+ Post new Ad
FastBack Soft Jaws Set - Machined, US $97.53 – Picture 0
FastBack Soft Jaws Set - Machined, US $97.53 – Picture 0

Fastback Soft Jaws Set - Machined

US $97.53

  • Monmouth, Oregon, United States
  • Jan 30th
Open on mobile:
QR code
FastBack Interchange System Based around the patented FastBack Bolt, this quick-change system allows the jaw to be changed in 3 strokes! This greatly increases productivity by reducing vise change setup time. rnrnThe jaws change easily without opening the vise or fastening bolts more than a single turn. A pair of vise jaws changes out in under a minute with the vise open or closed. Using a supplied 6-inch hex wrench to reach through the vise body, the FastBack Bolt is loosened, or tightened from the reverse sides of the vise. The system saves valuable set-up time on return jobs because it allows the jaws to be fastened while the parts are already held in the vise. Machinable Soft Jaws Better than your average jaw; our soft jaws have a full inch of machinable width. They are also reversible and can be turned over and used for a second job. Most importantly, the FastBack system will save you valuable time on every setup and get the machines running again quickly. These jaws are machined with through holes on the front to allow the jaw to be changed out from the front or back. Also, a machined back to the jaw ensures that the jaw will align perfectly with your Kurt Vise every time. Set includes 2 - Machined Aluminum Soft Jaws 2 - FastBack Washer Plates 4 - FastBack Bolts 1 - FastBack Wrench

Directions

Similar products from Fittings & Plates

MACHINIST LATHE Large CLEAN Face Plate for South Bend ? Lathe 8 1/2" 1 1/2" Bore

MACHINIST LATHE Large CLEAN Face Plate for South Bend ? Lathe 8 1/2" 1 1/2" Bore

  • Morris Plains, New Jersey, United States
  • Jan 30th
Cleveland Precision Systems Two Axis Positioner Traverser

Cleveland Precision Systems Two Axis Positioner Traverser

  • Wyoming, Michigan, United States
  • Jan 30th
LATHE FACE PLATE 16" with D1-6 MOUNT

LATHE FACE PLATE 16" with D1-6 MOUNT

  • Baltimore, Maryland, United States
  • Jan 30th
new DAVENPORT 5080-57 Chuck & Feed Cam C Lever Support

new DAVENPORT 5080-57 Chuck & Feed Cam C Lever Support

  • Champlain, New York, United States
  • Jan 30th
Adjustable Steel Welding Table 19-7/8" (W) x 30" (L) x 32-7/8" (H)

Adjustable Steel Welding Table 19-7/8" (W) x 30" (L) x 32-7/8" (H)

  • Silver Spring, Maryland, United States
  • Jan 30th
SINE PLATE TAFT PEIRCE NO. 9119 USA 11 1/2" X 4"

SINE PLATE TAFT PEIRCE NO. 9119 USA 11 1/2" X 4"

  • East Brunswick, New Jersey, United States
  • Jan 30th
Steel T-Slotted Welding Table Welding Cast Iron Layout Plate Fixture 42"x 30"

Steel T-Slotted Welding Table Welding Cast Iron Layout Plate Fixture 42"x 30"

  • Tonawanda, New York, United States
  • Jan 30th
9 X 7 X 6 INCH SLOTTED ANGLE PLATE (WEBBED) (3402-0311)

9 X 7 X 6 INCH SLOTTED ANGLE PLATE (WEBBED) (3402-0311)

  • Chino, California, United States
  • Jan 30th
1/4 Inch Precision Parallel Set (9 Pair)-NEW

1/4 Inch Precision Parallel Set (9 Pair)-NEW

  • Chino, California, United States
  • Jan 30th
#50 Taper Indexing Spindle

#50 Taper Indexing Spindle

  • Olathe, Kansas, United States
  • Jan 30th
MAG * MARO LOCATING PIN DET18 NIB * T.1014.1711-18

MAG * MARO LOCATING PIN DET18 NIB * T.1014.1711-18

  • Sunman, Indiana, United States
  • Jan 30th
Haas auto Pallet Changer midaco

Haas auto Pallet Changer midaco

  • Wyoming, Michigan, United States
  • Jan 30th
HEAVY DUTY TILTING BOX TABLE - RADIAL ARM DRILL PRESS - WORKHOLDING - T-SLOT

HEAVY DUTY TILTING BOX TABLE - RADIAL ARM DRILL PRESS - WORKHOLDING - T-SLOT

  • Chino, California, United States
  • Jan 30th
H/V 5C ANGLE COLLET FIXTURE (4-1/4 INCH H)

H/V 5C ANGLE COLLET FIXTURE (4-1/4 INCH H)

  • Chino, California, United States
  • Jan 30th
Aluminum Angle 1/2” x1/2” x 24 in,1/16 in thick, .5 IN, Angles, New, USA!

Aluminum Angle 1/2” x1/2” x 24 in,1/16 in thick, .5 IN, Angles, New, USA!

  • Old Fort, North Carolina, United States
  • Jan 30th
Aluminum Angle 1-1/2” x 1-1/2” x 24 in, 1/8 in thick, 1.5 IN x 1.5 IN, NEW!,USA!

Aluminum Angle 1-1/2” x 1-1/2” x 24 in, 1/8 in thick, 1.5 IN x 1.5 IN, NEW!,USA!

  • Old Fort, North Carolina, United States
  • Jan 30th
Aluminum Angle 1 1/2” x 1 1/2” x 21.5 in,1/16 in thick, 1.5 x 1.5 in, NEW!, USA!

Aluminum Angle 1 1/2” x 1 1/2” x 21.5 in,1/16 in thick, 1.5 x 1.5 in, NEW!, USA!

  • Old Fort, North Carolina, United States
  • Jan 30th
Vacuum table VT6040GAL CNC CHUCK Engraving or Milling

Vacuum table VT6040GAL CNC CHUCK Engraving or Milling

  • West Greenwich, Rhode Island, United States
  • Jan 30th
Rough Casting for 6" Chuck Back Plate

Rough Casting for 6" Chuck Back Plate

  • Woodstock, Illinois, United States
  • Jan 30th
13" Diameter Face Plate for Lathe

13" Diameter Face Plate for Lathe

  • Lake Villa, Illinois, United States
  • Jan 30th

People who viewed this item also vieved

5C Square Collets, R8 collets & extras

5C Square Collets, R8 collets & extras

  • Oceanside, California, United States
  • May 26th
Hardinge 5c collets

Hardinge 5c collets

  • Oceanside, California, United States
  • May 26th
PARLEC NUMERTAP 7711 - 025 1/4 INCH TAP COLLET CNC MILL BRIDGEPORT MACHINE SHOP

PARLEC NUMERTAP 7711 - 025 1/4 INCH TAP COLLET CNC MILL BRIDGEPORT MACHINE SHOP

  • Xenia, Ohio, United States
  • May 26th
Grizzly 3400-3501 Clamping Kit for 1/2-Inch T-slots, 58-Piece New

Grizzly 3400-3501 Clamping Kit for 1/2-Inch T-slots, 58-Piece New

  • Los Angeles, California, United States
  • May 27th
2 LOT USED KANT TWIST 2" MACHINIST UNIVERSAL T-HANDLE HOLDING CLAMP VGC

2 LOT USED KANT TWIST 2" MACHINIST UNIVERSAL T-HANDLE HOLDING CLAMP VGC

  • Melbourne, Florida, United States
  • May 27th
Vintage No. 304 MACHINIST PARALLEL CLAMP *

Vintage No. 304 MACHINIST PARALLEL CLAMP *

  • Airway Heights, Washington, United States
  • May 27th
New Surplus Ajax 6 1/2" ASM 181 Manual Lathe Chuck Jaw Tool Soft Jaws Machining

New Surplus Ajax 6 1/2" ASM 181 Manual Lathe Chuck Jaw Tool Soft Jaws Machining

  • Oxnard, California, United States
  • May 28th
NEW SET OF 3 RAM PRODUCTS COATED STEEL CHUCK JAWS 454-40 4 3/4" X 1 3/4" X 3 3/4

NEW SET OF 3 RAM PRODUCTS COATED STEEL CHUCK JAWS 454-40 4 3/4" X 1 3/4" X 3 3/4

  • Oxnard, California, United States
  • May 28th
15" 3 Jaw Scroll Chuck, Made In Sweden, Steel 361994

15" 3 Jaw Scroll Chuck, Made In Sweden, Steel 361994

  • Zachary, Louisiana, United States
  • May 28th
ATLAS 618 CRAFTSMAN 6" LATHE READY MT1 LIVE CENTER (TANG SHAVED)

ATLAS 618 CRAFTSMAN 6" LATHE READY MT1 LIVE CENTER (TANG SHAVED)

  • Hatboro, Pennsylvania, United States
  • May 29th
ATLAS 10" CRAFTSMAN 12" LATHE 60 DEGREE MT2 DEAD CENTER IN ORIGINAL BOX

ATLAS 10" CRAFTSMAN 12" LATHE 60 DEGREE MT2 DEAD CENTER IN ORIGINAL BOX

  • Hatboro, Pennsylvania, United States
  • May 29th
ATLAS 618 CRAFTSMAN 6" LATHE IDEAL MT1 LIVE CENTER

ATLAS 618 CRAFTSMAN 6" LATHE IDEAL MT1 LIVE CENTER

  • Hatboro, Pennsylvania, United States
  • May 29th
VINTAGE CRAFTSMAN TILTING DRILL PRESS VISE, 2-1/2", NO RESERVE!

VINTAGE CRAFTSMAN TILTING DRILL PRESS VISE, 2-1/2", NO RESERVE!

  • Belmont, Massachusetts, United States
  • May 29th
DRILL PRESS VISE 2-1/4 Inch Jaw Opening Capacity

DRILL PRESS VISE 2-1/4 Inch Jaw Opening Capacity

  • Spring Valley, New York, United States
  • May 29th
Massive vintage #74 Armstrong pipe vise

Massive vintage #74 Armstrong pipe vise

  • Wheatfield, Indiana, United States
  • May 29th
19-1/2" x 47" Cast Iron Welding / Layout Table, Off Matsuura MC-1000V VMC, (2)

19-1/2" x 47" Cast Iron Welding / Layout Table, Off Matsuura MC-1000V VMC, (2)

  • Grand Rapids, Michigan, United States
  • Jun 5th
18" x 46" Cast Iron Welding / Layout Table, Off Matsuura MC-800VDC VMC, 1991 (3)

18" x 46" Cast Iron Welding / Layout Table, Off Matsuura MC-800VDC VMC, 1991 (3)

  • Grand Rapids, Michigan, United States
  • Jun 5th
18" x 46" Cast Iron Welding / Layout Table, Off Matsuura MC-800VDC VMC, 1991.2

18" x 46" Cast Iron Welding / Layout Table, Off Matsuura MC-800VDC VMC, 1991.2

  • Grand Rapids, Michigan, United States
  • Jun 5th
19 1/2" diameter German Rotary table

19 1/2" diameter German Rotary table

  • Saugus, Massachusetts, United States
  • Jun 9th
Haas Hrt 310

Haas Hrt 310

  • Nampa, Idaho, United States
  • Jun 9th
ZTT-540 T-Slot Table For MDX 540

ZTT-540 T-Slot Table For MDX 540

  • Las Vegas, Nevada, United States
  • Jun 9th
Machinists Tools: V-Block,1-2-3 Blocks, Machinist Jack and More Mill Lathe

Machinists Tools: V-Block,1-2-3 Blocks, Machinist Jack and More Mill Lathe

  • Dallas, Texas, United States
  • Jun 9th
STARRETT V BLOCK & CLAMP No. 278

STARRETT V BLOCK & CLAMP No. 278

  • Tallmadge, Ohio, United States
  • Jun 9th
Starrett No. 568 V Block with 3 bench tools Tapped Holes are 3/8-16. MACHINIST

Starrett No. 568 V Block with 3 bench tools Tapped Holes are 3/8-16. MACHINIST

  • Waterbury, Connecticut, United States
  • Jun 9th
Spellbinders Shapeabilities Die D-Lites-Time Flies

Spellbinders Shapeabilities Die D-Lites-Time Flies

  • Hickory Hills, Illinois, United States
  • Jun 12th
Cubics Interchangeable Needles-Size 11/8mm

Cubics Interchangeable Needles-Size 11/8mm

  • Hickory Hills, Illinois, United States
  • Jun 12th
"Teresa Collins Mounted Stamp 3""X3""-London "

"Teresa Collins Mounted Stamp 3""X3""-London "

  • Hickory Hills, Illinois, United States
  • Jun 12th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies