flat head bolts for sale, brand-new and used.

This is a 100 pieces total lot of -50 Metric Hex Head Bolts size M6 =6 mm X 16 mm long- threads 1.0 pitch and 8.8 hardness grade . With 50 Nuts to match --Both have washers installed --bolts have 2 a flat and a split lock washer All silver zinc coated for weather resistance These all came from a Gas well rig building company that moved out of Dallas. They only used high quality hardware ,on those rigs.

10pcs New Grade 8 3/8-16x3" UNC Hex Head Cap Bolts / Screws 3/8-16 x 3 inches (More pictures at bottom of page) You're Bidding On

Here are 200 M8-1,25x40 hexagon head bolts. These are new, shipped in small flat rate box weighing about 8.8 lbs. wrench size is 13mm FREE SHIPPING

This listing is for 10 pcs. Zinc Plated 5mm Hex Sems Bolts Captive Washers M5 X .8 Metric Thread Dog Point Car Body Hardware Each bolt is 7/8" long (Bottom of Head to Tip). Comes with 10x Bolts, and 10x captive flat washers These bolts and nuts require an 8mm wrench or socket to tighten.

This listing is for 10 pcs. Zinc Plated 6mm (10mm Hex) Sems Bolts Captive Washers M6 X 1 Metric Thread Dog Point Car Body Hardware Each bolt is 1-3/16" long (Bottom of Head to Tip). Comes with 10x Bolts, 10x captive lock washers and 10x captive flat washers These bolts and nuts require a 10mm wrench or socket to tighten.

This listing is for 10 pcs. Zinc 6mm Hex Dog Point SEMS 5/8" Bolts & Fender Body M6 x 1.0 Metric Thread Each bolt is 5/8" long (Bottom of Head to Tip). Comes with 10x Bolts, 10x captive lock washers and 10x captive flat washers These bolts and nuts require a 10mm wrench or socket or Phillips heads screw driver to tighten.

You are buying the actual item shown in the photo and described below: These are Brand New Anchor Bolts. High Quality ITW Red Head Concrete Anchor Bolts 3/4" X 5-1/2", use 3/4" drill Pac

10 FLAT HEAD PHILLIPS COUNTERSUNK 6''concrete anchor bolts..PERFECT FOR YOUR HOLLOW METAL DOOR FRAME ANCHORING JOB

20 count - Toggler 3/16” – 20 Snaptoggle toggle bolts and FastenalFlat Head Phillips 10 – 24 X 3 bolts Holds up to 238 lbs.* in 1/2 inch drywall Holds up to 802 lbs.* in concrete *Holding values: Per anchor with 3/16”-24 bolts Holding Values with other bolts and materials available at toggler website Specifications per Toggler Specifications BL = T + W = 1/2 ” (12 mm).

Toggler Snaptoggle, 10 Pack, 1/4"-20", BB Hollow Wall Anchors, 1/2" Head Bolts, Replaces Old Fashioned Toggle Wings, Strongest & Require The Smallest Hole, Can Be Pre-Installed Without Using A Bolt & Won't Fall Behind The Wall When The Bolt Is Removed, Solid Metal Channel Centers The Bolt Which Cannot Sag, Will Not Damage Or Break Through The Wall Even Under Vibration.

TOGGLE BOLTS FLAT HEAD 3#

LISTED AUCTIONS: I am selling a large quantity of various anchors, fasteners, staples & construction hardware for below cost. There is a limited quantity on these items so get them while they're available. COMBINNED SHIPPING: If there is more than one item in listed auction there will usually be a discount on additional purchases if possible.

*************Buy 2 get 1 FREE************** Buy 2 cd titles through the auction or fixed price format listings and during the check-out process send a message to request a free CD title of your choice. ***************************************** Item Description This Ebay listing is for the sale of a CD ROM publication of a circa 1891 Architectural book: CD Title: Architectural Iron and Steel. About the

These are NEW reproduction Head Screw Bolts for Briggs & Stratton Engines. Fits Models FH, FI, FHI and other F Series engines. Set of 4 bolts 2 Thin Flat Head (Replaces Briggs Number 90917) and 2 Thick Rounded Head (Replaces Briggs Number 90790).

This listing is for 10 pcs. Black Painted T30 Torx Dog Point SEMS Bolt & Washer Fender Body M6 x 1.0 Metric Thread Car Body Hardware Each bolt is 7/8" long (Bottom of Head to Tip). Comes with 10x Bolts, and 10x captive flat washers These bolts and nuts require a T30 Torx wrench or socket to tighten.

Collection of Brass bolts, nuts and washers. Bolt size 1/4"x3" (8), 2"x1/4" (6), 1"x1/4" (6) Flat head screw sizes 1 1/2"x1/4" (2), 2"x1/4" (2) Brass nuts 7/16" (5), 3/8" (5) Please observe all photos carefully. Any questions feel free to ask.

You are buying the actual item shown in the photo and described below: These are Brand New Anchor Bolts. High Quality ITW Red Head Concrete Anchor Bolts WS-1226 1/2" X 2-3/4", use 1/2" drill Package of 25 bolts with wedges, washers, a

The Hillman Group 812548 Hot Dipped Galvanized Carriage Bolt, 5/16-Inch x 2-1/2-Inch, 100-Pack