fiberglass fan for sale, brand-new and used.

Waterproof enclosure with 120Vac and fan. Features: UL® Listed Molded Fiberglass Reinforced Polyester (FRP) industrial Enclosure Stainless steel quick release latches with padlock hasps NEMA Type 3R, 3RX / IP24 rated Fully gasketed raised Vented lid with removable filters & integral mounting flange

International Buyers – PLEASE READ: This item will ship USPS Priority flat rate or USPS first class Intl. There is NO guaranteed arrival time. Shipping time varies from country to country and whether customs decides to inspect the package..

NEW PAPST brand DC-INPUT AXIAL MUFFIN FAN, Model 8412 NH. Airflow at nominal 12 Vdc ( 8-13 volts ), input is 46 cfm. Housing/fan blades are fiberglass-reinforced plastic measuring 3.2" square x 1" thick.

Nominal voltage VDC 48 Nominal voltage range VDC 28 .. 60 Speed min-1 4300 Power input W 37 Min. ambient temperature °C -20 Max.

EMB Papst RL48-19/12 Width (In.): 3 MPN: RL48-19/12 Bearings: Ball SKU: G3198194 Voltage: 12 DC Housing Material: Fiberglass Reinforced Plastic Watts:

Here is a virtually new centrifugal blower motor from EMB-PAPBST.  The motor was previously installed in an assembly that was damaged by water (the motor was never wet only the chassis of the unit it was in).  The unit was new so the only run-time the motor had was during product testing so probably somewhere in the 2 - 3 hour range. These blowers suck air axially in through the center of the blower wheel and discharge it centrifugally 360 degrees from the side.

Impeller material Fibreglass-reinforced plastic (PA) Mass 0.390 kg Dimensions 119 x 119 x 38 mm Housing material Die-cast aluminium Direction of air flow Inlet over bars Direction of rotation Clockwise, looking at rotor Bearing Ball bearings Lifetime L10 at 40 °C 65000 h Lifetime L10 at maxim

International Buyers – PLEASE READ: This item will ship USPS Priority flat rate or USPS first class Intl. There is NO guaranteed arrival time. Shipping time varies from country to country and whether customs decides to inspect the package..

THIS IS A USED BUT IN VERY GOOD CONDITION. NOMINAL VOLTAGE ; 12V NOMINAL VOLTAGE RANGE ; 7-15V SPEED ; 2800 POWER INPUT ; 3.5W AIR FLOW ; 160 SOUND POWER LEVEL ; 5.3 HOUSING ; ALUMINUM IMPELLER ; FIBERGLASS REINFORCED PLASTIC APPROVAL ; VDE, UL, CSA POWER CONNECTION ; TERMINALS (CHANGEABLE) GOOD BUY IF YOU NEED A FAN OF THIS QUALITY. I ONLY ACCEPT PAYPAL.

Includes Step by Step Construction Plans with over 90 High Resolution Photos On CD in PDF format After ton's of requests, here it is. The stuff you need to get a quick start on your Tesla Coil and save a couple hundred bucks in the process ( top line, no dryer tubing!) You get everything listed including: (50) Feet of pure copper tubing (1) 10 amp Variac Use

New Hudson Rechargeable 4 Gallon Sprayer Model 13854 Never Pump - Bak-Pak Sprayer Lead acid battery sprays up to 10 continuous hours on a single charge 72" PVC power sprayer style hose Locking large poly control valve - comfortable thumb operated Extra long 20" fiberglass / poly spray wand Bonus nozzle system include 4 different nozzles Spray pattern: fan, shower, cone, dou

Powerful 870-watt motor. Heat overload protection system. Reinforced fan.

10 TON FIBERGLASS COOLING TOWER 30 GPM 120 VOLT 1/4 HP FAN MOTOR NEW.

start_elivehelp_btncode end_elivehelp_btncode var urlAddress = location.search; var frame = urlAddress.indexOf("ItemDescV4"); if(frame < 0) { var hashSpot = urlAddress.indexOf("hash=item"); if(hashSpot > -1) { var urlAddress = location.pathname; var slashSpot = urlAddress.lastIndexOf("/"); var ebayItemID = urlAddress.substring(slashSpot+1); } else { va

DAYTON 30" EXHAUST FAN / POWER VENTILATION FAN Item # 10D993 NO RESERVE!!! Up for Bidding is a Brand New Dayton 30" Industrial Fan A little about this specific item: This is an open box item. Item is brand new and is missing its factory packaging.

This Item up for auction is a new Dayton Grainger 48" Exhaust fan. The model is 1WDC4. This item is new with original paperwork.

Technical Specs ItemExhaust Fan TypeCorrosion Resistant, High Performance Propeller Dia. (In.)12 CFM @ 0.000-In. SP2200 CFM @ 0.050-In.

Verantis model CH-12 Rated 5300 CFM at 26" at 2800 rpm. Built 05/2011 Impeller and housing built of fiberglass 12" round inlet 18" round outlet 40 HP motor 230/460 3 phase runs at 3600 RPM you would have to use a VFD to run at the recommended 2800 RPM I have two of these, identical except the other one has a 50 HP motor on it. You can have either one.

For sale box of 10 CGW 1-1/2” x 1” x 1/4” firm flap grinding wheels, aluminum oxide, grit 60 These flap grinding wheels made in European Union on equipment designed t

HYDROTRON WET DUST COLLECTOR WITH BOOTH FILTER 1 HYDROTRON BOOTH MODEL HPB-8-1-1 X 10 HP WORK AREA 7.5’ HIGH X 8’ WIDE X 8’ DEEP INSTALLED 2011 AND LIGHTLY USED