x 1.25 12 Insert & Tool Complete Kit

HeliCoil 5546-8 Thread Repair M8 x 1.25 12 Insert & Tool Complete Kit

  • North Salem, New York, United States
  • Jun 18th
US ELECTRICAL 568974 SUPER DUTY 3/4" DRILL IMPACT 480 RPM 7.5 AMP CORDED USED

US ELECTRICAL 568974 SUPER DUTY 3/4" DRILL IMPACT 480 RPM 7.5 AMP CORDED USED

  • Westerville, Ohio, United States
  • Jun 18th
Rescue Bit 5/16x3rbse0

Rescue Bit 5/16x3rbse0

  • North Salem, New York, United States
  • Jun 18th
COIL-SERT MIDLAND KIT THREAD INSERT REPAIR SCREW 1/4 X 20 MILITARY NEW B

COIL-SERT MIDLAND KIT THREAD INSERT REPAIR SCREW 1/4 X 20 MILITARY NEW B

  • Westerville, Ohio, United States
  • Jun 18th
STANLEY 1/2" DRILL CORDED 127-A 400 RPM 4.7 AMPS 115V #33 CHUCK SCREW TOOL USED

STANLEY 1/2" DRILL CORDED 127-A 400 RPM 4.7 AMPS 115V #33 CHUCK SCREW TOOL USED

  • Westerville, Ohio, United States
  • Jun 18th
Rescue Bit 18x3rbdedp

Rescue Bit 18x3rbdedp

  • North Salem, New York, United States
  • Jun 18th
Mac Tools PDG100

Mac Tools PDG100

  • North Salem, New York, United States
  • Jun 18th
Phase II 265-110 Hand Tapper

Phase II 265-110 Hand Tapper

  • Clatskanie, Oregon, United States
  • Jun 18th
1958 Walker Turner 20" Drill Press - Hand Feed Head Casting - Part# 11-1

1958 Walker Turner 20" Drill Press - Hand Feed Head Casting - Part# 11-1

  • Kimberly, Wisconsin, United States
  • Jun 18th
DELTA ROCKWELL 20" Drill Press - Depth Vernier & Hand Knob #401-02-037-5001

DELTA ROCKWELL 20" Drill Press - Depth Vernier & Hand Knob #401-02-037-5001

  • Kimberly, Wisconsin, United States
  • Jun 18th
Rockwell 17" Swing Floor Type Drill Press

Rockwell 17" Swing Floor Type Drill Press

  • Fort Lauderdale, Florida, United States
  • Jun 18th
29mm High Speed Steel Spade Drill Insert TiN Coat Series #2 T-A 132T-29 NEW 1pc

29mm High Speed Steel Spade Drill Insert TiN Coat Series #2 T-A 132T-29 NEW 1pc

  • Allen Park, Michigan, United States
  • Jun 16th
7/16 Carbide Spade Drill Insert TiALN Coated Series #Z T-A 1C2ZA-0014 NEW 1pc

7/16 Carbide Spade Drill Insert TiALN Coated Series #Z T-A 1C2ZA-0014 NEW 1pc

  • Allen Park, Michigan, United States
  • Jun 16th
20.75mm Premium Cobalt Spade Drill Insert TiCN Coat Series #1 T-A 181N-20.75 1pc

20.75mm Premium Cobalt Spade Drill Insert TiCN Coat Series #1 T-A 181N-20.75 1pc

  • Allen Park, Michigan, United States
  • Jun 16th
25mm 63/64 Carbide Spade Drill Insert TiCN Coated Series #2 T-A 1C52N-25 NEW 1pc

25mm 63/64 Carbide Spade Drill Insert TiCN Coated Series #2 T-A 1C52N-25 NEW 1pc

  • Allen Park, Michigan, United States
  • Jun 16th
11.30 mm Premium Cobalt Spade Drill Insert TiN Coated Series #Z T-A NEW Allied 1

11.30 mm Premium Cobalt Spade Drill Insert TiN Coated Series #Z T-A NEW Allied 1

  • Allen Park, Michigan, United States
  • Jun 16th
3/8 Carbide Spade Drill Insert TiN Coated Series #YT-A 1C2YT-0012 Allied 1pc

3/8 Carbide Spade Drill Insert TiN Coated Series #YT-A 1C2YT-0012 Allied 1pc

  • Allen Park, Michigan, United States
  • Jun 16th
9/16 Super Cobalt Spade Drill Insert TiN Coated Series #0 T-A 150T-0018 NEW 1pc

9/16 Super Cobalt Spade Drill Insert TiN Coated Series #0 T-A 150T-0018 NEW 1pc

  • Allen Park, Michigan, United States
  • Jun 16th
1 15/32 1.4688 Super Cobalt Spade Drill Insert TiN Coated Series #3 153T-0115

1 15/32 1.4688 Super Cobalt Spade Drill Insert TiN Coated Series #3 153T-0115

  • Allen Park, Michigan, United States
  • Jun 16th

People who viewed this item also vieved

Geometric Die Head 5/16" DSA

Geometric Die Head 5/16" DSA

  • Rochester, New York, United States
  • Jan 30th
NATIONAL ACME INTERNAL THREAD DIE HEAD SIZE -RST-1-13/16

NATIONAL ACME INTERNAL THREAD DIE HEAD SIZE -RST-1-13/16

  • Wadley, Alabama, United States
  • Jan 30th
Up to 2 NEW Hardinge Davenport 1/2" Feed Fingers

Up to 2 NEW Hardinge Davenport 1/2" Feed Fingers

  • Rochester, New York, United States
  • Jan 30th
Probe tip for Erowa - 2mm ball new Direct Replacement - Guaranteed

Probe tip for Erowa - 2mm ball new Direct Replacement - Guaranteed

  • Warren, Michigan, United States
  • Jan 30th
TWO Graphite round blanks Machinable Rods 2" x 5" long

TWO Graphite round blanks Machinable Rods 2" x 5" long

  • Lyman, South Carolina, United States
  • Jan 30th
Charmilles Model 400 Eleroda

Charmilles Model 400 Eleroda

  • Alpine, Utah, United States
  • Jan 30th
Dake 10,000 psi manual hydraulic pump for shop press

Dake 10,000 psi manual hydraulic pump for shop press

  • Wyoming, Michigan, United States
  • Jan 30th
Strippit, Amada-Wilson Tool Punch Grinding Fixture

Strippit, Amada-Wilson Tool Punch Grinding Fixture

  • Corona, California, United States
  • Jan 30th
Bur Beaver Model # BB-920 Deburring & Beveling Machine LOC2053

Bur Beaver Model # BB-920 Deburring & Beveling Machine LOC2053

  • Oregon, Ohio, United States
  • Jan 30th
CHEVALIER FSG-618M SURFACE GRINDER VERY LITTLE USE!!!

CHEVALIER FSG-618M SURFACE GRINDER VERY LITTLE USE!!!

  • Louisville, Kentucky, United States
  • Jan 30th
Cogsdill Burnishing tool - 0.625 dia

Cogsdill Burnishing tool - 0.625 dia

  • Saint Charles, Illinois, United States
  • Jan 30th
Cogsdill Burnishing tool - 0.750 dia

Cogsdill Burnishing tool - 0.750 dia

  • Saint Charles, Illinois, United States
  • Jan 30th
Norton BC3-6 Diamond Dresser

Norton BC3-6 Diamond Dresser

  • Kalamazoo, Michigan, United States
  • Jan 30th
Gin Sine Dresser

Gin Sine Dresser

  • Kalamazoo, Michigan, United States
  • Jan 30th
MilesCraft Wheel Ezze Grinding Wheel Dressing Tool 2500

MilesCraft Wheel Ezze Grinding Wheel Dressing Tool 2500

  • Frostproof, Florida, United States
  • Jan 30th
PAIR OF HARDINGE MODEL AHC-6 MULTI TOOL HOLDERS

PAIR OF HARDINGE MODEL AHC-6 MULTI TOOL HOLDERS

  • Ellington, New York, United States
  • Jan 30th
PAIR OF HARDINGE HEAVY DUTY TOOL HOLDERS

PAIR OF HARDINGE HEAVY DUTY TOOL HOLDERS

  • Ellington, New York, United States
  • Jan 30th
INDEXABLE CARBIDE TIPPED LATHE TOOL SET 10MM (3/8") - 5 PIECES - 10 INSERTS TCMT

INDEXABLE CARBIDE TIPPED LATHE TOOL SET 10MM (3/8") - 5 PIECES - 10 INSERTS TCMT

  • DELHI, DELHI, India
  • Jan 30th
2012 Fadal 4020 5 axis TSC extended Z VMC NO RESERVE

2012 Fadal 4020 5 axis TSC extended Z VMC NO RESERVE

  • Santa Paula, California, United States
  • Jan 30th
USED INVOLUTE GEAR CUTTER #3 14P 35-54T 1" Bore Brown And Sharpe

USED INVOLUTE GEAR CUTTER #3 14P 35-54T 1" Bore Brown And Sharpe

  • Kelly, North Carolina, United States
  • Jan 30th
Carboloy 3 Inch Square Sholder Face Mill R220.69-03.00-16G 814 CNC MAZAK

Carboloy 3 Inch Square Sholder Face Mill R220.69-03.00-16G 814 CNC MAZAK

  • Philadelphia, Pennsylvania, United States
  • Jan 30th
10" Dia. 4 Jaws Cushman 10-14C LATHE Chk, Bolt On - no Back Provided

10" Dia. 4 Jaws Cushman 10-14C LATHE Chk, Bolt On - no Back Provided

  • Harrison, New Jersey, United States
  • Jan 30th
Kett Nibbler Model kl 2020 14gage

Kett Nibbler Model kl 2020 14gage

  • Grand Bay, Alabama, United States
  • Jan 30th
Kett Model 2020 Head

Kett Model 2020 Head

  • Grand Bay, Alabama, United States
  • Jan 30th
MACHINIST LATHE MILL Famco 1 Arbor Press

MACHINIST LATHE MILL Famco 1 Arbor Press

  • Morris Plains, New Jersey, United States
  • Jan 30th
20" RDN Cross Cut Saw, Model C-420A

20" RDN Cross Cut Saw, Model C-420A

  • Elk Grove Village, Illinois, United States
  • Jan 30th
2 Arbor Shop Press Plate X-BARS + Two 4"X8" Bed Bars, 4 PC Set, 20 Ton, GROUND

2 Arbor Shop Press Plate X-BARS + Two 4"X8" Bed Bars, 4 PC Set, 20 Ton, GROUND

  • Victor, New York, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies