Fuzion 24oz Black Gun Spray Foam RV Waterfall Pond (Case of 12), US $109.99 – Picture 0

Fuzion 24oz Black Gun Spray Foam RV Waterfall Pond (Case of 12), US $109.99 – Picture 1

Fuzion 24oz Black Gun Spray Foam Rv Waterfall Pond (case Of 12)

US $109.99

Fort Wayne, Indiana, United States
Jan 30th

Open on mobile:
QR code

Fuzion Gun Foam Sealant is a one-component insulating poly- urethane foam (OCF) sealant specifically designed for use in small gaps, cracks, voids, and crevices. Using Fuzion Sealants to seal gaps and penetrations in the building envelope stops unwanted air infiltration. Less air infiltration into the building envelope improves comfort and results in less energy consumption. Fuzion Gun Foam Seal- ants utilize a (HC) propellant. Refer to the product storage and special handling section of this document for information regarding the use of flammable aerosol propellants. The product is for professional use only. Fuzion Gun Foam Sealant is available in a 24oz size and is designed to be dispensed through a FOMO foam gun dispensor Application Areas Apply Fuzion Gun Foam Sealant onto any clean surface to fill and seal around gaps, beneath base plates, mud sills, corner joints, T-joints, exterior cracks, around utility panels, pipes, duct penetrations, etc. Properties The pre-pressurized portable OCF system, applied in a bead form, expands and cures slowly to a semi-rigid, closed cell foam upon reaction with moisture, such as ambient humidity. Fuzion Gun Foam Sealant dries tack-free in approximately 5 minutes or less depending on moisture and temperature conditions. The foam fully cures within 24 hours. Expansion of 2-3 times the dispensed bead within the first hour should be expected. It is recommended to fill the cavity only 1/3 of the way full to allow for expansion. Fuzion Gun Foam Sealant will adhere to itself if more foam need be applied. Fuzion Gun Foam Sealant adheres to almost all building materials with the exception of surfaces such as polyethylene, Teflon®, silicone, oils, greases, mold release agents, and similar materials. Optimum chemical temperature is between 65-80°F (18-27°C), but may be applied in cold or hot ambient conditions, as long as the optimal chemical temperature range is maintained. Cured foam is dimensionally stable, and known to be resistant to temperatures ranging between -200°F to +240°F (-129°C to + 115°C). Fuzion Gun Foam Sealant is water resistant and will not harm electrical wire insulations, Romex, rubber, PVC, polyethylene or other plastic (i.e. PEX, CPVC). It is approved for use around wires, plumbing penetrations, etc. When cured, polyurethane foam is permanent, chemically inert, non-reactive and stable for an indefinite period of time. Cured foam should be protected against UV rays (i.e. sunlight) by paint- ing or staining to prevent long term discoloration or degradation.