discharge pump for sale, brand-new and used.

The Forney 75188 4.0mm by 1/4" Male NPT Quick Connect Sludge Pump is a pressure washer sludge pump with 4.0mm orifice for vacuuming up liquid slurries. It is easily attached to pressure washers and turns it into a high output pump. Great for flood clean up, car wash pits, and emptying pools, troughs, ditches or chemical spills.

New in Box. THIS ITEM IS NEW IN THE ORIGINAL BOX Action Pump 5000 Siphon Pump Light Oil-Kerosene-Water Based Chemicals Siphon drum pump for use with kerosene, light oils, and various water-based solvents Hand-operated piston pump action All PVC pump construction for resistance to abrasion, acids, and alkalis Flow rate of 7

PRODUCT OVERVIEW Model # SBA025BC

PRODUCT OVERVIEW

Product Description 1/3HP split capacitor motor - high efficiency - low draw, rugged cast iron construction, 10' grounded water proof power cord, pumps up to 46 gallons per minute, 2760 gallons per hour, side and bottom intake provides for clog resistant suction, vertical float switch with piggy back plug included, cooler operating 115V mo

Beckett CB201TUL Condensate Pump Designed to be user-friendly with features such as a highly reliable micro switch float mechanism and the ability to mount from either side. High-impact ABS construction. Includes a replaceable duck-bill check valve design and convenient discharge with both barb and threads.

Beckett CB202TUL Condensate Pump Designed to be user-friendly with features such as a highly reliable micro switch float mechanism and the ability to mount from either side. High-impact ABS construction. Includes a replaceable duck-bill check valve design and convenient discharge with both barb and threads.

Little Giant 554200 Condensate Removal Pump The VCC-20ULS is designed to be installed where the A/C unit's drain line is too low for the normal condensate removal tank. It includes a safety switch to prevent overflow of the tank in case of blockage in the discharge line. Features a built-in check valve.

Little Giant Submersible Pump NK Series Model: NK-2 Operation: Manual Discharge: 1/4" 230V 50/60Hz 0.9/0.7A 42.5" Cord Submersible, water transfer or recirculation, water displays, air conditioners, machince tool coolants, and mild acids Rated for continuous duty 1/4" MNPT discharge Thermal overload protection

ITEM IS ON SALE FOR LIMITED TIME New old stock This item does not appear to be used from looking at suction and discharge once caps are removed Bottom bolt holes are 3 3/8" from front to back and 4 1/2", Shaft Dia. 9/16" that increses to 3/4" and also has a slot cut from it, back bolt holes are 3 3/16" wide by 4 1/2" tall. I will post the weight of this item as well as photos shortly.

var itemNumber = window.ebayItemID ?

var itemNumber = window.ebayItemID ?

var itemNumber = window.ebayItemID ?