dish a wheel for sale, brand-new and used.

Another Henry' Stuff Exclusive Kit. This time around it is "fun with angle grinders!" Inside this kit you get: 2 x 5"x3/8" 5/8" center wire wheel brushes, 1 x dish style wire brush, 1 x 4-1/2"x1/4"x7/8" metal disk, 2 x 5"x1/2"x7/8" metal fast cut, 3 x 36 Grit flap disc, 50 x 3"x1/16"x3/8"

National Diamond Lab D15A2 6" Dish Diamond Wheel. Brand New Wheel. Specificacions: Type: D15A2 with 1/4 Diamond Rim Width Size: 6" x 1 x 1 1/4 Grade: CB100WBB1/8 Diamond Depth

CBN, diamond grinding wheel, Citco, 02-139-0008, WL03390 About 5" in diameter, 1 1/4 inner diameter, 1/4" thick. Sharp on corner.

6" Dish diamond, CBN, grinding wheel, Citco,02-139-3260 WL03588 1 1/4 inner diameter, 5/8" thick. 1/8 Radius on corner.

CBN, dish diamond grinding wheel, 30 degree Citco,cinetic WL03605 02-139-0026 About 4" in diameter, 1 1/4 inner diameter, 1/2" thick. About a 3/16 Radius on tip.

diamond grinding wheel,dish, 30degree, 60 degree, appears to be a 1/16 radius About 2 1/2" in diameter. Brand new, never used. 1/2 inner hole diameter.

CBN, diamond grinding wheel, 30 degree Citco,cinetic 02-139-0077 ,WL3780 About 2 1/2" in diameter, 1/2 inner diameter, 1/2" thick. About a 3/16 Radius on tip.

4" cup diamond, CBN, grinding wheel, Citco, 02-139-0028, WL03602 1 1/4 inner diameter, 1/2" thick, About 1/16 radius on corner.

6" Dish diamond, CBN, grinding wheel, Citco,02-139-3260 WL03588 on Hub 1 1/4 inner diameter, 5/8" thick. 1/8 Radius on corner.

CBN, Dish diamond grinding wheel, 30 degree Citco,cinetic 02-139-3204 wl03600 About 4" in diameter, 1 1/4 inner diameter, 1/2" thick. About a 1/16 Radius on tip.

National Diamond Lab (Nat Dia Lab) - Blue Lightning BL14/22-A

Click Here. Double your traffic. Get Vendio Gallery - Now FREE!

TTC Dish Style Diamond Wheel - WHEEL DIAMETER: 6" WHEEL THICKNESS: 1" Hole Diameter : 1-1/4" Diamond Depth: 1/8" Rim Width: 1/4" 100 Grit 1/8" 100 GRIT DISH STYLE DIAMOND WHL TTC

Accusize Industrial Tools Canada Quality Machine Shop Welcome to Canada Quality Machine Shop. We supply high quality cutting tools, measuring tools, machine tool accessories, etc. at very good price from Toronto, Canada.

These are 8" wheels used down to 7". These are roughing wheels as they remove metal fast. Care has to be taken not to press hard as the wheel will wear down if you do.

This video takes the viewer, with a damaged 1" X 4 Flute Steel end mill through all the processes of machine set up for both correct angles and clearances, wheel dressing and grinding procedures starting with the Circle grinder pushing the damaged end back and spinning dish into the end of the end mill. Then over to the OD grinder, adjusting the machine and wheel height for grinding the correct radial clearance angles on grinding the OD of the end mill.

Made in U.S.A by CutterMaster. This is used Precision Tool & Cutter Grinder in Good condition. Unit does not have Air-Flow Fixture.

New Automatic Surface Interfacial Tensiometer BZY-102 Platinum Ring method