+ Post new Ad
Rockwell 17" Swing Floor Type Drill Press, US $3200 – Picture 0
Rockwell 17" Swing Floor Type Drill Press, US $3200 – Picture 0

Rockwell 17" Swing Floor Type Drill Press

US $3200

  • Fort Lauderdale, Florida, United States
  • Jun 18th
Open on mobile:
QR code
These Rockwell Drill Presses are in great shape and all function thoroughly.  There are no major defects and the hydraulic components on this press work flawlessly. Our shop has had this press for a few years now and used it occasionally.  It gets the job done every time; however, it is not something that we need anymore.   Estimated Dimensions:  THIS IS A ROCKWELL 17" SWING FLOOR TYPE DRILL PRESS SERIES NO................ 17-600 SERIAL NO..................... 1600915 SWING..................... 17" SPINDLE TAPER............... #2 MT TABLE SIZE................... 20-1/2" X 16" BASE WORKING SURFACE.................. 17" X 12-1/2" COLUMN SIZE.............. 3-1/2" QUILL STROKE................. 5" QUILL DIAMETER.................. 2-1/4" MOTOR HORSEPOWER.................... 1 HP SPEED (5 SPEEDS)............... 270 - 1,425 VOLTAGE........................ 230/460 VOLTS PHASE....................... 3 PHASE MOTOR RPM......................... 1,140 OVERALL DIMENSIONS..................... 21" X 33" X 69" HEIGHT We will work with purchasers to ship this item; however, it is up to the purchaser to set up the shipping and freight arrangements and pay the shipping company BEFORE the item is picked up and shipped. Feel free to contact our office at 954.368.3899.

Directions

Similar products from Tools for Drilling & Tapping Equipment

US ELECTRICAL 568974 SUPER DUTY 3/4" DRILL IMPACT 480 RPM 7.5 AMP CORDED USED

US ELECTRICAL 568974 SUPER DUTY 3/4" DRILL IMPACT 480 RPM 7.5 AMP CORDED USED

  • Westerville, Ohio, United States
  • Jun 18th
Rescue Bit 5/16x3rbse0

Rescue Bit 5/16x3rbse0

  • North Salem, New York, United States
  • Jun 18th
COIL-SERT MIDLAND KIT THREAD INSERT REPAIR SCREW 1/4 X 20 MILITARY NEW B

COIL-SERT MIDLAND KIT THREAD INSERT REPAIR SCREW 1/4 X 20 MILITARY NEW B

  • Westerville, Ohio, United States
  • Jun 18th
STANLEY 1/2" DRILL CORDED 127-A 400 RPM 4.7 AMPS 115V #33 CHUCK SCREW TOOL USED

STANLEY 1/2" DRILL CORDED 127-A 400 RPM 4.7 AMPS 115V #33 CHUCK SCREW TOOL USED

  • Westerville, Ohio, United States
  • Jun 18th
Rescue Bit 18x3rbdedp

Rescue Bit 18x3rbdedp

  • North Salem, New York, United States
  • Jun 18th
Mac Tools PDG100

Mac Tools PDG100

  • North Salem, New York, United States
  • Jun 18th
Phase II 265-110 Hand Tapper

Phase II 265-110 Hand Tapper

  • Clatskanie, Oregon, United States
  • Jun 18th
1958 Walker Turner 20" Drill Press - Hand Feed Head Casting - Part# 11-1

1958 Walker Turner 20" Drill Press - Hand Feed Head Casting - Part# 11-1

  • Kimberly, Wisconsin, United States
  • Jun 18th
DELTA ROCKWELL / Walker Turner 20" Drill Press - Rack and Thrust Bearing 3 3/4"

DELTA ROCKWELL / Walker Turner 20" Drill Press - Rack and Thrust Bearing 3 3/4"

  • Kimberly, Wisconsin, United States
  • Jun 18th
DELTA ROCKWELL 20" Drill Press - Depth Vernier & Hand Knob #401-02-037-5001

DELTA ROCKWELL 20" Drill Press - Depth Vernier & Hand Knob #401-02-037-5001

  • Kimberly, Wisconsin, United States
  • Jun 18th
29mm High Speed Steel Spade Drill Insert TiN Coat Series #2 T-A 132T-29 NEW 1pc

29mm High Speed Steel Spade Drill Insert TiN Coat Series #2 T-A 132T-29 NEW 1pc

  • Allen Park, Michigan, United States
  • Jun 16th
7/16 Carbide Spade Drill Insert TiALN Coated Series #Z T-A 1C2ZA-0014 NEW 1pc

7/16 Carbide Spade Drill Insert TiALN Coated Series #Z T-A 1C2ZA-0014 NEW 1pc

  • Allen Park, Michigan, United States
  • Jun 16th
20.75mm Premium Cobalt Spade Drill Insert TiCN Coat Series #1 T-A 181N-20.75 1pc

20.75mm Premium Cobalt Spade Drill Insert TiCN Coat Series #1 T-A 181N-20.75 1pc

  • Allen Park, Michigan, United States
  • Jun 16th
25mm 63/64 Carbide Spade Drill Insert TiCN Coated Series #2 T-A 1C52N-25 NEW 1pc

25mm 63/64 Carbide Spade Drill Insert TiCN Coated Series #2 T-A 1C52N-25 NEW 1pc

  • Allen Park, Michigan, United States
  • Jun 16th
11.30 mm Premium Cobalt Spade Drill Insert TiN Coated Series #Z T-A NEW Allied 1

11.30 mm Premium Cobalt Spade Drill Insert TiN Coated Series #Z T-A NEW Allied 1

  • Allen Park, Michigan, United States
  • Jun 16th
3/8 Carbide Spade Drill Insert TiN Coated Series #YT-A 1C2YT-0012 Allied 1pc

3/8 Carbide Spade Drill Insert TiN Coated Series #YT-A 1C2YT-0012 Allied 1pc

  • Allen Park, Michigan, United States
  • Jun 16th
9/16 Super Cobalt Spade Drill Insert TiN Coated Series #0 T-A 150T-0018 NEW 1pc

9/16 Super Cobalt Spade Drill Insert TiN Coated Series #0 T-A 150T-0018 NEW 1pc

  • Allen Park, Michigan, United States
  • Jun 16th
1 15/32 1.4688 Super Cobalt Spade Drill Insert TiN Coated Series #3 153T-0115

1 15/32 1.4688 Super Cobalt Spade Drill Insert TiN Coated Series #3 153T-0115

  • Allen Park, Michigan, United States
  • Jun 16th
13mm Super Cobalt Spade Drill Insert TiN Coated Series #0 T-A 150T-13 NEW 1pc

13mm Super Cobalt Spade Drill Insert TiN Coated Series #0 T-A 150T-13 NEW 1pc

  • Allen Park, Michigan, United States
  • Jun 16th
1" Super Cobalt Flat Bottom Spade Drill Insert TiN Coated #2 T-A 152T-0100-FLB

1" Super Cobalt Flat Bottom Spade Drill Insert TiN Coated #2 T-A 152T-0100-FLB

  • Allen Park, Michigan, United States
  • Jun 16th

People who viewed this item also vieved

NATIONAL ACME INTERNAL THREAD DIE HEAD SIZE -RST-1-13/16

NATIONAL ACME INTERNAL THREAD DIE HEAD SIZE -RST-1-13/16

  • Wadley, Alabama, United States
  • Jan 30th
Up to 2 NEW Hardinge Davenport 1/2" Feed Fingers

Up to 2 NEW Hardinge Davenport 1/2" Feed Fingers

  • Rochester, New York, United States
  • Jan 30th
BROWN & SHARPE #20C DUAL BIT TOOLING HEADS for AUTOMATIC SCREW MACHINES!!sj

BROWN & SHARPE #20C DUAL BIT TOOLING HEADS for AUTOMATIC SCREW MACHINES!!sj

  • Chula Vista, California, United States
  • Jan 30th
Probe tip for Erowa - 2mm ball new Direct Replacement - Guaranteed

Probe tip for Erowa - 2mm ball new Direct Replacement - Guaranteed

  • Warren, Michigan, United States
  • Jan 30th
TWO Graphite round blanks Machinable Rods 2" x 5" long

TWO Graphite round blanks Machinable Rods 2" x 5" long

  • Lyman, South Carolina, United States
  • Jan 30th
Charmilles Model 400 Eleroda

Charmilles Model 400 Eleroda

  • Alpine, Utah, United States
  • Jan 30th
Strippit, Amada-Wilson Tool Punch Grinding Fixture

Strippit, Amada-Wilson Tool Punch Grinding Fixture

  • Corona, California, United States
  • Jan 30th
Bur Beaver Model # BB-920 Deburring & Beveling Machine LOC2053

Bur Beaver Model # BB-920 Deburring & Beveling Machine LOC2053

  • Oregon, Ohio, United States
  • Jan 30th
ERCO MODEL 1447 Shrink machine, Kick machine shrinker Stretcher with dies

ERCO MODEL 1447 Shrink machine, Kick machine shrinker Stretcher with dies

  • Oregon, Ohio, United States
  • Jan 30th
Cogsdill Burnishing tool - 0.625 dia

Cogsdill Burnishing tool - 0.625 dia

  • Saint Charles, Illinois, United States
  • Jan 30th
Cogsdill Burnishing tool - 0.750 dia

Cogsdill Burnishing tool - 0.750 dia

  • Saint Charles, Illinois, United States
  • Jan 30th
G. Wiedeke Burnishing tool - 1.000 dia

G. Wiedeke Burnishing tool - 1.000 dia

  • Saint Charles, Illinois, United States
  • Jan 30th
MilesCraft Wheel Ezze Grinding Wheel Dressing Tool 2500

MilesCraft Wheel Ezze Grinding Wheel Dressing Tool 2500

  • Frostproof, Florida, United States
  • Jan 30th
Grinding Lead Motorized Center Fixture

Grinding Lead Motorized Center Fixture

  • Danville, Illinois, United States
  • Jan 30th
DIAFORM GRINDING WHEEL DRESSER W/MAHOGANY CASE+KEY + MISC ***SUPERB***

DIAFORM GRINDING WHEEL DRESSER W/MAHOGANY CASE+KEY + MISC ***SUPERB***

  • Highland, New York, United States
  • Jan 30th
PAIR OF HARDINGE HEAVY DUTY TOOL HOLDERS

PAIR OF HARDINGE HEAVY DUTY TOOL HOLDERS

  • Ellington, New York, United States
  • Jan 30th
INDEXABLE CARBIDE TIPPED LATHE TOOL SET 10MM (3/8") - 5 PIECES - 10 INSERTS TCMT

INDEXABLE CARBIDE TIPPED LATHE TOOL SET 10MM (3/8") - 5 PIECES - 10 INSERTS TCMT

  • DELHI, DELHI, India
  • Jan 30th
Lathe Steady Rest

Lathe Steady Rest

  • Holyoke, Massachusetts, United States
  • Jan 30th
USED INVOLUTE GEAR CUTTER #3 14P 35-54T 1" Bore Brown And Sharpe

USED INVOLUTE GEAR CUTTER #3 14P 35-54T 1" Bore Brown And Sharpe

  • Kelly, North Carolina, United States
  • Jan 30th
Carboloy 3 Inch Square Sholder Face Mill R220.69-03.00-16G 814 CNC MAZAK

Carboloy 3 Inch Square Sholder Face Mill R220.69-03.00-16G 814 CNC MAZAK

  • Philadelphia, Pennsylvania, United States
  • Jan 30th
Carboloy 3 and 4 Inch Square Sholder Face Mills - CNC MAZAK HAAS MORI Fadal

Carboloy 3 and 4 Inch Square Sholder Face Mills - CNC MAZAK HAAS MORI Fadal

  • Philadelphia, Pennsylvania, United States
  • Jan 30th
Kett Nibbler Model kl 2020 14gage

Kett Nibbler Model kl 2020 14gage

  • Grand Bay, Alabama, United States
  • Jan 30th
Kett Model 2020 Head

Kett Model 2020 Head

  • Grand Bay, Alabama, United States
  • Jan 30th
ST1112MB-R401-5-3. Offset Rivet Set .401 Shank. Rivet Size 5/32"

ST1112MB-R401-5-3. Offset Rivet Set .401 Shank. Rivet Size 5/32"

  • Wichita, Kansas, United States
  • Jan 30th
20" RDN Cross Cut Saw, Model C-420A

20" RDN Cross Cut Saw, Model C-420A

  • Elk Grove Village, Illinois, United States
  • Jan 30th
2 Arbor Shop Press Plate X-BARS + Two 4"X8" Bed Bars, 4 PC Set, 20 Ton, GROUND

2 Arbor Shop Press Plate X-BARS + Two 4"X8" Bed Bars, 4 PC Set, 20 Ton, GROUND

  • Victor, New York, United States
  • Jan 30th
20" DOALL Model 2013-V Vertical Band Saw, New 1999.

20" DOALL Model 2013-V Vertical Band Saw, New 1999.

  • Dayton, Ohio, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies