PLEASE NOTE THAT MY GOAL AS A SELLER IS TO ALWAYS SATISFY YOU AS THE BUYER FIRST. STRIVING FOR POSITIVE FEEDBACK WITH 5 FIVE STAR RATINGS. IF EVER THERE IS A QUESTION OR CONCERN PLEASE CONTACT ME FIRST ALLOWING ME TO RESOLVE ANY CONCERNS.
(2) Flywheel Castings Un-machined. 10" Rough Diameter NO cast in Counterbalance Rim 1" wide ( As seen in Photo) 7-1/2" inside the rim Diameter 1-3/8" Hub Diameter 1-3/4" wide, equal stick out on each side. Spokes 1" wide and 1/2" thick.
You are bidding on an excellent running, rare 4hp Domestic sideshaft hit and miss engine with the factory water pump attachment. The engine is mechanically almost perfect, very strong holding compression and very minimal wear on all the moving parts. Only thing missing is the crankguard.
AIR COMPRESSOR REPLACEMENT PUMP PT03A EAGLE COMPRESSOR PUMP NEW Eagle bare PT03A Bare replacement compressor pump Single stage pump requires 5 horsepower ELECTRIC motor or 11 horsepower GASOLINE engine to deliver 18.5 CFM at 100 psi Fits Eagle compressors C5160V1, C5360V1 and C5560V1. Also replaces Ciasons S-302W Three cylinder single stage pump delivers a maximum of 18.5 cubic feet per minute at 100 psi, maximum pressure range for this pump is 135 PSI.
Ok folks, what we have here is a Lauson small engine flywheel that works with a Eiseman model 71R magneto. Serial number 47-1 from what I can read. A-23402 is another number I found.
Call with any questions - FACTORY DIRECT - 508-230-7118 Call with any Questions; 508.230.7118 We stock hundreds of pumps on all different sizes. These two stage bare units come complete with inlet filters and flywheel. These two stage bare units are efficient over 80-psi applications.
Call with any questions - FACTORY DIRECT - 508-230-7118 Call with any Questions; 508.230.7118 We stock hundreds of pumps on all different sizes. These two stage bare units come complete with inlet filters, head unloaders and flywheel. These two stage bare units are efficient over 80-psi applications.
Nice cleaned up original Maytag 92 multi motor Flywheel coupler part# S238 Painted with Dark Hunter Green Look at pictures they are part of description I also have the pulley listed for maytag 92 Thanks for looking Ask questions Check out my other listing
Tricks & Secrets of Old-Time Machinists: Hints and Kinks Provided by the Readers of American Machinist Magazine in 1915 and 1916, Volume 2, originally published in American Machinist Magazine, compiled, edited and published by Lindsay Publications, 2008. 5 1/2 x 8 1/2 paperback, 96 pages. ISBN 1-55918-371-3.
This is a rather hard to find original cast iron pulley for a Fairbanks Morse Z hit and miss or throttle governed gas engine. It is in good used condition with no cracks, breaks, or repairs of any kind. It does have some pitting and some extra holes in the face of it but this won't affect it's performance.
This is a real nice original cast iron pulley for an International Harvester Famous, Titan, or Mogul hit and miss or throttle governed gas engine. It is in excellent condition with no cracks, breaks, or repairs of any kind except for two cracks in the spokes right by the hub. I don't think this would hurt anything to use it like this or it would be a great candidate for stitching.
This is a rather hard to find original cast iron pulley for a Fuller and Johnson hit and miss or throttle governed gas engine. It is in good used condition with no cracks, breaks, or repairs of any kind. It measures 8 inches in diameter with a 4 1/2 inch face.
This is a real nice original cast iron pulley for an International Harvester Famous or Titan hit and miss or throttle governed gas engine. It is in excellent condition with no cracks, breaks, or repairs of any kind. It is part number G1032 and measures 9 inches in diameter with a 6 inch face.
This is a rather hard to find original cast iron pulley for a hit and miss or throttle governed gas engine. It is in good used condition with no cracks, breaks, or repairs of any kind. It measures 8 inches in diameter with a 4 1/2 inch face.
This auction is for one new old stock Auto Grace 6 hp., single cylinder, water cooled, Lister type diesel engine and accessories. I imported theengine from India in 2001 and it has been in storage. The engine has been uncrated but never started since I've owned it new.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.