inducer assembly for sale, brand-new and used.

For sale is a used but in excellent condition draft inducer assembly for a carrier/Bryant 90% furnace. The fan was removed due to an intermittent noise but after adding a "shim" to the top motor mount the fan ran perfectly for a week before changing the whole furnace for a different problem. Please feel free to ask any questions.

Good used Trane dual shaft inducer assembly Furnace was replaced due to bad heat exchanger 30 day guarantee

Jakel draft inducer assembly used on consolidated industries gas furnaces. Mfg = JakelModel # J238-200-2022Consolidated # 401570Volts = 115amps = 1.0RPM =3000

Used inducer motor assembly, draft motor

Used inducer assembly pressure switch, and back plate pulled from a working furnace with a bad heat exchanger. I ship same or next day. 100% positive feedback!

This is a used TRANE inducer fan motor assembly. It was working when it came off the unit. If you have any questions please feel free to ask

Consolidated industries draft inducer Item tested in great working condition 401570 J2382002022 Interchangeable with 401450 J2382002023, JA1090NS, JA1090 S1-02632588049, A.0 960

This is an inducer motor assembly for a carrier or Bryant furnace. Model je1do14n. Guaranteed for two weeks buyer pays back shipping.

For sale is a working draft inducer assembly for a Carrier/Bryant furnace. Motor tested and runs smooth, a piece of plastic is broken on the front cooking wheel (see last pic) it does not affect the operation also you can remove the wheel from your old one if you need too. Posted with eBay Mobile

For sale is a used draft inducer assembly, removed from an Amana furnace, tested and in good working order. Posted with eBay Mobile

TEMPLATE REVISED 9-02 FASCO LENNOX FURNACE DRAFT INDUCER MOTOR ASSEMBLY 70625441 TYPE U62B1 Sealed Ball Bearing, RPM 3200/2800 This used and working Fasco 2-speed Lennox furnace draft inducer motor was pulled from a 12- year old working Lennox G61MP Series furnace

Lennox Pulse, Part # 80C9301 Draft Inducer assembly, purge blower. Item is used but works normally. The part was pulled from a working furnace, thanks for looking.

This is a working assembly, taken from a working furnace for preventive maintenance. The motor does sometimes make a noise when spinning up and slowing down, and so will need to be replaced at some point. Otherwise, it is in very good shape.

YOU ARE BIDDING ON / PURCHASING A BRAND NEW / NEVER USED CARRIER INDUCER MOTOR ASSEMBLY PART / MODEL / STYLE NUMBER: 310371-752 YOU ARE BIDDING ON / PURCHASING A BRAND NEW MOTOR ASSEMBLY. IT WILL ARRIVE IN BRAND NEW WORKING CONDITION AS PICTURED IN THE ORIGINAL MANUFACTURERS BOX. REF: GAR LISTINGS / PHOTOS: I TRY TO SHOW EVERYTHING IN THE PI

FASCO 702111543 Draft Inducer Blower Motor Assembly D342094P03

Fasco Draft Inducer Blower Motor Assembly Part Number A158 Blower motor used for one heating season. I replaced the furnace when the AC died. This fits specific Amana units & is a replacement for numbers: 7062-2265, 7062-3151, 7062-4774, D9868605, D9868607, D9868614, D98686-7.

THE ITEM YOU ARE VIEWING IS ONE LENNOX 80C9301 DRAFT INDUCER ASSEMBLY. IT IS NEW BUT NO BOX OR MANUAL OR WIRING HARNESS. SHOULD BE INSTALLED BY A LICENSED PROFESSIONAL.

Packard 66002 Draft Inducer Blower Motor Assembly. All parts are brand-new and in the original factory packaging. Specifications: H.P.: 1/35 Speeds: 1 Volts: 115 Amps: 1.90 Rotation: CWLE RPM: 3000 Bearings: Ball

This is a used Power vent assembly from my 75 Gallon Bradford White Natural Gas hot water heater. This units worked perfectly for 7 years. Unit was pulled off of tank because heater tank started to rust.

This is aused inducer assembly off a retired furnace. Product has been tested for qualityassurance. Includes motor, mounting plate, and wheel.