Aluminum Angle 5/8” x 5/8” x 48 in, 1/16 in thick, 5/8 IN x 5/8 IN, NEW! Description – I originally fabricated these angles for the building of solar panels and eventually realized other people had lots of other uses for them. I been selling these since Feb of 2013 and will keep making them as needed.
Aluminum Offset Angle 1” x 2” x 48 in, 1/16 in thick, 1 IN x 2 IN, NEW! Description – I originally fabricated these angles for the building of solar panels and eventually realized other people had lots of other uses for them. I been selling these since Feb of 2013 and will keep making them as needed.
Aluminum Angle 2” x 2” x 48 in, 1/16 in thick, 2 x 2 in, NEW!, Angles Description – I originally fabricated these angles for the building of solar panels and eventually realized other people had lots of other uses for them. They are very slightly less than a 1/16 of an inch thick. They measure 2 x 2 x 48 inch.
For pricing or shipping discounts, combination orders, volume discounts, purchasing over the phone, or general information please call me on my cell at: (six, seven, eight,)-(two, zero, zero)-(zero, eight, six, two). Aluminum Angle 1/2 ” x 1/2 ” x 48 in, 1/16 in thick, .5 IN x .5 IN, NEW! Description – When
Aluminum Pro Channel 3/4 x 3/4 x 3/4 x 48 in, 1/16 in thick, .75 in Description – This is a special type of angle that was developed out of my solar panel business for the building of solar panels and eventually I realized other people had lots of other uses for them. How it works is that there are two 3/4 in channels riveted together. You can use the channel as is or, because it has layers, you can cut through one or both layers to create tabs that c
THIS IS A "LOT" OF 24 GE FANUC MANUALS. ALL BUT THREE WERE MFG. 1994 ALL OF THESES BOOKS HAVE BEEN USED AND VARY IN CONDITION BUT DO APPEAR TO BE COMPLETE.
Aluminum Square Tubing – 1/2" OD x 1/16” x 24" Long NEW, .062, .5 IN, Description – These are a product of our solar panel division. They measure 1/2" OD x 1/16” x 24 inch. They are strong and easy to work with and are a 6063 T5 type aluminum.
Aluminum Round Tubing – 1.5" OD x 1/16” x 248" Long NEW, .062, 1.5 IN Description – These are a product of our solar panel division. They measure 1.5" OD x 1/16” x 24 inch. I also have this in 24in lengths.
Aluminum Round Tubing - 1" OD x 1/16” x 48" Long NEW, .062, .75 IN Description –They measure 1" OD x 1/16” x 48 inch. They are a 6063 T5 type aluminum, strong and light. They have no finish and may come with rub marks, scratches, and scuffs but will be straight with no dents.
Aluminum Flat Diamond Plate Sheet Stock 1 in x 48 in, 1/16 thick, 1in, 1 in, 1”, New Description –They measure 1 x 48 inch. This also goes by the names of Tread Brite and Has Plate. They are easy to work with and are a 3003 type aluminum.
Aluminum Flat Diamond Plate Sheet Stock 6 in x 48 in, 1/16 thick, 6in, 6 in, 6”, New Description –They measure 6 x 48 inch. This also goes by the names of Tread Brite and Has Plate. They are easy to work with and are a 3003 type aluminum.
Aluminum Flat Diamond Plate Sheet Stock 12 in x 48 in, 1/16 thick, 12in, 12 in, 12”, New Description –They measure 12 x 48 inch. This also goes by the names of Tread Brite and Has Plate. They are easy to work with and are a 3003 type aluminum.
Aluminum Flat Sheet Stock 12 in x 48 in, 1/4 thick, .25in, Bar, USA! Description –This measure 12 x 48 x .25in thick. They are easy to work with and are a 5052 type aluminum, which is basically the same as 6061, just a little easier to work with.
Aluminum Round Tubing – 1.25" OD x .090” x 48" Long NEW, .062, .1 1/4 IN. Description –They measure 1.25" OD x .090” x 48 inch. They are a 6063 T5 type aluminum, strong and light.
The seller is a PhD Chemical Engineer, the other ones selling are NOT. Who's product would you trust? The Chinese stuff is not very good others are selling no-brand COUNTERFEIT RODS.
INTERNATIONAL LISTING: THE US POST OFFICE INCREASED INTERNATIONAL POSTAGE RATES ALMOST 100% ON JANUARY 27 2013, THE RATES ARE MUCH CHEAPER FOR LESS THAN 1/4 POUND, SO I AM OFFERING as close to 90 GRAMS as I can get. about 3.20 ounces. YOUR CHOICE of rods Seller is a PhD Chemical Engineer/Inventor BE CAREFUL - OTHERS ARE SELLING POOR COUNTERFEIT RODS Aluminum REPAIRS, ALUMALOY, DURAFIX, HTS 2000, ALADDIN ARE BASICALLY THE SAME!
The seller is a PhD Chemical Engineer, the other ones selling are NOT. Who's product would you trust? The Chinese stuff is not very good others are selling no-brand COUNTERFEIT RODS.
The seller is a PhD Chemical Engineer, the other ones selling are NOT. Who's product would you trust? The Chinese stuff is not very good others are selling no-brand COUNTERFEIT RODS.
>< Here is what the Accu-Strike helmet will do for you. Leaves both hands FREE to work with Doubles as a grinding shield Lets you view through a BIG 100% CLEAR safety lens (Not shaded like the auto darkening lens) Increases your welding speed and accuracy
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
