Environmental chamber, Humidity/Temperature, 20 cu ft T20RS-1.5 Tenney TESTED, US $5,500.00 – Picture 0

Environmental chamber, Humidity/Temperature, 20 cu ft T20RS-1.5 Tenney TESTED, US $5,500.00 – Picture 1

Environmental chamber, Humidity/Temperature, 20 cu ft T20RS-1.5 Tenney TESTED, US $5,500.00 – Picture 2

Environmental chamber, Humidity/Temperature, 20 cu ft T20RS-1.5 Tenney TESTED, US $5,500.00 – Picture 3

Environmental chamber, Humidity/Temperature, 20 cu ft T20RS-1.5 Tenney TESTED, US $5,500.00 – Picture 4

Environmental chamber, Humidity/Temperature, 20 cu ft T20RS-1.5 Tenney TESTED, US $5,500.00 – Picture 5

Environmental chamber, Humidity/Temperature, 20 cu ft T20RS-1.5 Tenney TESTED, US $5,500.00 – Picture 6

Environmental chamber, Humidity/Temperature, 20 cu ft T20RS-1.5 Tenney TESTED, US $5,500.00 – Picture 7

Environmental chamber, Humidity/Temperature, 20 cu ft T20RS-1.5 Tenney TESTED, US $5,500.00 – Picture 8

Environmental Chamber, Humidity/temperature, 20 Cu Ft T20rs-1.5 Tenney Tested

US $5,500.00

Morgantown, Pennsylvania, United States
Jan 30th

Open on mobile:
QR code

Environmental chamber, Humidity/Temperature, 20 cu ft T20RS-1.5 Tenney TESTED This is a used Tenney 20 cu ft environmental chamber with humidity. Chamber has a temperature range from -40 to 200 deg C and a humidity range of 20 to 95%. Being that this chamber has an internal air-cooled condenser it is completely self-contained and only requires line power and small water lines for the humidity system. We powered up the chamber and ran it down to -40 deg C and it took a few extra minutes to get there than the original specs but once there it maintained the temp very well for a few hours during our test. Unit is in good operating condition with the only flaws being a ding in the front door, few scratches and a foggy front window. Humidity and temperature Temp range: -40 deg C to +200 deg C Humidity range: 20% to 95% relative humidity Performance examples: Cooling: 24 Deg to -40 deg C in 90 minutes (the chamber actually took about 1:10 min) Heating: 24 Deg C to 200 dec C in 60 minutes Controller type: Versatenn III program/control/logic system Comm port: 25 pin DB connector 1.5 HP refrigeration compresor 404 refrigerant Air-cooled Chart recorder: Honeywell DR4300 Dual pen Dimensions: OD: 64 x 39 x 87" ID: 31 x 30 x 36" 20 cubic feet Window: 14 x 15" Includes manual Specifications: MFG: Tenney Model: T20RS-1.5 Serial: 27544-03 Volts: 230 Amps: Phase: Drive: Controls: Manuals: Yes Air: Weight: Lbs Condition: Used Length: 64 Width: 39 Height: 87 All dims inches unless otherwise noted Inventory #: 5697 For more information call 610-286-1655. Please call or email for shipping rates. International purchases: A $40 documentation processing fee will be added to total purchase for items under $150. When communicating with us please use your own email address or call 610-286-1655. We want to know who we are communicating with and we cannot identify specific emails in our inbox using the ebay email system. Send emails to heritageequipment AT gmail.com The new ebay buyer protection program has inspired us to offer all of our items “as-is”.This does not mean that you are buying a machine with deficiencies, known or unknown. What it means is that some of our items will be tested and will include the results in the description and others will be untested but described accurately to the extent that is possible without actually powering up the machine. In addition to this written description you will have the opportunity to view high quality photos of the item. With these two sources of information you will have as much information as possible without being physically here to inspect the machine. Feel assured that we will make a diligent effort to give you an accurate description of the equipment. As a buyer you should be aware that you are buying an expensive piece of equipment at a greatly reduced price and as such you may have to deal with certain unknowns and defective components which were not known and could not be known without full scale setup and operation of the machine. Our experience in dealing with many specialized pieces of equipment has proven this to be a rare occurrence however it is a risk inherent in buying used equipment. The very few times we have had to deal with these issues we have been very helpful in resolving the problem.

Condition	Used : An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes	“Used”