loading dock covers for sale, brand-new and used.

EXCELLENT TRANSFORMER USED FOR LESS THAN A MONTH FOR TEMPORARY POWER INSIDE AT A CONSTRUCTION SITE. STILL ON ITS ORIGINAL SHIPPING PALLET. BUYER PAYS FREIGHT SHIPPING ON 547LBS OR FREE PICKUP 1 HR NORTH OF ATLANTA014-10-03-335-233 PLEASE READ BEFORE BIDDING: NO RETURNS description information above supersedes any return or condition info in the data below: BEFORE MAKING YOUR PURCHA

VERY NICE USED GREENLEE 777 BENDER WITH PUMP, RAM PINS, HOSE, DIES FOR 1-1/4, 1-1/2, 2, 2-1/2,3, 3-1/2,4"ALSO INCLUDES 782 BENDER THAT WORKS WITH THE SAME RAM, WITH A COMPLETE DIE SET FOR 2"; 1-1/2" SHOE & SADDLE, AND 1-1/4" SHOE ONLY WITH STORAGE BOX, WHICH EVERYTHING FITS IN EASILY. YOLK FOR CYLINDER IS A LITTLE ROUGH (USED ONLY FOR THE 782) BUT WORKS. APPROX 350LBS, EMAIL FOR SHIP QUOTE.

GOOD USED HYDRAULIC TERMINAL LUG CRIMPER. WORKS WELL, COMES WITH DIES SHOWN, YOU NEED TO PUSH BACK THE RAM BY HAND (EASY TO DO) TO OPEN IT AFTER A CRIMP. I DON'T KNOW IF THAT'S THE WAY THESE NORMALLY OPERATE, BUT IT CRIMPS FINE.

GOOD USED VIPER 25, HEATED HOSE, HEATED SOLENOID NOZZLE, AND PHOTO EYE TO ACTUATE THE NOZZLE SOLENOID.  230VAC.  CART NOT INCLUDED, SHIPS FREIGHT.

Very nice kaivac kaizen no touch cleaning system for janitorial work, 300psi pressure washer with adjustable stream to fan nozzle gun with chemical injection, wet/dry vac easy rolling, works great. 2nd unit available, inquire. buyer pays freight from 30527014-08-03-200-2 PLEASE READ BEFORE BIDDING: NO RETURNS description information above supersedes any return or condition info in the data below:

used industrial duty pneumatic banding machine in excellent shape, works great. verify that this machine suits your strapping width from the photos014-03-02-62-962 PLEASE READ BEFORE BIDDING: Contact me for correct freight rates as the calculator may be incorrect EBAY STORE NAME: indu

used lockformer pittsburgh lock machine, with drive cleat roll setup, also with custom fold out support table. 110volt, runs great. see the machine doing a pittsburgh lock see the machine doing a drive cleat buyer pays freight shipping on 390lbs from 30527.

ELECTRICALLY OPERATED C FRAME PRESS. 3-1/4" ID DIE HOLDER, 1" DIA PUNCH HOLDER, 3HP 3 PHASE 230/460V, ADJUSTABLE STROKE VIA LIMIT SWITCH STOPS, MANUAL UP DOWN OR SET TO AUTO, PRESS THE FOOT PEDAL AND IT WILL STROKE DOWN AND RETURN. 5" THROAT DEPTH, approx 2.5" stroke, press force is approx 5 tons based on 3" cylinder diameter and 1500psi guage pressure.

lockformer 24ga portable machine forms the bend shown in photo 4. works well. Buyer pays ups shipping on 130lbs from 30527 oversize; email for a quote as the UPS calculator will not be correct for this oversize package.

GOOD USED TORQUE WRENCH BOLT TENSION CALIBRATOR. SHIPS IN ITS WOODEN CRATE IN A BOX. READY TO WORK014-10-03-24-38 PLEASE READ BEFORE BIDDING: NO RETURNS description information above supersedes any return or condition info in the data below: BEFORE MAKING YOUR PURCHASE Contact me for freight cost (applies only to items shipped by truck freight)

USED, VERY GOOD CONDITION VARIABLE SPEED MOTORIZED ROOFING SEAM HOT AIR WELDER. WORKS GREAT, VARIABLE TEMP AND SPEED, 220V TWIST LOCK PLUG , WITH METAL CASE. BUYER PAYS UPS SHIPPING ON 150LBS FROM 30527 014-011-01-45-714C PLEASE READ BEFORE BIDDING: NO RETURNS description information above supersedes any return or condition info in the data below:

USED, VERY GOOD CONDITION VARIABLE SPEED MOTORIZED ROOFING SEAM HOT AIR WELDER. WORKS GREAT, VARIABLE TEMP AND SPEED, 220V TWIST LOCK PLUG , WITH METAL CASE & WEIGHTS. BUYER PAYS UPS SHIPPING ON 150LBS FROM 30527 014-011-01-45-714B PLEASE READ BEFORE BIDDING: NO RETURNS description information above supersedes any return or condition info in the data below:

USED, VERY GOOD CONDITION VARIABLE SPEED MOTORIZED ROOFING SEAM HOT AIR WELDER. WORKS GREAT, VARIABLE TEMP AND SPEED, 220V TWIST LOCK PLUG , WITH METAL CASE & WEIGHTS. BUYER PAYS UPS SHIPPING ON 150LBS FROM 30527 014-011-01-45-714 PLEASE READ BEFORE BIDDING: NO RETURNS description information above supersedes any return or condition info in the data below:

LINCOLN IDEALARC TM-400/400 WELDING POWER SUPPLY. THIS UNIT IS USED AND HAS YET TO BE TESTED, THUS SOLD AS IS UNTIL I GET A CHANCE TO TEST ( I DON'T HAVE ADEQUATE POWER TO TEST), WITH NO WARRANTY OR RETURNS ON THIS ITEM UNTIL I GET TO RUN IT, AT WHICH TIME I'LL REVISE THIS LISTING.AC DC 400 AMP, RUNS ON 230V 146 AMP DRAW OR 460V 73 AMP DRAW. TOUGH TO FIND A MACHINE OF THIS CAPACITY THAT RUNS ON SINGLE PHASE POWER.BUYER PAYS FREIGHT SHIPPING ON 960LBS FROM 30527 PLEASE READ BEFORE BIDDING:

EXCELLENT CONDITION DAYTON 3AA25 CENTRAL DUST COLLECTION UNIT FROM GRAINGER, COST WAS $3141. 2600CFM, 9450 FPM, 8" INLET, 5 MICRON BAG. NOTE UNIT WILL SHIP WITH NO DRUMS- NO SENSE IN PAYING TO SHIP DRUMS THAT CAN BE SOURCED LOCALLY FOR CHEAP OR FREE.

beautifully refurbished master disc sander. this model does not have integral dust collector fan so requires connection to a dust collector. awesome machine, wired 230v 3 phase only.

VERY NICE 3HP RADIAL ARM SAW, SINGLE PHASE 115/230V (SET UP FOR 230V) WORKS GREAT. ARM IS NICE AND TIGHT. THIS MODEL HAS ROTATABLE WEAR SURFACES IN THE ARM SO SHOULD IT EVER GET WORN, YOU CAN TURN THE RODS OR JUST REPLACE THE RODS RATHER THAN THE ARM.

TRI STATE MACHINERY WOODWORKING CROSSCUT POP UP SAW. 7.5 HP 230/460V MOTOR, PNEUMATICALLY RAISES GUARD, YOU PUSH THE PAD WITH YOUR KNEE AND THE GUARD DROPS AND THE SAW BLADE PNEUMATICALLY RAISES UP THRU THE TABLE TO MAKE THE CUT, INDUSTRIAL DUTY MACHINE- EVEN THE SAW CABINET IS 1/4" THICK! NO BLADE.

USED 12 GAL TILT GAS KETTLE SET UP FOR NATURAL GAS, CONVERTIBLE TO PROPANE. ALSO REQUIRES A 115V OUTLET. WORKS GREAT.

VERY NICE SCHUNK PNEUMATIC MACHINE VISE.015-02-02-365-701 PLEASE READ BEFORE BIDDING: NO RETURNS description information above supersedes any return or condition info in the data below: BEFORE MAKING YOUR PURCHASE Contact me for freight cost (applies only to items shipped by truck freight)