hex head for sale, brand-new and used.

New Stainless steel hex head bolt 3/8"-24 thread x 5/8" long thread. Standard american size hex 9/16" These have a thru hole size of .177 to approx .220 There is lots of strength even with the thru hole, but you can make that decision. These were our out of tolerance drilled hole bolts.

#12 X 1 hex head sharp point slotted (500pcs) Zinc sheet metal screws

(1) 1-1/4-12 x 4 1/2 grade 8 hex head bolt i have a lot of these. lets make a deal. any questions please ask

LOT OF 47 HILLMAN LAG SCREWS HEX HEAD 3/8" x 4 1/2" ZINC PLATED STEEL ITEMS ARE BRAND NEW !

LOT OF 72 HILLMAN LAG SCREWS HEX HEAD 3/8" x 3 1/2" ZINC PLATED STEEL ITEMS ARE BRAND NEW !

LOT OF 150 HILLMAN LAG SCREWS HEX HEAD 5/16 x 3. 1/2" ZINC PLATED STEEL ITEMS ARE BRAND NEW !

New old stock have 100 + pieces on hand If less than 10 pieces required - price, $2.50 each

HERE ARE (8) GRADE 8 7/8-9X5-1/2 YELLOW ZINC PLATED HEX HEAD BOLTS LOOK AT PICTURES AND SEE IF YOU CAN USE THEM

Bought a large amount of vintage hard ware from a local estate auction. This is for 57 of these bolts, and original box as shown in photos. Box is in poor condition, and I have broken it down flat and will be sending it with the bolts.

LOT OF 36 NEW IN SEALED PACKAGE STAINLESS STEEL HEX BOLTS WITH NUTS, FLAT WASHERS AND LOCK WASHERS.( 36 ) BOLTS APPROXIMATE MEASURE LONG IS 2-1/2" LONG FULL THREAD M12 X 65MM A2-70 NBN,( 36 ) M12 NUTS A2-70, ( 72 ) M12 FLAT WASHERS,( 36) M12 LOCK WASHERS. FREE SHIPPING TO THE 50 STATES ONLY, THANKS !!!

This item has been fully tested by our tech department and is in good working condition. Item is guaranteed non-DOA and covered under our 14-day return policy. Item comes to you exactly as pictured - nothing more, nothing less.

5 PIECES 1/2-20 X 2 STAINLESS STEEL HEX HEAD CAP SCREWS WITH HEX NUTS MAXIMUM SHIPPING IS $7.50 AS LONG AS THE WEIGHT IS 13 OZ OR LESS AND THE VOLUME FITS INTO THE SIZE OF A FLAT RATE SMALL PRIORITY BOX. IF GREATER ON EITHER, THEN THE MAX COST INCREASE TO THE NEXT LEVEL OF $15.50 EQUAL TO THE FLAT RATE MEDIUM PRIORITY BOX. CONTACT SELLER FOR SHIPPING ASSITANCE.

Lot of 6 metric hex head bolts, M12-1.5 fine X 50mm long, steel, grade 8.8, bright zinc plated, DIN 960 partially threaded, 15mm unthreaded shoulder under head. This is the size used on 74 - 79 VW Super Beetle bumper shocks.

57 pieces 3/8-16 x1-1/4 HEX HEAD CAP SCREW. NEW.. 57 PIECES FREE SHIPPING S30400 THE

Yelloc zinc hex head cap bolt, 5/8"-18 x 2", Grade 8, package of 2 - with matching flat and lock washers. 2 inch long, fine pitch - 18 threads/in Ships same day if paid by 10AM MST. 30 day money back & free shipping!

3in long, fine pitch - 16 threads/in, 3/4" diameter hex head bolt with matching hex jam nut (5/8" tall), both grade 5. Head and nut fit a 1-1/8" socket Not really sure of the coating, if any, but fairly shinny. Ships same day if paid by 10AM MST, 30 day money back & free shipping

HEX HEAD CAP SCREWS BOLTS 3/8-16 X 3" LONG LOW CARBON STEEL ZINC PLATED (QTY. 21) NEW OLD STOCK Inventory Item #1655A WE OFFER COMBINED SHIPPING PLEASE WAIT FOR AN INVOICE

You are bidding on a lot of 25 pieces of a 6-1.0 x 180 mm hex head cap screw which is made of 18-8 stainless steel. These bolts are new. Please pay within 3 days of the end of the auction.

You are bidding on a lot of 50 pieces of a 10-1.5 x 45 MM18-8 stainless steel hex head cap screw which are new. They are fully threaded. Please pay within 3 days of the end of the auction.

1/4 - 20 x 1/2 18-8ss stainless steel hex head cap bolts full thread. Corrosion resistant. Brand new in box.