flat head concrete anchors for sale, brand-new and used.

You are buying the actual item shown in the photo and described below: These are Brand New Anchor Bolts. High Quality ITW Red Head Concrete Anchor Bolts 3/4" X 5-1/2", use 3/4" drill Pac

You are buying the actual item shown in the photo and described below: These are Brand New Anchor Bolts. High Quality ITW Red Head Concrete Anchor Bolts WS-1226 1/2" X 2-3/4", use 1/2" drill Package of 25 bolts with wedges, washers, a

FOR SALE ARE 4 BOXES OF 370 TAPCON CONCRETE ANCHOR SCREWS.THE SCREWS ARE 3/16 X 2 3/4 LONG.YOU WILL RECEIVE ALL 4 BOXES AS SHOWN.IF YOU HAVE ANY QUESTIONS AT ALL PLEASE FEEL FREE TO CALL ME 1-614-580-0951. You will not be disappointed.My feedback speaks for itself.If you have any questions please email me and please check out the other items i have for sale.If you have problems with your order,PLEASE CONTACT ME BEFORE LEAVING FEEDBACK.Thanks,mark ATTENTION ATTENTION /NOTICE NOTICE!!!

This is a grab bag type listing of concrete anchors. They are mostly various styles of 3/8 size and 5/8 size anchors with a few 1/4 in redheads and a couple 3/4 in 7 in long anchors. There 38 3in long 5/8 dia.

IRWIN CONTRACTORS SPECIAL 3/16" x 6.5" LONG TAPCON DRILL BITS (50) PC Free Shipping via Priority Mail Made-in-Denmark

Powers Fasteners Inc 02850 New Old Stock partial box, This box contains 75 screws Powers Fastners 2850 1/4" x 3" Zamac Hammer-Screw Anchor Mushroom Head W/ #2 Phillips Type Screw Carbon Steel (75/Box) MPN: Powers Fasteners Inc 02850 Product Description: The Zamac Hammer-Screw is a unique, one-step nail drive anchor featuring a Phillips type head and a screw thread for use in concrete, block, brick or stone. It is in 1/4" diameter and length of 3".

You are bidding on 2 boxes (200 pieces) of POWERS FASTENERS 2748 3/16" X 3 1/4" PHILLIPS FLAT HEAD BLUE PERMA-SEAL TAPPER CONCRETE SCREWS. The TAPPER Anchoring System is a family of screw anchors, specially designed drill bits and installation tools designed to meet the needs of most light to medium duty applications in concrete, block and brick. We are a fifty year old distributor of nail and staple guns.

Toggler Snaptoggle, 10 Pack, 1/4"-20", BB Hollow Wall Anchors, 1/2" Head Bolts, Replaces Old Fashioned Toggle Wings, Strongest & Require The Smallest Hole, Can Be Pre-Installed Without Using A Bolt & Won't Fall Behind The Wall When The Bolt Is Removed, Solid Metal Channel Centers The Bolt Which Cannot Sag, Will Not Damage Or Break Through The Wall Even Under Vibration.

Fischer Concrete Screw Anchors - Carbon SteelSize: 3/8" x 4" The screws are listed on the box as 100mm long.The drill bit for the hole is 10mm.The head size on the bolt is 18mm.Model # FBS 10/15 S Box of 40These are new screws but not in the original box. I made the listing for 40 screws so that I could ship them in a USPS Small Flat Rate Box and offer free shipping. Each box will have a copy of the instructions on the original box.The pictures show that 50 screws are in t

You are looking at a lot of 42 5" sleeve anchors. They are 3/8" thick and the head is tapered 11/16" wide, and #3 Philips. I will be shipping these in a small flat rate priority box.

You are bidding on 2 boxes (200 pieces) of POWERS FASTENERS 2764 1/4" X 2 1/4" PHILLIPS FLAT HEAD BLUE PERMA-SEAL TAPPER CONCRETE SCREWS. The TAPPER Anchoring System is a family of screw anchors, specially designed drill bits and installation tools designed to meet the needs of most light duty applications in concrete, block and brick. We are a fifty year old distributor of nail and staple guns.

Thank You

45 Pieces of Stud bolt anchors. 3/8" X 2 1/2" long. Note: The hole size to be drilled into concrete is: 5/8" This box weighs 7 pounds, however we can ship it USPS flat rate for ony $ 6.95 Good Luck We only ship to the USA

Lot of Wej-it brand H5842 5/8-11 X 4-1/2" long zinc concrete or masonry wedge anchors. These are brand new anchors in their original box that came from a local hardware store that closed. You will receive a total of (8) anchors and matching nuts and washers are included.

Concrete Screws-Phillips Flat Head- Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items.

I HAVE A FEW BAGS OF 10 AVAILABLE IF YOU NEED MORE ! ! !

Up for auction is a box of Pro twist concrete screw anchors or tap cons .These are flat head 3/16" X 1-1/4". There are 100 pc boxes. They each come with masonary drill bit.