high pressure nitrogen regulator for sale, brand-new and used.

TURBOTORCH 0386-0814 Nitrogen purging: When brazing copper, it is imperative to purge with nitrogen in order to minimize or eliminate oxidation that results from heating the copper pipe. Without purging, oxidation will occur and the oxidized flakes that result can and will break off and flow through the system, damaging bearings and fouling system filters. All that is needed is a low pressure, low volume flow of nitrogen.

Brand New Turbo Torch 0386-0814 500 PSIG Nitrogen Purge Regulator 245-03P 245-03P Regulator, Nitrogen, DOT,TC Certified Nitrogen purging: When brazing copper, it is imperative to purge with nitrogen in order to minimize or eliminate oxi

Item has never been used, but the box has been opened. 1/4" MPT Right Hand Threads - will not work with TapRite regulators with LHT high pressure gauges.

This is a Victor Two Stage Nitrogen regulator. The number is VTS 400E. This Regulator is a refurbished unit.

HARRIS MODEL 8700 CGA E-4 high pressure regulator. Regulator was used for nitrogen to air up racing go kart tires. Use was very little, unit is in very good condition.

For your consideration is a new AirGas Y12-244F580 Analytical Specialty Gas High Purity Regulator with Needle Valve *Gas Service: Argon, Helium, Nitrogen Model: Y12-244F580 Specialty Gas High Purity Regulator Gauge Dials are 2 3/4" Specs: This analytical series of high-purity brass, two-stage regulators is recommended for non-corrosive analyticaland process applications where precise pr

Item(s): Victor Edge Series EHP3 High Pressure Inert Gas Regulator, EHP3-400-680, Victor part # 0781-5168 Compatibility: High pressure inert gas regulator (argon/nitrogen). CGA 680 inlet (tank) fitting. 1/4" compression fitting outlet.

Brand new wall mount high pressure dual gauge Co2 regulator. Comes complete with changeover valve and high pressure tubing. Could also be used for mixed gas or nitrogen.

Primary N2 and or Co2 gas cylinders. Was used on a Draft gas beer cylinder for beer kegs. This regulator is a high pressure adjustable regulator.

This listing is for a 0-600 PSI delivery pressure),NITROGEN, or other inert gas, regulator. The regulator has a 7000psi Tank gauge, and 600psi output gauge. Tested correct operation with 2000 psi argon tank.

Unitek EAPRO / MicroJoin B-2100-A Hot Bar Bonder for ACF/LCD/PCB/Flex Bonding and Rework Comes with a manual and what you see in the pictures. If you don't see it, you probably wont get it. Specifications are from MicroJoin and may vary slightly due to upgrades, options, or revisions this unit may or may not have.

6500 SeriesSingle Stage RegulatorMedium Duty Welding Features• 2.5” (63mm) Neoprene® Diaphragm • Steady pressure control• Medium-Large Seat Displacement• Good flow capacity• Capsule® Seat Assembly• High cycle life Material• Heavy Forged Brass Body• PTFE/PCTFE S

FisherBrand CGA540 Nitrogen Gas pressure regulator Catalog No.: 10-575-144 10-575-144 Regulator, Cylinder; Fisherbrand; Multistage; Outlet needle valve with 1/4 in. NPT male thread; For oxygen; Max. Inlet Pressure psig (MPa): 3000 (20.7); Delivery Pressure Range psig (MPa): 1-40 (0.006-0.27); CGA: 540

High pressure Nitrogen regulator for Stout, Porters, and or wine draft systems. Mix gas cylinders known as beer gas are also used with these regulators.

Barely used High pressure use Nitrogen regulator that was used on a blended gas cylinder for Stout and Porters beers. Heavy duty adjustable regulator. 1/4 inch barb on bottom for hose connections.

Taprite 742HPN 0-50 PSI Pressure Gauge, 1-Product/1-Pressure Co2 Regulator One (1) 0-3000 PSI Volumetric Gauge, One (1) 0-60 PSI Outlet Pressure Gauge