+ Post new Ad
Knife Making:14" x 2" Belt Sander 70 Duro Rubber Contact Wheel 3/4" ID Bearings, US $345.00 – Picture 0
Knife Making:14" x 2" Belt Sander 70 Duro Rubber Contact Wheel 3/4" ID Bearings, US $345.00 – Picture 1
Knife Making:14" x 2" Belt Sander 70 Duro Rubber Contact Wheel 3/4" ID Bearings, US $345.00 – Picture 2
Knife Making:14" x 2" Belt Sander 70 Duro Rubber Contact Wheel 3/4" ID Bearings, US $345.00 – Picture 3
Knife Making:14" x 2" Belt Sander 70 Duro Rubber Contact Wheel 3/4" ID Bearings, US $345.00 – Picture 4
Knife Making:14" x 2" Belt Sander 70 Duro Rubber Contact Wheel 3/4" ID Bearings, US $345.00 – Picture 0
Knife Making:14" x 2" Belt Sander 70 Duro Rubber Contact Wheel 3/4" ID Bearings, US $345.00 – Picture 1
Knife Making:14" x 2" Belt Sander 70 Duro Rubber Contact Wheel 3/4" ID Bearings, US $345.00 – Picture 2
Knife Making:14" x 2" Belt Sander 70 Duro Rubber Contact Wheel 3/4" ID Bearings, US $345.00 – Picture 3
Knife Making:14" x 2" Belt Sander 70 Duro Rubber Contact Wheel 3/4" ID Bearings, US $345.00 – Picture 4

Knife Making:14" X 2" Belt Sander 70 Duro Rubber Contact Wheel 3/4" Id Bearings

US $345.00

  • Anderson, South Carolina, United States
  • Jan 30th
Open on mobile:
QR code
Knife Making:   14" x 2" a True Rubber Belt Sander Contact Wheel with 3/4" ID Bearings. This wheel has been dynamically balanced. New, from old factory liquidation. Rare Find & Real Bargain at my listing price. Limited quantity and your chance to own one. Nationally sold for over $470.00 (without bearings).    Serrated Rubber Contact Wheel For Belt Grinder. Wheel OD : 14",   Width : 2" Ball Bearings: ID (bearing inside diameter) 3/4", fully sealed with cylindrical (flat) outer race and comes with a snap ring.  They have wide inner race and come with 2 set screws to allow tightening against the shaft once fitted. Rubber Hardness 70A Duro. (this is the mostly used contact grinding wheels hardness by the knife makers) Net weight 11 lb Each wheel I sell comes tested on my grinder at 5600 RPM. Guaranteed!   However the recommended running speed for this size wheel should be around 2800 RPM’s. If you don't have an idea of how much these wheels cost and how much they can save buying here, please refer to the last listing photo. For anyone interested to see how this wheel performs I made a rather primitive YouTube video. It shows how perfectly this wheel works when mounted on my 2 x 72" belt grinder. Copy the link from the last photo to your browser if you would like to see it.

Directions

Similar products from Toold for Grinding Machines

Model #125M TIMESAVER 25" Belt Sander for Deburring & Finishing w/Baldor motor

Model #125M TIMESAVER 25" Belt Sander for Deburring & Finishing w/Baldor motor

  • Bensalem, Pennsylvania, United States
  • Jan 30th
SMALL MACHINIST STEEL ANGLE PLATE GRINDING MILLING JIG FIXTURE

SMALL MACHINIST STEEL ANGLE PLATE GRINDING MILLING JIG FIXTURE

  • Waterford, Michigan, United States
  • Jan 30th
MACHINIST V BLOCK GRINDING DRILL PRESS MILL SETUP JIG FIXTURE

MACHINIST V BLOCK GRINDING DRILL PRESS MILL SETUP JIG FIXTURE

  • Waterford, Michigan, United States
  • Jan 30th
VTG.SINE BAR TOOLMAKER SINE PLATE BY O.K. MACH & TOOL CO.WACO TX.11-1/4 IN LONG

VTG.SINE BAR TOOLMAKER SINE PLATE BY O.K. MACH & TOOL CO.WACO TX.11-1/4 IN LONG

  • La Puente, California, United States
  • Jan 30th
2 MACHINIST SETUP I BEAMS PARALLELS JIG FIXTURE MACHINIST TOOLING

2 MACHINIST SETUP I BEAMS PARALLELS JIG FIXTURE MACHINIST TOOLING

  • Waterford, Michigan, United States
  • Jan 30th
VTG.SINE BAR TOOLMAKER SINE PLATE BY O.K. MACH & TOOL CO.WACO TX.6-1/4 IN LONG

VTG.SINE BAR TOOLMAKER SINE PLATE BY O.K. MACH & TOOL CO.WACO TX.6-1/4 IN LONG

  • La Puente, California, United States
  • Jan 30th
L.H. SURFACE TOOL GRINDING GRINDER ARBOR MACHINIST TOOLING

L.H. SURFACE TOOL GRINDING GRINDER ARBOR MACHINIST TOOLING

  • Waterford, Michigan, United States
  • Jan 30th
BLACK DIAMOND 2B DRILL GRINDER SETUP JIG COLLET PARTS AND PIECES WHEEL DRESSER

BLACK DIAMOND 2B DRILL GRINDER SETUP JIG COLLET PARTS AND PIECES WHEEL DRESSER

  • Waterford, Michigan, United States
  • Jan 30th
K.O. Lee adapter sleeve B&S 11 to MT 2 (Inv.32073)

K.O. Lee adapter sleeve B&S 11 to MT 2 (Inv.32073)

  • Portland, Connecticut, United States
  • Jan 30th
Black and Decker 4052, Industrial Heavy Duty 7"/9" Angle Sander

Black and Decker 4052, Industrial Heavy Duty 7"/9" Angle Sander

  • Pottstown, Pennsylvania, United States
  • Jan 30th
Jancy Pilot Pin

Jancy Pilot Pin

  • Westfield, Massachusetts, United States
  • Jan 30th
Baldor Grinder

Baldor Grinder

  • Anaheim, California, United States
  • Jan 30th
Van Norman 253 Camshaft Grinder

Van Norman 253 Camshaft Grinder

  • Highland, Michigan, United States
  • Jan 30th
6" W 12" L Harig 612 SURFACE GRINDER, ACCURITE DRO

6" W 12" L Harig 612 SURFACE GRINDER, ACCURITE DRO

  • Lexington, North Carolina, United States
  • Jan 30th
Ribon Rur 500 Cylindrical Grinder CGS1

Ribon Rur 500 Cylindrical Grinder CGS1

  • Vancouver, British Columbia, Canada
  • Jan 30th
ASV HIGH SPEED HIGH FREQUENCY SPINDLE MOTOR FOR MILLING GRINDING ROUTER

ASV HIGH SPEED HIGH FREQUENCY SPINDLE MOTOR FOR MILLING GRINDING ROUTER

  • United States
  • Jan 30th
K.O. Lee S718-HA Hydraulic Surface Grinder with Coolant Pump & Tank

K.O. Lee S718-HA Hydraulic Surface Grinder with Coolant Pump & Tank

  • Southampton, Pennsylvania, United States
  • Jan 30th
Boyar Shultz 612 DeLuxe Hand Feed Surface Grinder with Walker Chuck

Boyar Shultz 612 DeLuxe Hand Feed Surface Grinder with Walker Chuck

  • Southampton, Pennsylvania, United States
  • Jan 30th
brown & sharp highspeed surface grinder attachment 623-34-618-29

brown & sharp highspeed surface grinder attachment 623-34-618-29

  • Millstadt, Illinois, United States
  • Jan 30th
Hybco Relief Grinder Work Head, type 2100 SB

Hybco Relief Grinder Work Head, type 2100 SB

  • Rocky Point, New York, United States
  • Jan 30th

People who viewed this item also vieved

CARBOLOY LATHE TOOL HOLDER MSSNL-24-6E STK 1146

CARBOLOY LATHE TOOL HOLDER MSSNL-24-6E STK 1146

  • Wadley, Alabama, United States
  • Jan 30th
PHANTOM LATHE TAIL STOCK

PHANTOM LATHE TAIL STOCK

  • United States
  • Jan 30th
LATHE TOOL POST HOLDER~4 WAY~7-1/2“ X 7-1/2“ SQUARE~ONTARIO, CALIF.

LATHE TOOL POST HOLDER~4 WAY~7-1/2“ X 7-1/2“ SQUARE~ONTARIO, CALIF.

  • Ontario, California, United States
  • Jan 30th
USED KENNAMETAL 4" FACE MILL

USED KENNAMETAL 4" FACE MILL

  • Myrtle Beach, South Carolina, United States
  • Jan 30th
BRIDGEPORT Vertical Turret Mill, #2J,

BRIDGEPORT Vertical Turret Mill, #2J,

  • Odessa, Florida, United States
  • Jan 30th
8''x12'' swivel angle plate fits bridgeport milling machine heavy cast T-slot

8''x12'' swivel angle plate fits bridgeport milling machine heavy cast T-slot

  • Millstadt, Illinois, United States
  • Jan 30th
ACORN THREADING DIE, 1/8-27 WIDELL #3 BLANK, 1 1/4" OD

ACORN THREADING DIE, 1/8-27 WIDELL #3 BLANK, 1 1/4" OD

  • Marshall, Michigan, United States
  • Feb 15th
Helical TWM Keysert Range Kit Thread Repair 5 to 12 Tapping Carbon In Case

Helical TWM Keysert Range Kit Thread Repair 5 to 12 Tapping Carbon In Case

  • Fayetteville, North Carolina, United States
  • Feb 15th
ACORN THREADING DIE 1/2"-32 #3 BLANK, 1 1/4" OD

ACORN THREADING DIE 1/2"-32 #3 BLANK, 1 1/4" OD

  • Marshall, Michigan, United States
  • Feb 15th
BRIDGEPORT MLL V2X GUSHER COOLANT SYSTEM

BRIDGEPORT MLL V2X GUSHER COOLANT SYSTEM

  • Kosciusko, Mississippi, United States
  • Feb 15th
BROKEN Hardin 426 metal smelter, Good for Parts-might be Salvagable Free Shippin

BROKEN Hardin 426 metal smelter, Good for Parts-might be Salvagable Free Shippin

  • Millsboro, Delaware, United States
  • Feb 15th
Foley Belsaw Automatic Retoother Model S2000 With 5 Ratchet Index Bars No Reserv

Foley Belsaw Automatic Retoother Model S2000 With 5 Ratchet Index Bars No Reserv

  • San Jose, California, United States
  • Feb 15th
52 X 16 GAUGE TENNSMITH JUMP OR STOMP SHEAR, FRONT SUPORT ARMS

52 X 16 GAUGE TENNSMITH JUMP OR STOMP SHEAR, FRONT SUPORT ARMS

  • Pinellas Park, Florida, United States
  • Feb 21st
Peck, Stow, & Wilcox 37" foot stomp shear Model 137-J

Peck, Stow, & Wilcox 37" foot stomp shear Model 137-J

  • Anthony, New Mexico, United States
  • Feb 21st
Used Peck, Stow, & Wilcox 37" foot stomp shear Model 137

Used Peck, Stow, & Wilcox 37" foot stomp shear Model 137

  • Anthony, New Mexico, United States
  • Feb 21st
15" Lapmaster Model 15 Bench Model Precision Flat Lapping Machine

15" Lapmaster Model 15 Bench Model Precision Flat Lapping Machine

  • Libertyville, Illinois, United States
  • Feb 21st
SUNNEN HONE 2G-P28-1187VB MANDREL STK 2363

SUNNEN HONE 2G-P28-1187VB MANDREL STK 2363

  • Wadley, Alabama, United States
  • Feb 21st
LOT OF SUNNEN HONING STONES ***NEW OLD STOCK***

LOT OF SUNNEN HONING STONES ***NEW OLD STOCK***

  • Anaheim, California, United States
  • Feb 21st
0.75" Dia. Star SR-20 CNC SWISS TYPE LATHE, Fanuc 16T

0.75" Dia. Star SR-20 CNC SWISS TYPE LATHE, Fanuc 16T

  • Harrison, New Jersey, United States
  • Mar 2nd
The Graham No.2 Universal Knurl Holder Morse No.3 Taper

The Graham No.2 Universal Knurl Holder Morse No.3 Taper

  • Chicago, Illinois, United States
  • Mar 2nd
3/4", 1/4" Knurl Holder for Turret Screw Machine 1" Shank

3/4", 1/4" Knurl Holder for Turret Screw Machine 1" Shank

  • Chicago, Illinois, United States
  • Mar 2nd
Magnetic Chuck * EDM Cnc Machinist Toolmaker Mill Lathe Drill

Magnetic Chuck * EDM Cnc Machinist Toolmaker Mill Lathe Drill

  • Seekonk, Massachusetts, United States
  • Mar 24th
Charmilles Technologies Roboform 20 Diesinking EDM Machine -Almost new-20 hours!

Charmilles Technologies Roboform 20 Diesinking EDM Machine -Almost new-20 hours!

  • DeKalb, Illinois, United States
  • Mar 24th
MACHINIST LATHE MILL EDM Chuck ? g

MACHINIST LATHE MILL EDM Chuck ? g

  • Morris Plains, New Jersey, United States
  • Mar 24th
Doall Saw Variable Speed Transmission

Doall Saw Variable Speed Transmission

  • Bensenville, Illinois, United States
  • May 6th
Doall 2 Speed Transmission

Doall 2 Speed Transmission

  • Placentia, California, United States
  • May 7th
Craftsman Industrial 12" Bandsaw, 2 spd, 3/4 hp

Craftsman Industrial 12" Bandsaw, 2 spd, 3/4 hp

  • Hallieford, Virginia, United States
  • May 7th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies