Hunkeler RW6 Rewinder w/ High Speed 490 ft/min Upgrade, 6'' Airshaft, US $21,995.00 – Picture 0

Hunkeler RW6 Rewinder w/ High Speed 490 ft/min Upgrade, 6'' Airshaft, US $21,995.00 – Picture 1

Hunkeler RW6 Rewinder w/ High Speed 490 ft/min Upgrade, 6'' Airshaft, US $21,995.00 – Picture 2

Hunkeler RW6 Rewinder w/ High Speed 490 ft/min Upgrade, 6'' Airshaft, US $21,995.00 – Picture 3

Hunkeler RW6 Rewinder w/ High Speed 490 ft/min Upgrade, 6'' Airshaft, US $21,995.00 – Picture 4

Hunkeler RW6 Rewinder w/ High Speed 490 ft/min Upgrade, 6'' Airshaft, US $21,995.00 – Picture 5

Hunkeler RW6 Rewinder w/ High Speed 490 ft/min Upgrade, 6'' Airshaft, US $21,995.00 – Picture 6

Hunkeler RW6 Rewinder w/ High Speed 490 ft/min Upgrade, 6'' Airshaft, US $21,995.00 – Picture 7

Hunkeler RW6 Rewinder w/ High Speed 490 ft/min Upgrade, 6'' Airshaft, US $21,995.00 – Picture 8

Hunkeler RW6 Rewinder w/ High Speed 490 ft/min Upgrade, 6'' Airshaft, US $21,995.00 – Picture 9

Hunkeler RW6 Rewinder w/ High Speed 490 ft/min Upgrade, 6'' Airshaft, US $21,995.00 – Picture 10

Hunkeler RW6 Rewinder w/ High Speed 490 ft/min Upgrade, 6'' Airshaft, US $21,995.00 – Picture 11

Hunkeler Rw6 Rewinder W/ High Speed 490 Ft/min Upgrade, 6'' Airshaft

US $21,995.00

Irving, Texas, United States
Jan 30th

Open on mobile:
QR code

Hunkeler RW6 Rewinders with High Speed Upgrade (490 ft/min) Installed - 1 Units Available Serial Numbers: 2009530 Max Speed (for listed S/N): 150 Meters/Min or 490 Feet/Min Items were purchased in a lot equipment deal from OEM. Items were under service contact before deinstallation in Feb 2014. Items are surplus inventory for us - unable to use in our current print environment. Operator, Service Manuals & 6'' airshaft assembly included with each unwinder. Please contact directly with any questions - 972.793.0709 ask for Josh General Description: 2.1.1 Purpose Rewinding of a continuous paper web printed in a non-impact printer fed from an Unwinding Module UW6 for subsequent finishing in a burster, cutter, enveloping system, etc. 2.1.2 Method of operation The roll core on the mandrel is moved mechanically into the working position on push-button command. Following the manual introduction of the paper web, the module initialization takes place automatically. The roll is driven from the center. To ensure constant web tension, the web passes through a braking unit. The rewinding speed is governed by a dancer control. A motorized device lowers the roll onto the roll cart. The paper rolls can be rewound in either direction. 2.1.3 Special technical features An efficient, heavy-duty Rewind Module handling rolls with a maximum diameter of 1370 mm / 54". Easy to use thanks to dancer lift and operator guidance via a touch panel. A triple dancer guarantees clean paper web contact, enabling both lightweight and heavyweight papers to be processed. The constant web tension, ensured by a non-slip brake unit and a centrally operating roll drive, guarantees that printed paper webs are wound tightly and with a straight edge. The infeed drive enables a decoupled arrangement with the preceding module. 2.1.4 Basic equipment – Rewind stand with electro-mechanical roll lifting – Operator interface with touch screen – Web tear and max. roll diameter detector – Pressure roller – Fully automatic dancer lift 2.1.5 Technical versions – Dancer lifting device 40 - 180 g/m2 – Dancer lifting device 40 - 300 g/m2 – Dancer lifting device for heavyweight paper >180 g/m2 – Choice of pneumatic mandrels, for core diameters of 70 mm, 150 mm, 200 mm, 3", 5" – Connevtion for air supply from UW6 – Service unit for external air supply – Compressor for built-in air supply – Infeed unit – Diverter roller 2.1.6 Optional equipment – Clamping sleeves

Condition	Used : An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes	“Items were purchased in a lot equipment deal from OEM and have operation wear and tear scratches and dents. Items were under service contact before deinstallation in Feb 2014.Items are surplus inventory for us - unable to use in our current print environment. Operator & Service Manuals included with each rewinder.”