finishing end mill for sale, brand-new and used.

Approximately 4 inches long and 1.75 inches tall. Solid brass ORNATE FLORAL design Free Shipping in the U.S.A, HAWAII, GUAM, PUERTO RICO, all MILITARY and US TERRITORIES. for international please ask for quote

Approximately 3 inches around Solid brass ORNATE HISTORIC ROUND Free Shipping in the U.S.A, HAWAII, GUAM, PUERTO RICO, all MILITARY and US TERRITORIES. for international please ask for quote

Approximately 4.25 inches wide and 1.5 inches tall.on 3/16" thick brass Solid brass LOTUS design Free Shipping in the U.S.A, HAWAII, GUAM, PUERTO RICO, all MILITARY and US TERRITORIES.

Grapes Leaves Set They measure 1-3/8" x 2-5/18" at the widest pointsCarved into 3/16" Solid Brass Free Shipping in the U.S.A, US Territories and Military

Manufacturer Refurbhished(High Quality Factory Recoated/Resharp) SGS(Lot of 1) 1" x 1- 1/2" LOC x 4" OAL

Lot of 1 MA FordTuff Kut 1/2" x 3/4" LOC x 3" OAL Solid Carbide TiALN XR7 Coated7 Flute .010CRFinishingEnd Mill

Dijet Mirror Ball Steel Shank Finishing Ball End Mill MBN-300-M16 16MM BALL

This dowel mill was being used in our own chair shop, will handle up to 2-3/8 inch diamter stock.Cost effective to bust square blanks into round turning stock, Use this to save your lathe tooling costs.Quickly busts corners and rounds off square stock as preliminary operation ahead of finishing turnings on your lathe.3ph 3hp, 220/440 volt. Was working when removed from service. Sold as is in used condition.

This General dowel was being used in our own chair shop, head is currently 1.25 inch diameter.Use this to save your lathe tooling costs.Quickly busts corners and rounds off square stock as preliminary operation ahead of finishing turnings on your lathe.General still sells heads.1 phase, 3hp, 220/208 volt. Was working when removed from service. Sold as is in used condition.

LISTING DESCRIPTION GOES HERE

MONSTER-294-002061 EDP:

6 Pcs. Helical Brand New Made in USA 1/4" x 1" (LOC) x .020" (Radius) 4 FLT "ALTiN" Coated Solid Carbide Variable Pitch End Mills for Stainless Steel & Titanium Applications: Designed for roughing and finishing of steels and exotics. Variable pitch design for increasing depths of cut, up to 1 times the diameter.

1 Pc. Helical Brand New Made in USA 3/4" x 1-5/8" (LOC) x .030" (Radius) 4 FLT "ALTiN" Coated Solid Carbide Variable Pitch End Mill for Stainless Steel & Titanium Applications: Designed for roughing and finishing of steels and exotics. Variable pitch design for increasing depths of cut, up to 1 times the diameter.

1 Pc. Helical Brand New Made in USA 3/4" x 7/8" (LOC) x .030" (Radius) 4 FLT "ALTiN" Coated Solid Carbide Variable Pitch End Mill for Stainless Steel & Titanium Applications: Designed for roughing and finishing of steels and exotics. Variable pitch design for increasing depths of cut, up to 1 times the diameter.

3 Pcs.

1 Pc. Helical Brand New Made in USA 5/8" x 1-5/8" (LOC) x .030" (Radius) 4 FLT "ALTiN" Coated Solid Carbide Variable Pitch End Mill for Stainless Steel & Titanium Applications: Designed for roughing and finishing of steels and exotics. Variable pitch design for increasing depths of cut, up to 1 times the diameter.