hammer nut for sale, brand-new and used.

Keen Kutter is easily read on the wrench. The other stampings have been worn away. The shaft Is stamped "Solid Bar".

I HAVE A LINEMANS OR TOWERMANS MULTI PURPOSE WRENCH FOR SALE. FITS NUMERIOUS NUT SIZES AND ALSO HAS A HAMMER HEAD.

4mm Label Semi-Automatic Sheet Embosser Metal Stamping Printer Marking Machine Description:

l DESCRIPTION Husky 1/2 IN Impact Wrench 800 FT-LBS with 11 Piece Impact Metric Socket Set on Rail - Missing 18 mm Socket

K&D 2079 Heavy Duty Hydraulic Valve Tappet Remover

FOR SALE IS A USED MILITARY SURPLUS TOOL SET. THE KIT CONTAINS OVER 64 PIECES INCLUDING SCREWDRIVERS, WRENCHES, WIRE CUTTERS, FEELER GAGES, ALLEN WRENCHES, A HAMMER AND MORE! THERE IS MINOR RUST ON SOME OF THE METAL ITEMS BUT WILL NOT IMPEDE USE.

MKT® Double Expansion Concrete Anchors , 25pcs. 7/8" x 2 1/2" Use with 7/8"dia. Drill, and 1/2" -13 thread per inch machine screws or bolts (bolts not included) Approvals/Listings• G.S.A.

YOU WILL RECIEVE ONE ANCHOR The Wej-It PD58 POWER-Drop internally threaded drop-in anchor includes a wedge mechanism to create a secure hold within solid masonry and solid uncracked concrete, and meets 2000 International Building Code and 2000 International Residential Code specifications. The anchor body and wedge clip are made of corrosion-resistant zinc-plated on steel. The wedge clip expands within the drilled hole to secure the anchor in place.

Cutler Hammer SPST Toggle Switch AN-3021-2B. This switch has screw terminals. It mounts through a 0.5 inch hole.

Cutler Hammer DPDT Toggle Switch 7422. This switch has screw terminals. It mounts through a 0.5 inch hole.

Cutler Hammer DPST Toggle Switch 125 VAC 15 Amp. This switch has spade terminals. It mounts through a 0.5 inch hole.

Cutler Hammer Center Off Momentary SPDT Toggle Switch. This switch has pigtail terminals. It mounts through a 0.5 inch hole.

Cutler Hammer SPST Toggle Switch 8803K4. This switch has solderable terminals. It mounts through a 0.5 inch hole.

Cutler Hammer SPDT Toggle Switch 125 VAC 12 Amp. This switch has screw terminals. It mounts through a 0.5 inch hole.

Cutler Hammer Center Off SPDT Toggle Switch 125 VAC 15 Amp. This switch has solderable terminals. It mounts through a 0.5 inch hole.

Cutler Hammer DPST Toggle Switch 125 VAC 15 Amp. This switch has screw terminals. It mounts through a 0.5 inch hole.

Cutler Hammer SPST Toggle Switch 125 VAC 15 Amp. This switch has screw terminals. It mounts through a 0.5 inch hole.

USED GEARENCH 1-1/16" HAMMER WRENCH FOR 5/8" STUDS / 1-1/16" NUTS. EMAIL WITH ANY QUESTIONS. YOU PROBABLY WON'T RECEIVE THE ONE IN THE PICTURE, BUT WILL RECEIVE ONE SIMILAR (SAME BRAND.) THANKS FOR LOOKING!