dia belt for sale, brand-new and used.

100 ea SS Screens Circle 2.5" Dia. x 0.0016" 20 Mesh JOHNSON 247168 (Off3B) - 2.5 Inch Diameter - Circle Shape - Mesh 20 - Wire 0.0016" - Quantity: 100 - Stainless Steel (( Location Up3B))

100 Johnson SS Screens #102959 Circle 2-1/2" Dia. x 0.016", 20 Mesh (Off4G) - 2-1/2 Inch Diameter - Circle Shape - Mesh 20 - Wire 0.016" - Quantity: 100 - Stainless Steel (( Location Office4G ))

100 Johnson SS Screens #102344 Circle 1-1/2" Dia. x 0.010", 40 Mesh (Off4K) - 1-1/2 Inch Diameter - Circle Shape - Mesh 40 - Wire 0.010" - Quantity: 100 - Stainless Steel (( Location Office4K ))

100 ea SS Screens Circle 2.5" Dia. x 0.020" 14 Mesh JOHNSON 2303494 (Up3B) - 2.5 Inch Diameter - Circle Shape - Mesh 20 - Wire 0.020" - Quantity: 100 - Stainless Steel (( Location Up3B))

NEW Urethane Urethane Belt for Systemation MT-30 Part # 111095 This Product was aquired from a reliable source as part of their

LOWER DRUM COVER AND DISCHARGE CHUTE 2 1/2" O.D. CHUTE DIA. PLASTIC NO CRACKS

FROM MODEL IN LISTING I BELIEVE CRAFTSMAN HAD OTHER MODELS THAT USED THIS TYPE OF TRACKING ADJUSTERS. EXCELLENT CONDITION REF: STUD IS 3/8" DIA. BODY X 5/16 STEP DOWN DIA.

USED ON MANY DELTA MACHINES 71/6-14 THREAD CK BEFORE YOU BID 2 1/2" ACROSS HANDLES 1 1/8" HIGH WITH .600 DIA. C'BORE 1/4" DEEP SO; 7/8 LENGTH OF THREAD NO WASHER OR SPRING GOOD CLEAN "RE-TAPPED" THREAD

Pk of 20 Wej-It #AT3823 Wedge Anchors, 3/8" x 2-3/4", 3/8-16 Thread ~ (Up10A) 20 ea Wedge Anchor Type Full Body Material Z inc Plated Carbon Steel Anchor Dia. 3/8" Anchor Length 2-3/4"

Pk of 10 Redhead WS-5870 Wedge Anchors 5/8" Dia., 7" Long, 5/8-11 Thread (Up10B) Item Wedge Anchor Type Fully Threaded Material Carbon Steel Anchor Dia. 5/8" Anchor Length 7" Thread Size 5/8-11 Thre

Lot of 8 Slatwall Cap Holders :BLACK NEW United Kingdom SHIPPING* Item # SWCAPB BLACK Finish. Categories

You are Buying Used Farmall Power Take Off Flat Belt Pulley Approx 9" in Dia X41/2" Wide, ,You won,t find one in Better Shape.

Easy to use with easy-to-read results. Penetrometer is easy to use: push the indicating ring to the highest point touching the body and insert the piston until the calibration mark is level with the soil. The easy-to-read scale indicates strength from 0 to 4.5 tons per sq ft.

These have hefty 1/2" X 1 1/8" bars with 3/4" dia. screw shafts. These are rated a 2400 lbs.

Lot of 2 NUPLA #15156 Nylon Hammer Tip, 1-1/2" Tip Dia., 5/16-18" Thread Size Item