+ Post new Ad
lathe, grinder dogs, US $430 – Picture 0
lathe, grinder dogs, US $430 – Picture 0

Lathe, Grinder Dogs

US $430

  • Gloucester Point, Virginia, United States
  • Nov 17th
Open on mobile:
QR code
These work holding dogs are old I do not know what brand they are one of the screws is a hex cap screw and not a square lug one has some grinder marks on it one is been a little and one has the tabs broken there are two of the larger ones the same size there are two of the medium was the same size and two different smaller ones being sold as is no returns these items are Rusty dirty and have various scratches dings xcetera

Directions

Similar products from Other Workholding Tools

1PC Machinist Hold Down Clamp Strap .548" Slot 7/8" Bottom Width 1/2"-13 Holes

1PC Machinist Hold Down Clamp Strap .548" Slot 7/8" Bottom Width 1/2"-13 Holes

  • Jeddo, Michigan, United States
  • Nov 18th
2pc FAIRLANE Carbide Angle Grippers 9/16" Wide 3/8" Tall .65" Long #10-32 Hole

2pc FAIRLANE Carbide Angle Grippers 9/16" Wide 3/8" Tall .65" Long #10-32 Hole

  • Jeddo, Michigan, United States
  • Nov 18th
Heavy Duty 100 mm / 4" Firm Joint Outside OD Calipers Hardened Steel Arms

Heavy Duty 100 mm / 4" Firm Joint Outside OD Calipers Hardened Steel Arms

  • DELHI, DELHI, India
  • Nov 18th
PHASE II 5C (225-205) COLLET INDEXER, HORIZONTAL/VERTICAL

PHASE II 5C (225-205) COLLET INDEXER, HORIZONTAL/VERTICAL

  • Toms River, New Jersey, United States
  • Nov 18th
STARRETT No. 289A: ATTACHMENT OFR COMBINATION SQUARES-RULES, VG. COND.

STARRETT No. 289A: ATTACHMENT OFR COMBINATION SQUARES-RULES, VG. COND.

  • Egg Harbor Township, New Jersey, United States
  • Nov 18th
2pc Machinist Hold Down Clamps Straps .540" Slot 7/8" Bottom Width 1/2"-13 Holes

2pc Machinist Hold Down Clamps Straps .540" Slot 7/8" Bottom Width 1/2"-13 Holes

  • Jeddo, Michigan, United States
  • Nov 17th
3pc FAIRLANE MACHINIST PIVOTING GRIPPER PAD 1" Diameter 1" Tall 5/8"-11 Thread

3pc FAIRLANE MACHINIST PIVOTING GRIPPER PAD 1" Diameter 1" Tall 5/8"-11 Thread

  • Jeddo, Michigan, United States
  • Nov 17th
3pc FAIRLANE ROUND PIVOTING GRIPPER PAD 11/16" Diameter 3/4" Tall 7/16-14 Thread

3pc FAIRLANE ROUND PIVOTING GRIPPER PAD 11/16" Diameter 3/4" Tall 7/16-14 Thread

  • Jeddo, Michigan, United States
  • Nov 17th
Machinist Material Jack

Machinist Material Jack

  • Paris, Ohio, United States
  • Nov 17th
MACHINIST TOOLS LATHE MILL Machinist Ford Motor Co Pliers Plyers Model A T

MACHINIST TOOLS LATHE MILL Machinist Ford Motor Co Pliers Plyers Model A T

  • Morris Plains, New Jersey, United States
  • Nov 17th
NOGA MAGNETIC HOLDER WITH LINE AND SHUTOFF VALVE

NOGA MAGNETIC HOLDER WITH LINE AND SHUTOFF VALVE

  • Mesa, Arizona, United States
  • Nov 17th
1/2Inch Thread, Split T Slot Nut

1/2Inch Thread, Split T Slot Nut

  • Auburndale, Florida, United States
  • Nov 17th
4pc FAIRLANE ROUND POSITIONING GRIPPER 1/2" DIAMETER 1/2" TALL #10-32 THREADS

4pc FAIRLANE ROUND POSITIONING GRIPPER 1/2" DIAMETER 1/2" TALL #10-32 THREADS

  • Jeddo, Michigan, United States
  • Nov 16th
5pc FAIRLANE Straight Angle Grippers 9/16" Wide 3/8" Tall .65" Long #10-32 Hole

5pc FAIRLANE Straight Angle Grippers 9/16" Wide 3/8" Tall .65" Long #10-32 Hole

  • Jeddo, Michigan, United States
  • Nov 16th
6pc FAIRLANE ROUND POSITIONING GRIPPER 1" DIAMETER 3/8" TALL 1/4"-32 THREADS

6pc FAIRLANE ROUND POSITIONING GRIPPER 1" DIAMETER 3/8" TALL 1/4"-32 THREADS

  • Jeddo, Michigan, United States
  • Nov 16th
7pc FAIRLANE ROUND CARBIDE TIPPED GRIPPER 1/2" DIA 1/2" TALL #10-32 THRD 4-Point

7pc FAIRLANE ROUND CARBIDE TIPPED GRIPPER 1/2" DIA 1/2" TALL #10-32 THRD 4-Point

  • Jeddo, Michigan, United States
  • Nov 16th
++ KURT MILLING VICE HANDLE 10" LONG 1" INNER DIAMETER (AA)

++ KURT MILLING VICE HANDLE 10" LONG 1" INNER DIAMETER (AA)

  • Bosque Farms, New Mexico, United States
  • Nov 16th
++ KURT MILLING VICE HANDLE 11.5" LONG 3/4" INNER DIAMETER 080-23A (BB)

++ KURT MILLING VICE HANDLE 11.5" LONG 3/4" INNER DIAMETER 080-23A (BB)

  • Bosque Farms, New Mexico, United States
  • Nov 16th
JERGENS #43904 Thumb Screw 1/4-20 x 1-1/2" Made in USA

JERGENS #43904 Thumb Screw 1/4-20 x 1-1/2" Made in USA

  • Crystal Lake, Illinois, United States
  • Nov 16th
7pc FAIRLANE ROUND CARBIDE TIPPED GRIPPER 1/2" DIA 3/8" TALL #10-32 THRD FINE

7pc FAIRLANE ROUND CARBIDE TIPPED GRIPPER 1/2" DIA 3/8" TALL #10-32 THRD FINE

  • Jeddo, Michigan, United States
  • Nov 15th

People who viewed this item also vieved

Jordan Tool- L-Blocks ALB051M Full Metric Hold Blocks

Jordan Tool- L-Blocks ALB051M Full Metric Hold Blocks

  • Waterford, Michigan, United States
  • Jan 30th
1-Press plate NC3383-34

1-Press plate NC3383-34

  • New Paris, Indiana, United States
  • Jan 30th
TTC #PAB-92 0-60 DEGREE PRECISION ANGLE BLOCK

TTC #PAB-92 0-60 DEGREE PRECISION ANGLE BLOCK

  • Flushing, New York, United States
  • Jan 30th
Silver Tone Black Alloy MT2 Morse TaPer Lathes Dead Center SS

Silver Tone Black Alloy MT2 Morse TaPer Lathes Dead Center SS

  • Shenzhen, China
  • Jan 30th
#4 MORSE TAPER LIGHT DUTY LIVE CENTER

#4 MORSE TAPER LIGHT DUTY LIVE CENTER

  • Cadiz, Kentucky, United States
  • Jan 30th
MT3 Dead Center

MT3 Dead Center

  • Chino, California, United States
  • Jan 30th
10" Hard Chuck Jaws Huron KT10RJ2S

10" Hard Chuck Jaws Huron KT10RJ2S

  • Unionville, Connecticut, United States
  • Jan 30th
6 5/8" chuck adapter plate cam-lock 3/4" locking pins

6 5/8" chuck adapter plate cam-lock 3/4" locking pins

  • Camano Island, Washington, United States
  • Jan 30th
7 7/8" chuck adapter plate cam-lock 3/4" locking pins

7 7/8" chuck adapter plate cam-lock 3/4" locking pins

  • Camano Island, Washington, United States
  • Jan 30th
DE-STA-CO A895B-13R-22-R1000-C100K Pneumatic Clamp, With Arm, No Sensor, Used

DE-STA-CO A895B-13R-22-R1000-C100K Pneumatic Clamp, With Arm, No Sensor, Used

  • Warren, Michigan, United States
  • Jan 30th
UP TO 14 NEW STAINLESS STEEL CLAMPS

UP TO 14 NEW STAINLESS STEEL CLAMPS

  • Rochester, New York, United States
  • Jan 30th
UP TO 3 DE-STA-CO HORIZONTAL FIXTURE 450lb CLAMPS MODEL 207-L

UP TO 3 DE-STA-CO HORIZONTAL FIXTURE 450lb CLAMPS MODEL 207-L

  • Rochester, New York, United States
  • Jan 30th
ERICKSON COLLET CHUCK

ERICKSON COLLET CHUCK

  • Odessa, Florida, United States
  • Jan 30th
PARLEC SPRING COLLET CHUCK

PARLEC SPRING COLLET CHUCK

  • Odessa, Florida, United States
  • Jan 30th
ETM Spring Collet Chucks

ETM Spring Collet Chucks

  • Odessa, Florida, United States
  • Jan 30th
(4) PIECE SET CINCINNATI MONOSET SERIES A COLLETS SIZES LISTED LOT C5038

(4) PIECE SET CINCINNATI MONOSET SERIES A COLLETS SIZES LISTED LOT C5038

  • Dayton, Ohio, United States
  • Jan 30th
(4) PIECE SET CINCINNATI MONOSET SERIES A COLLETS SIZES LISTED LOT C5030

(4) PIECE SET CINCINNATI MONOSET SERIES A COLLETS SIZES LISTED LOT C5030

  • Dayton, Ohio, United States
  • Jan 30th
(4) PIECE SET CINCINNATI MONOSET SERIES A COLLETS SIZES LISTED LOT C5033

(4) PIECE SET CINCINNATI MONOSET SERIES A COLLETS SIZES LISTED LOT C5033

  • Dayton, Ohio, United States
  • Jan 30th
Aluminum Anodized Angle 3/4 x 3/4 x 48 in, 1/16 in thick, High Strength, .75,New

Aluminum Anodized Angle 3/4 x 3/4 x 48 in, 1/16 in thick, High Strength, .75,New

  • Old Fort, North Carolina, United States
  • Jan 30th
5C Collet Indexer with 5C Collets In Good Condition!

5C Collet Indexer with 5C Collets In Good Condition!

  • Plainville, Connecticut, United States
  • Jan 30th
HARDINGE DB59/DSM59 MOTOR PLATE

HARDINGE DB59/DSM59 MOTOR PLATE

  • Santa Clarita, California, United States
  • Jan 30th
8" Super Indexing Spacer with 8" Adjustable Chuck 0.0005" TIR,#SS-F3- NEW

8" Super Indexing Spacer with 8" Adjustable Chuck 0.0005" TIR,#SS-F3- NEW

  • Madison Heights, Michigan, United States
  • Jan 30th
6" HORIZONTAL & VERTICAL ROTARY TABLE, Part#TSL150- NEW

6" HORIZONTAL & VERTICAL ROTARY TABLE, Part#TSL150- NEW

  • Madison Heights, Michigan, United States
  • Jan 30th
New CNC Machine Rotational Axis, F Style A-Axis, 4th-Axis CNC Rotary Tables

New CNC Machine Rotational Axis, F Style A-Axis, 4th-Axis CNC Rotary Tables

  • Guangzhou, China
  • Jan 30th
VTG MORGAN No. 25 SWIVEL BENCH VISE 4 1/2 INCH JAW Pipe Jaws

VTG MORGAN No. 25 SWIVEL BENCH VISE 4 1/2 INCH JAW Pipe Jaws

  • Flatwoods, Kentucky, United States
  • Jan 30th
Vintage Large Cast Iron Swivel Base Vise - 5" Jaw

Vintage Large Cast Iron Swivel Base Vise - 5" Jaw

  • Modesto, California, United States
  • Jan 30th
Machinist Vise 3" - Cast Steel, Old

Machinist Vise 3" - Cast Steel, Old

  • Danbury, Connecticut, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies