This is a complete set of the wheels to build your own 2” x 48” or 2” x 72” belt knife grinder. This listing includes: One - 4” drive wheel with a bore sized for a 5/8" (.625”) drive shaft with a 3/16” keyway. It is also broached to use with keyed shaft or can be used with a smooth shaft with a flat ground on it for the set screw.
A complete set of the wheels needed to build your own belt/knife grinder. Ideal for the 2” x 48” or 2” x 72” belt grinders used for making custom knives. This auction includes 1- 4” drive wheel.
These plans are to build a heavy duty sawmill. The saw is a fresh design based on a simple idea that the saw must be extremely strong, very accurate, easy to align and maintain, and cost efficient to build. It was built to cut Mesquite, a very hard wood, so it will make short order of any kind of wood you want to saw.
BEST HORSE DENTISTRY EQUIPMENT SET UP FOR PROFESSIONAL USE - ELECTRICAL AND HAND TOOLS OF THE BEST QUALITY AND CONDITION - YOU WILL EVER FIND ON EBAY – RETIRED HORSE DENTIST WILL ALSO PROVIDE PHONE AND EMAIL SUPPORT TO WINNING BIDDER IN USE OF ALL EQUIPMENT. HEADSTAND AND SPECULUMS listed are AVAILABLE ADDITIONALLY, IF INTERESTED TO THE WINNER OF THIS AUCTION. All of the materials are in EXCELLENT WORKING Condition.
Marked FS2 3237 1, 24T plastic (nylon?) SPROCKET 24" of timing chain 3/4" of an inch tall keyed for torque on motor fits .4" or 10mm shafts I believe it was for a Canon NP 3050 copier but could have many other uses
This new agricultural type gearbox is designed to handle up ti 10 hp at maximum revs of 540. Popular for saw benches ,augers ,elevators ,mower centre drives and other applications. # Ratio 1,9 :1 thru cross shafts # 3 x 25 mm keyed shaft # Direction of rotation always correct.
Description - Fan shall be duct mounted, belt driven centrifugal square inline. Certifications - Fan shall be listed by Underwriters Laboratories (UL 705) and UL listed for Canada (CSA Standard 113 - M1984). Fan shall bear the AMCA Certified Ratings Seal for Sound and Air Performance.
Designed by Lesson in Grafton, Wisconsin, this general purpose motor can be used for many applications requiring a high horsepower three phase electric motor. The motor comes with a rigid base mount with a keyed shaft. There is a wiring diagram on motor name plate.
This is a Rex 20:1 speed reducing gearbox which is in great working order. Made by Rex, Perfection, American Division, Darlington, SC. Model # ST 1820SB, Serial # 1172F.
Solid cast iron balanced wheel pulleys used for making portable band saw band wheels. You'll need two 18.75 "pulleys, two 59" belts and two split taper bushings to complete the 19" band wheels. You'll also need keyed shaft, drive pulleys and pillow block bearings.
4 Colson Soft Performa Rubber 8" x 2" Flat Tread Wheels The 3/4" Shafts are keyed with 3/16" keyway. 2 are 5" long and 2 are 5 1/2" long. One end is tapped 1/4 -20 The 4 Bearings are 3/4" tapped base.
EATON Vickers Adjustable Speed Hydraulic DriveModel TR3-HR18 F 18-20 This is a great unit for controlling the speed of any number of shop tools: lathe, drill press, mill, band saw Power source: Constant speed input supplied by up to 1 hp electric motor at 1150 to 1800 rpm. Input power must be 1/4hp more than required output power. Load: a maximum of 3/4hp & 40 in-lbs of torque is possible.
This product was previously in service, but it is in very good working condition. This product sells as is. Although shipping is marked as local pick up only, but this is because eBay does not show the appropriate shipping option for this pump.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.