Features: This multi-purpose manual lever ball valve has excellent corrosion resistance and is fit for many applications 1000 WOG:Max 1000 psi for Water, Oil, GasBody & Ball Type: Stainless Steel
This is for a brand new Jamesbury ball valve, 3/8" NPT, inline, high pressure, 1200 psi. I am listing all of the numbers on this valve because I am not sure what they mean. 3/8 AZ 2236 XTD SEAT CWP 1200 PSI WSP 475 PSI C13.
I also have about 5 of these ball valves taken from the chiller system of a plastic injection company. Valves were installed new in 2001 and company operated for about 6 years. Valves are fully operational and in very good condition.
I also have about 100 of these ball valves taken from the chiller system of a plastic injection company. Valves were installed new in 2001 and company operated for about 6 years. Valves are fully operational and in very good condition.
I also have about 100 of these ball valves taken from the chiller system of a plastic injection company. Valves were installed new in 2001 and company operated for about 6 years. Valves are fully operational and in very good condition.
I also have about 100 of these ball valves taken from the chiller system of a plastic injection company. Valves were installed new in 2001 and company operated for about 6 years. Valves are fully operational and in very good condition.
Description 1/2" NPT, Compact, 1/4 turn, lever operated, hot forged special LEAD FREE brass alloy with TEA coated ball. 100% full port. Blow-out proof two-piece design.
Galaxy threaded 3/4 inch ball valves, 6 pieces, forged bronze. Full bore, I think. (I have others like it and some say "full bore", and they're the same inner diameter) Free shipping!!
Asahi/America ball check valves have a free moving ball, which unseats to permit flow in one direction, but seals against a seat to prevent back flow. Features: - Uniseat/seal of FKM/Teflon - May be used horizontally only (no spring assist) - Minimum shut-off of 5 psi - All sizes rated for full vacuum service - Solid thermoplastic ball.
Up for auction is a Lot of 5 U-PVC in-line ball valves, as pictured. They are labeled as 1/2-in slip-type valves made to ANSI / NSF 61-9 standards for low lead and are rated to 150 psi at room temperature (73 degrees). Overall length: 3-1/4 in Overall height: 2-3/4 in Female connection ID measures 13/16 in (or 21 mm) All pieces are new without original packaging, as shown.
Description 1/2" NPT, Compact, 1/4 turn, lever operated, hot forged special LEAD FREE brass alloy with TEA coated ball. 100% full port. Blow-out proof two-piece design.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.