Edgebander Edge Bander Holzher Triathlon 1487, Yr 2003

US $19,900.00

Bangkok, thailand, Thailand
Jan 30th

Open on mobile:
QR code

Edgebander Edge bander Holzher Triathlon 1487, yr 2003 Units came from Company in Woodworking company in CA, United States, machine currently located in Bangkok, Thailand. In great working condition ready to be shipped. Stock # AM08008 Official VDO: http://holzher.com/pdf/HH___Edgebanders.MPG Controller: SPK 18000, Width with roller support min 1152 mm, max 2196mm, work piece thickness min 6mm, max 60mm, work piece width x length min 60 x 140mm, electrical 220V, 3P, 50/60Hz, 30A, Year 2003, Made in Germany (New $150,000) Material edge banding: PVC, ABS, Vinyl, Wood Stripe. Glue: Hot Melt PVE VDO reference working process for 1407, this machine 1487 has total of 15 stations that can do more. Detail specification: EDGE BANDER Brand / Model: Holzher Triathlon 1487 Nr: 151/ 0-309 Year 2003 Made: German/Austria Overall Size L 7500mm x W 1100 mm x 2000 mm Weight 1800 Kg Width With roller support Min 1152 mm, Max 2196 mm Work Piece Thickness Min 6 mm, Max 60 mm Work Piece width Min 60 mm Work Piece Length Min 140 mm Pressure Roller Approx 450 N Control voltage 24Vdc Compress Air 6 Bar (max 8 bar) Controller SPK 18000 Station 1901 Edge Feeder Fully Automatic Purpose: To hold edging material, either in cut lengths or in coiled form, feed it to the work piece by means of a transport belt and cut it to length if from a coil Edge Length Min 350 mm Edge Height Max 66 mm Edge Thickness (Cut in length) Single 0.3-30mm, Bundle thickness Max. 150mm Edge Thickness (Coiled edging) (Coil plate 820 mm diameter) Depend on material 0.3-30mm, Max 800 mm Connecting Power 230V, 50/60hz, 0.12 KW Compressed Air Max 6 Bar Weight 41 Kg Station 1907 Glueing Station for hot-melt Purpose: Glue application via flat nozzle with electro pneumatic control Glue Type Granulate Heating Up Time 5 min Working temperature depend on Glue type Max 280 C Capacity of supply container 4 Kg Compressed Air 6 Bar Heater Capacity Nozzle heater 0.5 KW, 220V (4KW) Working thickness 6-60 mm at 8-25m/min feed Working Length Approx 6000 mm with 60mm thickness Weight 56 Kg Station 1926 Pneumatic Motor-Assisted (Pressure Unit Roller) Purpose: Pressure Units for straight edge Edge thickness Max 30 mm Edge height Max 66 mm Work piece Feed rate Max 25 m / min Compressed Air 6 bar Electrical Voltage 110 V, 50/60 Hz Weight 50 Kg Station 1915 / 1916 End Trimming Unit Purpose: Front unit cuts from top downwards, rear unit cuts from bottom upwards, swivel adjustments of units 0 to 10 deg Edge band thickness Max 30 mm @ feed 11 m/min Max 20 mm @ feed 15 m/min Max 10 mm @ feed 20 m/min Less 10 mm @ feed 25 m/min Edge band Height Max 66 mm Edge band projection Front max: 60 mm, rear max 100 mm Work piece Length Min 140 mm Compressed Air 6 bar Motor rating 0.55 kw (each motor, 5500 RPM @50Hz) Weight 98 Kg Station 1962 Flush-Trimming Purpose: Router Unit to machine edges on one or both sides. Cut them flush or remove edges surplus. Top and bottom cutting in conventional, vertically tracing, router unit does not swivel. Edge thickness Max 30 mm Edge height Max 66 mm Edge Surplus Max 3 mm Cutting Cross Section Approx 90 sq.mm Adjustment of tracer rollers to cutting circle - 1mm, +6mm Displacement travel of router, horizontal 60 mm Motor output 2 x 1.86 KW @12000 RPM Weight 85 Kg Station 1966 MOT 5 Multi-Cutter Purpose: The cutter unit is for processing edging glued to the edges of panels or similar workpieces, made of wood, at top and bottom, in identical or different ways. Trimming may be to radius or chamfer or simply flush. Cutting Tool Multi Cutter; various versions Setting Motor Assisted setting of both horizontal tracers , the axial path of both cutters and the entire unit. Other settings manuals Tilt Range (0-45 deg) 45 deg fixed Edging width Max 66 mm Edging Thickness Standard Cutter max 15 mm Special Cutter max 25 mm Multi Cutter 6 mm Adjustment Path Tracer Rollers to cutting circle +/- 6mm Horizontal Unit 60 mm Cutter unit, top and bottom, horizontal, independent from each other 30 mm Cutter unit in axial direction (model multi-cutter) 30 mm Cutting section at feed speeds 20 m/min = 45 sq. mm 16 m/min = 60 sq. mm 12 m/min = 75 sq. mm Cutter motor 230V/400V, 200Hz, 2 x 1KW, 12000RPM Station 1962 Flush-Trimming (Bottom trim) Note: Single motor only Station 1931 Profile Shaping Unit (2 Stations Continuously TOP + BOTTOM) Purpose: Use for profiling (using a cutter) or grooving (using a saw blade) the sides of workpieces or the edges glue to the sides of workpiece made of wood over their entire length in upcutting mode. Saw blades/ Cutter Min 100 mm Max 135 mm Width Max 490 mm Height Max 780 mm Depth Max 500 mm Adjustable path tools axial Max 60 mm Adjustable path radial Max 25 mm Cut depth Tool Max 135 mm = depth max 22.5mm Tool Max 100 mm = depth max 5 mm Workpiece length Min 140 mm Weight 119 Kg Motor Power 230V/400V, 200Hz, 6000RPM Station 1944 Buffing unit with plunge control Purpose: Clean Unit Edge Height Max 60 mm Displacement travel of unit 60 mm Vertical Swivel 0-45 deg Horizontal Swivel 0-20 deg Drive Motor Output 2x0.15 KW, 1200RPM Air 6Bar Weight 39Kg Weight: 10,000 - 15,000 lb QTY: 1 unit with accessory Lead Time: Upon Customer Payment accept: Cashier Check Exchange: 40B = $1 Shipping will need to be crated on flatbed. We can help find local and shipping to your destination. Buyer is responsible for shipping cost. 2/2 bangna Trad, Thailand 10540 +66 85 842 2700 TERMS AND CONDITIONS All machines and equipments are offered and sold as it is per terms and conditions unless specified otherwises. SHIPPING & DELIVERY Pricing base on send to United States unless state otherwise. For international shipping, please refer to general guideline. Actual shipping will be quoted when your item won. All items will be shipped within two business days. All shipping costs are to be paid by the buyer, and are as stated in the item description. PAYMENT We prefer paypal, but accept checks and money orders. If paying by check, please let us know by e-mail that your payment is on the way (check must be cleared prior to shipment).