Fluke Networks CableIQ Service Kit. RJ45 tester and VDV Cable tester, US $1,400.00 – Picture 0

Fluke Networks CableIQ Service Kit. RJ45 tester and VDV Cable tester, US $1,400.00 – Picture 1

Fluke Networks Cableiq Service Kit. Rj45 Tester And Vdv Cable Tester

US $1,400.00

Hutchinson, Kansas, United States
Jan 30th

Open on mobile:
QR code

CableIQ Service Kit The CableIQ Service Kit provides the most powerful combination of cable and network test capabilities. With the breakthrough technologies built into CableIQ, LinkRunner, and IntelliTone, network trouble tickets can be closed faster than ever. First use LinkRunner to verify network connectivity and proper speed/duplex settings of connected devices (e. g. switch ports and PC NICs). Once the network devices have been verified, then use CableIQ to qualify the cabling link. If the cable does not qualify for the desired network speed (10/100/VoIP/Gig), CableIQ’s qualification test can be used to locate and troubleshoot performance faults (e. g. crosstalk or impedance faults). Before closing the trouble ticket, use CableIQ Reporter software to document completion of the job. CableIQ Tester View larger LinkRunner Network Multimeter View larger Reduce Escalated Problems by as Much as 30% with CableIQ CableIQ qualification tester's powerful troubleshooting capability and intuitive interface enable your frontline technicians to identify and troubleshoot a wider range of problems within your infrastructure. Is the port active? Are the duplex settings matched? Is it a network problem or a cable problem? Can the cable support the required network bandwidth? CableIQ network cable tester is the only tool that can answer all these questions before trouble tickets are escalated to the next level reducing problem escalation by up to 30%. Bandwidth Qualification When you deploy Voice over IP (VoIP) or Gigabit Ethernet, you want to make sure that the existing cabling will support the bandwidth requirements of your new equipment. Your cabling was certified, but moves adds and changes have rendered many links incapable of running desired speeds. CableIQ quickly reveals whether a link, including patch cords, is qualified for voice, 10/100BASE-T, VoIP, or Gig. Knowing your cabling's bandwidth capabilities before upgrading can prevent countless hours of future downtime and labor hours wasted on unnecessary troubleshooting. Cable Troubleshooting Plug into any cable, patch panel, or wall jack and see both the cable details (length/wiremap) and far-end device details (speed/duplex settings) at once. A series of both cable and network test functions help you isolate connectivity problems. For instance, if Discover mode shows duplex settings are matched but the problem persists, run Autotest to see if the cabling can support the required bandwidth. If a link is not qualified, CableIQ provides detailed information on the nature and location of cabling performance faults such as crosstalk or large impedance changes. With CableIQ your techs can close trouble tickets faster by cutting cable troubleshooting time in half. LinkRunner: An Essential Tool to Quickly Verify Network Connectivity and Availability LinkRunner improves troubleshooting and escalation accuracy by helping to quickly identify if a problem is in the network or the PC NIC. LinkRunner performs essential tests for troubleshooting and solving problems in the physical and link layers, the source of 80% of network problems. Link test – determine whether the drop is active, identify its speed, duplex capabilities, service type (e. g. , Ethernet, Token ring, Telco), and location on a switch (supports Cisco and Extreme Discovery Protocols). Users can then reconfigure these settings on the hub or NIC as needed. Now detects up to Gigabit Ethernet. Length test – determine whether the cable length is within specifications, what type it is (straight or crossover), and whether it has any faults. These tests, which work for both structured and patch cables, eliminate the need for a separate cable tester. Ping test – verify connectivity to key network resources and determine whether a PC NIC is responding.

Condition:	Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...	Brand	Fluke
Model	RJ45