gage 8 for sale, brand-new and used.

Made by Gage Bilt Products This is a Heavy Duty Pneudraulic Rivet Installation Tool in good condition. Note that the nose piece of this unit appears to be cracked as

You are purchasing the pictured set of thread ring gage. This item is USED, but in very good condition. It is labeled: 5/8 - 28 UN-2A GO PD .6018NS - 2A

NI 9236 29.4 mV/V, Quarter-Bridge Strain Gage, 10 kS/s/ch, 8 Ch Mod New, unused item, only module

Precision Gage & Tool Company Wet film applicator 2" wide 5-50 mils (WFT) Eight Sided tool Portable,Easy to use.

Used SuperLogics strain gauge modules. Quantity of 3 , everything pictured is included, one terminal block is missing. From a working environment, but unable to test.

DoALL MICRO-STEP GAGING SYSTEM Description: This listing is for a factory boxed DoALL MICRO-STEP gaging system that holds gage blocks and is rated for 2" to 18" with seven different adjustment bars. We feel confident that the people looking at this listing will know much more about this vintage gaging system than we do. This is in the original box and it was manufactured in the U.S.A.

Thank You For Looking At Our Products Product Information:Suburban Tool Permanent Magnetic Compound Sine PlateSeries S1 w/ Sine Plate Product Features & Specifications:Permanent Magnetic Sine Plate

STARRETT 257B PRECISION SURFACE GAGE.  STARRETT 257B SURFACE GAGE WITH HARDENED STEEL BASE IN EXCELLENT USED CONDITION WITH BOTH RODS INCLUDING  A  9" AND A 12" X 5/16 DIAMETER. BASE MEASUREMENTS  2-3/8" (2.353" WIDE)  X 1-1/8"(1.122") TALL X 2-13/16"(2.8158") LONG WITH 1 VEE ON BOTTOM TO BE USED ON ROUND SURFACES OR AS NEEDED.  GAGE ALSO HAS THE (4)   3/16"  PINS IN BASE.  ONE SIDE OF THE BASE OPPOSITE THE ROD WAS PRECISELY GROUND FOR CHECKING SQUARENESS OF WORK BLOCK'S.

This sale is for one MINT ZEISS MICROPTIC CLINOMETER INCLINOMETER ANGLE GAGE mint condition Zeiss Microptic Clinometer Inclinometer Angle Gage , precision angle measurement is measured through microscope eye pice and adjusted using th eknob on the right hand side made in Germany comes in a wooden box some chipping on the box due to handling and age of box A rule may appear in the photographs for size reference only and is not part of this sale.

STARRETT 257 C SURFACE GAGE WITH HARDENED STEEL BASE IN EXCELLENT USED CONDITION COMPLETE INCLUDES A 9" X 3/8" DIAMETER STARRETT ROD. BASE MEASUREMENTS, 3 3/16" WIDE  X 1-1/8" TALL X 3-1/2 LONG WITH 1 VEE ON BOTTOM TO BE USED ON ROUND SURFACES OR AS NEEDED.  GAGE ALSO HAS  (4)   3/16"  PINS IN BASE.  ONE SIDE OF BASE OPPOSITE THE ROD WAS PRECISELY GROUND FOR CHECKING SQUARENESS OF WORK BLOCK'S.

We are Selling a Brand New Gage Bilt Cherry Max Power Riveter P/N: GBP744. This product is rebuilt and in great working condition. Specifications -Designed specifically for the efficient installation of 1/8” thru 1/4” Cherrymax® and High-Clinch rivets, as well as a wide range of blind riv

Nice Vintage Wooden Box Precision Long Gage Blocks by HOKE / Pratt & Whitney Set # 458-M 8 pc steel set 5" / 6" / 7" / 8" /10" /12"/ 16" / 20" Please see all pictures, there are spaces for 4 rods and some screw holes, that are missing things. Some of the green caps are brittle and a couple are missing. This was purchased from an estate sale, where the gentleman had each steel rod individually wrapped and taped to protect it.

Mitutoyo 571-262-10 Absolute Digimatic Depth Gage; 0-8"/ 200mm Rating IP67 Electronic Digital Depth Gage (NO HOOK)SPC Output: YES

Made by Baldor Electric Co. This is a Baldor 6" Carbide Tool Grinder Miter Gage. Model #: HA1029A01 SPECIFICATIONS: Miter Angle: 45 - 0 - 45 degrees Slot Bar Size: 1/2" wide x 1/8" high Fence Size: 3" wide x 1" high Overall Dimensions: 3" x 4'' x 1-1/8'' high Comes exactly as shown in pictures.

Gardner Laboratories, Inc. Interchemical Thickness Gage Model R 0-4 Mils Version Inmont Wet Film Thickness Gauge for Critical Testing of Coatings with Rotating Scale, Holder and Soft Plastic Form-Fitting Case Holder Measures 6 1/4 " Long x 1 3/4 " Wide x 1" High; Gage Weighs 8 oz; Holder, 6 oz; Case, 4 oz; Total Shipped Weight Is 1 lb 8 oz Manufactured by Gardner Laboratories, Inc. of Bethesda, Maryland, USA (now part of the BYK Division of ALTANA Group of Germany) Actual Item For Sale Is Shown

SharkBite Model # 23100 Multi-Head Crimp Tool Kit - Adjustable Procedure for: 1" Pex tool with 3/8", 3/4" w/Gage interchangeable die sets. 1/2" missing

Daniels M22520 Crimp Tool Kit AF8 Crimping Tool TH254 TH1A Turret G125 Inspection Gage M22520/1-01: Crimping Tool M22520/1-02: Turret Head Assemblies M22520/3-1:Inspection Gage This is an used item the box of kit has few scratches and sticker marks but it is fully functional. Please see photos.