+ Post new Ad
Heavy Duty 100 mm / 4" Firm Joint Outside OD Calipers Hardened Steel Arms, US $460 – Picture 0
Heavy Duty 100 mm / 4" Firm Joint Outside OD Calipers Hardened Steel Arms, US $460 – Picture 0

Heavy Duty 100 Mm / 4" Firm Joint Outside Od Calipers Hardened Steel Arms

US $460

  • DELHI, DELHI, India
  • Nov 18th
Open on mobile:
QR code
Heavy Duty 100 mm / 4" Firm Joint Outside OD Calipers Hardened Steel Arms SIZE:4” 100MM Outside Firm Joint Caliper. When caliper is used to measure the outside diameter of a cylinder, then it must be held in hand with its nut between fore-finger and thumb, and one end of leg touching with the surface of cylinder. The other leg is moved to and fro on the opposite surface so that other leg just passes through the cylinder. The caliper reading is transferred to the scale by holding one leg of the caliper against the scale firmly and the reading taken at the other end of leg. For accurate settings, the distance between the outside calipers may be set by slip gauge or by micrometer anvils. Sometimes it may be required to transfer this dimension to caliper.

Directions

Similar products from Other Workholding Tools

4pc FAIRLANE SQUARE POSITIONING GRIPPER 3/4" WIDE LONG 1/2" TALL .280" HOLE

4pc FAIRLANE SQUARE POSITIONING GRIPPER 3/4" WIDE LONG 1/2" TALL .280" HOLE

  • Jeddo, Michigan, United States
  • Nov 19th
5pc FAIRLANE Angle Grippers 9/16" Wide .348" Tall .65" Long #10-32 Hole

5pc FAIRLANE Angle Grippers 9/16" Wide .348" Tall .65" Long #10-32 Hole

  • Jeddo, Michigan, United States
  • Nov 19th
6pc FAIRLANE POSITIONING GRIPPER PAD 1" Diameter 1/2" .5" Tall .282" 9/32" Hole

6pc FAIRLANE POSITIONING GRIPPER PAD 1" Diameter 1/2" .5" Tall .282" 9/32" Hole

  • Jeddo, Michigan, United States
  • Nov 19th
Mathey MSA 4 Inch Pipe Beveler

Mathey MSA 4 Inch Pipe Beveler

  • Broussard, Louisiana, United States
  • Nov 19th
7pc FAIRLANE ADJUSTABLE POSITIONING GRIPPER PAD 3/4" Diameter 1.5" Tall 3/4"-10

7pc FAIRLANE ADJUSTABLE POSITIONING GRIPPER PAD 3/4" Diameter 1.5" Tall 3/4"-10

  • Jeddo, Michigan, United States
  • Nov 18th
7pc FAIRLANE ADJUSTABLE POSITIONING GRIPPER PAD 7/8 Diameter 1/2 .5 Tall 3/4"-16

7pc FAIRLANE ADJUSTABLE POSITIONING GRIPPER PAD 7/8 Diameter 1/2 .5 Tall 3/4"-16

  • Jeddo, Michigan, United States
  • Nov 18th
Machinist Serrated Key Gripper 3/4 x 1/2" x 1/2" x 3/8" x 5/32 hole WORK-HOLDING

Machinist Serrated Key Gripper 3/4 x 1/2" x 1/2" x 3/8" x 5/32 hole WORK-HOLDING

  • Jeddo, Michigan, United States
  • Nov 18th
CHICK WORK HOLDING FOUNDATION TABLE 1016 x 482MM, 40" x 19" FREE SHIPPING

CHICK WORK HOLDING FOUNDATION TABLE 1016 x 482MM, 40" x 19" FREE SHIPPING

  • Broomfield, Colorado, United States
  • Nov 18th
1PC Machinist Hold Down Clamp Strap .548" Slot 7/8" Bottom Width 1/2"-13 Holes

1PC Machinist Hold Down Clamp Strap .548" Slot 7/8" Bottom Width 1/2"-13 Holes

  • Jeddo, Michigan, United States
  • Nov 18th
2pc FAIRLANE Carbide Angle Grippers 9/16" Wide 3/8" Tall .65" Long #10-32 Hole

2pc FAIRLANE Carbide Angle Grippers 9/16" Wide 3/8" Tall .65" Long #10-32 Hole

  • Jeddo, Michigan, United States
  • Nov 18th
PHASE II 5C (225-205) COLLET INDEXER, HORIZONTAL/VERTICAL

PHASE II 5C (225-205) COLLET INDEXER, HORIZONTAL/VERTICAL

  • Toms River, New Jersey, United States
  • Nov 18th
STARRETT No. 289A: ATTACHMENT OFR COMBINATION SQUARES-RULES, VG. COND.

STARRETT No. 289A: ATTACHMENT OFR COMBINATION SQUARES-RULES, VG. COND.

  • Egg Harbor Township, New Jersey, United States
  • Nov 18th
2pc Machinist Hold Down Clamps Straps .540" Slot 7/8" Bottom Width 1/2"-13 Holes

2pc Machinist Hold Down Clamps Straps .540" Slot 7/8" Bottom Width 1/2"-13 Holes

  • Jeddo, Michigan, United States
  • Nov 17th
3pc FAIRLANE MACHINIST PIVOTING GRIPPER PAD 1" Diameter 1" Tall 5/8"-11 Thread

3pc FAIRLANE MACHINIST PIVOTING GRIPPER PAD 1" Diameter 1" Tall 5/8"-11 Thread

  • Jeddo, Michigan, United States
  • Nov 17th
3pc FAIRLANE ROUND PIVOTING GRIPPER PAD 11/16" Diameter 3/4" Tall 7/16-14 Thread

3pc FAIRLANE ROUND PIVOTING GRIPPER PAD 11/16" Diameter 3/4" Tall 7/16-14 Thread

  • Jeddo, Michigan, United States
  • Nov 17th
Machinist Material Jack

Machinist Material Jack

  • Paris, Ohio, United States
  • Nov 17th
MACHINIST TOOLS LATHE MILL Machinist Ford Motor Co Pliers Plyers Model A T

MACHINIST TOOLS LATHE MILL Machinist Ford Motor Co Pliers Plyers Model A T

  • Morris Plains, New Jersey, United States
  • Nov 17th
lathe, grinder dogs

lathe, grinder dogs

  • Gloucester Point, Virginia, United States
  • Nov 17th
NOGA MAGNETIC HOLDER WITH LINE AND SHUTOFF VALVE

NOGA MAGNETIC HOLDER WITH LINE AND SHUTOFF VALVE

  • Mesa, Arizona, United States
  • Nov 17th
1/2Inch Thread, Split T Slot Nut

1/2Inch Thread, Split T Slot Nut

  • Auburndale, Florida, United States
  • Nov 17th

People who viewed this item also vieved

Taft Peirce Solid Body Cast Iron V-Block (Inv.28361)

Taft Peirce Solid Body Cast Iron V-Block (Inv.28361)

  • Portland, Connecticut, United States
  • Jan 30th
Brown & Sharpe Magnetic Block

Brown & Sharpe Magnetic Block

  • Elkhart, Indiana, United States
  • Jan 30th
7-1/2" x 37" x 10" SET-UP-BLOCK - #26785

7-1/2" x 37" x 10" SET-UP-BLOCK - #26785

  • Cincinnati, Ohio, United States
  • Jan 30th
Perfection Free Live Center - Mech . Dev. Corp Model 4-5-M

Perfection Free Live Center - Mech . Dev. Corp Model 4-5-M

  • Schenectady, New York, United States
  • Jan 30th
ROTOR Super C7 Super Heavy Duty Live Center #7MT Morse Taper

ROTOR Super C7 Super Heavy Duty Live Center #7MT Morse Taper

  • Springfield, Illinois, United States
  • Jan 30th
Riten Live Center 9" Taper

Riten Live Center 9" Taper

  • Portland, Oregon, United States
  • Jan 30th
NEW 12" Howa Kitagawa MMK CNC Lathe Machine Chuck 12 inch Adapter Plate

NEW 12" Howa Kitagawa MMK CNC Lathe Machine Chuck 12 inch Adapter Plate

  • Franklin, Wisconsin, United States
  • Jan 30th
BUCK 12" 6-JAW SET-TRU LATHE CHUCK D1-8 MOUNT

BUCK 12" 6-JAW SET-TRU LATHE CHUCK D1-8 MOUNT

  • Wadley, Alabama, United States
  • Jan 30th
KITAGAWA N-08 3 JAW 8" CNC CHUCK

KITAGAWA N-08 3 JAW 8" CNC CHUCK

  • Cedarburg, Wisconsin, United States
  • Jan 30th
DE-STA-CO 895-L-2.0-R2000-C2000 Pneumatic Clamp, With Arm, No Sensor, Used

DE-STA-CO 895-L-2.0-R2000-C2000 Pneumatic Clamp, With Arm, No Sensor, Used

  • Warren, Michigan, United States
  • Jan 30th
DE-STA-CO 895SE-AA-251-R1000-C100K Pneumatic Clamp, With Arm, No Sensor, Used

DE-STA-CO 895SE-AA-251-R1000-C100K Pneumatic Clamp, With Arm, No Sensor, Used

  • Warren, Michigan, United States
  • Jan 30th
DE-STA-CO A895B-20-72-R1000-C100K Pneumatic Clamp, With Arm, No Sensor, Used

DE-STA-CO A895B-20-72-R1000-C100K Pneumatic Clamp, With Arm, No Sensor, Used

  • Warren, Michigan, United States
  • Jan 30th
BRINEY BR32-14 UP COLLET 15-14 New (Lot of 3)

BRINEY BR32-14 UP COLLET 15-14 New (Lot of 3)

  • Wilmington, Ohio, United States
  • Jan 30th
RARE Schaublin 102 E25 Collet Chuck #161-420 + 1 Collet dia 10mm

RARE Schaublin 102 E25 Collet Chuck #161-420 + 1 Collet dia 10mm

  • Ukraine, Ukraine
  • Jan 30th
Hertel HCV40ER32256 Collet Chuck Series ER-32 CAT40

Hertel HCV40ER32256 Collet Chuck Series ER-32 CAT40

  • Vista, California, United States
  • Jan 30th
CINCINNATI SERIES C TOOL MASTER MONOSET COLLET #7 BROWN & SHARPE TAPER LOT C1861

CINCINNATI SERIES C TOOL MASTER MONOSET COLLET #7 BROWN & SHARPE TAPER LOT C1861

  • Dayton, Ohio, United States
  • Jan 30th
CINCINNATI SERIES C TOOL MASTER MONOSET COLLET #5 BROWN & SHARPE TAPER LOT C1857

CINCINNATI SERIES C TOOL MASTER MONOSET COLLET #5 BROWN & SHARPE TAPER LOT C1857

  • Dayton, Ohio, United States
  • Jan 30th
CINCINNATI SERIES C TOOL MASTER MONOSET COLLET #5 BROWN & SHARPE TAPER LOT C1816

CINCINNATI SERIES C TOOL MASTER MONOSET COLLET #5 BROWN & SHARPE TAPER LOT C1816

  • Dayton, Ohio, United States
  • Jan 30th
LATHE FACE PLATE 16" with D1-6 MOUNT

LATHE FACE PLATE 16" with D1-6 MOUNT

  • Baltimore, Maryland, United States
  • Jan 30th
Cleveland Precision Systems Two Axis Positioner Traverser

Cleveland Precision Systems Two Axis Positioner Traverser

  • Wyoming, Michigan, United States
  • Jan 30th
MACHINIST LATHE Large CLEAN Face Plate for South Bend ? Lathe 8 1/2" 1 1/2" Bore

MACHINIST LATHE Large CLEAN Face Plate for South Bend ? Lathe 8 1/2" 1 1/2" Bore

  • Morris Plains, New Jersey, United States
  • Jan 30th
EXCELLENT MOORE USA Right Angle VERTICAL BRACKET for 10" MOORE ROTARY TABLE

EXCELLENT MOORE USA Right Angle VERTICAL BRACKET for 10" MOORE ROTARY TABLE

  • Perth, Ontario, Canada
  • Jan 30th
FIBRO INC. FIBROTOR CAM ROTARY TABLE EM 01.0160.1.132.08.0.0.0

FIBRO INC. FIBROTOR CAM ROTARY TABLE EM 01.0160.1.132.08.0.0.0

  • Sunman, Indiana, United States
  • Jan 30th
12" News Horizontal Rotary Indexing Table in good condition. Rotates smoothly.

12" News Horizontal Rotary Indexing Table in good condition. Rotates smoothly.

  • DeKalb, Illinois, United States
  • Jan 30th
Shop Fox D2933 Angle Vise New

Shop Fox D2933 Angle Vise New

  • United States
  • Jan 30th
3" SWIVEL HEAVY DUTY BASE BENCH VISE (without jaws) IN GOOD WORKING CONDITION

3" SWIVEL HEAVY DUTY BASE BENCH VISE (without jaws) IN GOOD WORKING CONDITION

  • La Mesa, California, United States
  • Jan 30th
wilton swivel 3 1/2 inch bullet vise

wilton swivel 3 1/2 inch bullet vise

  • Flanders, New Jersey, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies