Offering for consideration : Wood Lathe 16" swing x 33" long / Drum sander 3" x 2 1/4 with extra sanding tubes / 10" Table Saw with arbor and blade + lower guard / Table extension / Drill press with chuck ( included ) ALL IN ONE MACHINE Heavy machine with NEW retractable casters . Ready to connect attachments like Band Saw and Router with proper devices ( not included ) All show in the pictures with exception of piece of wood on the lathe is what you bid for.-
A super clean slightly used not refurbished (nothing needs repairs ) Whacheon 23x80 gap bed ALL ORIGIONAL (gap never removed) this lathe is in new condition never crashed or been beat save almost $20,000.00 over a new lathe. List for a new lathe $42,995.00 Comes with same WARRANTY 1 YEAR as a new lathe . Spindle is D1-8 3" thru hole cam-loc .
Nice Original Set of Headstock Safety Gear Guards for an Atlas 10" Lathe. Marked with part numbers 10D-247 and 10D-246. If you plan on purchasing multiple items I would be glad to combine shipping, please do not pay until I send an invoice with correct combined shipping.
For Sale is a Kent 1340 Gap lathe which when the gap is removed will swing over 18". I bought this machine new and have only put about 20 hours on it. The paint is like new, it is powered by 220 SINGLE PHASE which can be run off of house current without using a phase converter.
Complete set of 4 Thin 11/16 hinge nuts to fit your Atlas or Craftsman 10-12" lathe. Shown on a QC42. Same as QC54, TH54, TH42 and many others with 3/8" guard hinge pins.
Nice SOUTH BEND 9" LATHE GEAR GUARDNo crack, chips or welds. Needs a little paint here and there.But that is it. Ready to go back to work again.Not shown in photo is the post that slides into bracket which is on your latheorYou can check my other items for sale and buy the bracket too.
really good older wood lathe. was working fine until the power switch was ruined when it was being moved-so a new switch needs to be wired up. comes with all the tools you see in the photos.
!!!!!!!!!!! OPERATES USING PRESSURE TANK OR STANDARD SHOP AIR LINE !!!!!!!!!!!! Go TO www.advancelifts.com SO TO VERIFY INFORMATION BELOW WORK LOAD 800 LBS.
Hello Folks, Today we have an Atlas Gear Guard Knob with spring. It is in good, used condition, No damages, please see all pics. Please check out our Ebay store for other great buys.
This is a Logan, Wards, Power Kraft change gear guard. Fits 10 inch lathe. Cleaned down to bare metal and painted with good oil base paint to match Logan color.
6" ATLAS 618 CRAFTSMAN 101 METAL LATHE LOWER SWIVEL, CUSTOM MADE CHIP GUARD, BRASS NUT, GIB, GIB SCREWS, THE FOLLOWING ARE THE PART NUMBERS M6-301 M6-37 M6-19A M6-56 ALL IN VERY GOOD CONDITION. IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK, IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S.
End Gear Guard Bracket #L-1661 for XL Series 10" Sheldon Lathe Includes adjusting set screws, no cracks or repairs. No international, ask questions before bidding, always happy to combine shipping when possible.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.