od grinder for sale, brand-new and used.

For sale "There are two" Brown & Sharpe O.D grinders they are both model No 5 Brown & Sharpe O.D. grinder The machines come with many used wheels in deferent grades and grits types and work centers male and femal, work light and one of the two machine's comes with an arnold gage attachment attachment. Local pick up.

Need a grinder to handle big jobs? This # 32, 1-1/2 HP stainless steel grinder is the unit. The 1-1/2 HP motor can grind approximately 17 lbs.

10x20 landis OD and ID grinder with 5 c collet nose with auto in feed and table good condition call for details 220/440 volt 3 phase 818-355-2974

Landis 4H od grinder excellent condition rebuilt 10 years ago and in one man grind shop works perfect call Sean 818-355-2974 load for free

Used Cincinnati grinder od

Anderson twist wire wheel for bench grinder. 6" OD x 1 1/4" Wide 8000 RPM Wire dia. .015 Accepts 1/2" or 5/8" shafting Made in the USA

This lot is 2 Anderson bench grinder crimped wire wheels. 6" OD x 1 1/4" Wide 6000 RPM Wire dia. .014 Accepts 1/2" or 5/8" shafting Made in the USA One wheel does not have the adapter side plates for mounting.

Anderson crimp wire wheel for bench grinder. 6" OD x 1 1/4" Wide 6000 RPM Wire dia. .014 Accepts 1/2" or 5/8" shafting Made in the USA

This is a complete set of the wheels to build your own 2” x 48” or 2” x 72” belt knife grinder. This listing includes: One - 4” drive wheel with a bore sized for a 5/8" (.625”) drive shaft with a 3/16” keyway. It is also broached to use with keyed shaft or can be used with a smooth shaft with a flat ground on it for the set screw.

Thousands of Used Metalworking and Plastic Machines & New Machine Tools Photos, Full Descriptions and Prices - Fast & Easy

Kondo 250--H-TS OD GRINDER, I.D. ATT., HYD. Tbl, AUTO INFEED, PL

This #2 Brown & Sharpe OD grinder has been used everyday for the past 6 years. We purchased the grinder about 6 years ago and have used it everyday. We are a gage builder and hold very tight tolerances.

Up for sale is our Landis 10" X 24" Type CH Universal OD/ID grinder w/swing down ID spindle, internal grinding spindle was just recently rebuilt w/new Barden precision bearings, machine is currently under power and is used on a regular basis but it does have a hydraulic spool valve for the table traverse that is leaking. Machine is still fully functional and grinds good. It does not leak hydraulic fluid on the floor, just back into the sump.

Brown and Sharpe No 2 universal Grinder Two Wheel 3" Riser swing 21" x 30" 460 voltage

For sale, this Studer S40-12 CNC O.D.-I.D. Universal grinder, serial number 2101.11, manufactured in 1984, made in Switzerland. Some of the technical data for this Studer S40-12 grinder are as follows, Center height= 4.9/6.9" 125/175mm Center distance= 25.6/39.4" 650/1000mm Grinding length= 25.6/39.4" 650/1000mm Wheelhead slide range= 45 degrees Workhead swivel range= 0-90 degrees

Thousands of Used Metalworking and Plastic Machines & New Machine Tools Photos, Full Descriptions and Prices - Fast & Easy

UNIVERSAL CUTTER GRINDER SHARPENER MACHINE MR-20A NEGATIVE ANGLE 0 - 52 DEGREE

Knife Making:12" x 2" a True Rubber Belt Sander Contact Wheel with 5/8" ID Ball Bearings and Shaft. New, from old factory liquidation.