lyndex-nikken for sale, brand-new and used.

You're bidding on: - New LYNDEX NIKKEN R8 COLLET 3/8" 800-024 DRAWBAR 7/16-20 MADE IN JAPAN Size (Inch) 3/8 Material Steel Drawbar Thread Size 7/16-20 TIR (Decimal Inch) 0.000700 -

LYNDEX AND NIKKEN BT-50 END MILL ADAPTERS WITH SET SCREWS, (1) EACH 1" LYNDEX, 1 1/4" NIKKEN AND 1 1/2" LYNDEX; PLEASE NOTE THAT THE 1 1/4" DOES NOT HAVE A RETENTION KNOB LISTING IS FOR THREE HOLDERS FOR ONE PRICE! Please note that I have many other BT-50 Toolholders including end mill holders, master collet holders, shell mill holders, morse taper adapters, tap holders and drill chuck adapters.

Brand new in box. Nikken Boring Bar BT40 Base holder.BT40-Q26-140 link to nikken tooling

ER16 COLLET CHUCK 3.50" PROJECTION- LYNDEX G6.3 Balanced To 18,000 RPM Features Collet Chucks TIR: <.0001" at collet face Made from nickel chrome molybdenum alloy, hardened to 55 - 58 Rc. Ground surface for perpendicular contact between retention knob and holder. AT3 or better taper contact: .0028° tolerance variation 80 to 126 millionths Drive keys milled to same depth for symmetrical body design.

ER25 COLLET CHUCK 2.50" PROJECTION- LYNDEX G6.3 Balanced To 18,000 RPM Features Collet Chucks TIR: <.0001" at collet face Made from nickel chrome molybdenum alloy, hardened to 55 - 58 Rc. Ground surface for perpendicular contact between retention knob and holder. AT3 or better taper contact: .0028° tolerance variation 80 to 126 millionths Drive keys milled to same depth for symmetrical body design.

ER16 COLLET CHUCK 2.25" PROJECTION- LYNDEX G6.3 Balanced To 18,000 RPM Features Collet Chucks TIR: <.0001" at collet face Made from nickel chrome molybdenum alloy, hardened to 55 - 58 Rc. Ground surface for perpendicular contact between retention knob and holder. AT3 or better taper contact: .0028° tolerance variation 80 to 126 millionths Drive keys milled to same depth for symmetrical body design.

3/4"CAT40 ENDMILL HOLDER 4.00" PROJECTION- LYNDE G6.3 Balanced To 15,000 RPM Features End mill inner bore T.I.R. < 0.0002". Through-spindle coolant capability.

R8 3/16" END MILL HOLDER - LYNDEX 7/16"-20 Drawbar Thread • For Bridgeport Type Mills • Hardened & Ground Features Made from high quality steel forgings. Precision ground concentric. Ground shank and hole, heat treated for durable accuracy.

5/8"CAT40 ENDMILL HOLDER 3.00" PROJECTION- LYNDE G6.3 Balanced To 15,000 RPM Features End mill inner bore T.I.R. < 0.0002". Through-spindle coolant capability.

3MM 5C ROUND COLLET - LYNDEX Hardened & Ground Features Made of highest grade steel available. Precision ground to close tolerance. TTC Runout: .001" Lyndex Nikken Runout: Up to 9mm: .0007", 10mm and up: .001" Product Specifications Item # 69-504-106 Catalog Price $36.49

New in box 6MM 5C Collet Lyndex. Closed my shop down and selling all new tooling. 6MM 5C ROUND COLLET - LYNDEX Hardened & Ground Features Made of highest grade steel available.

New in box 7/8" 5C Collet Lyndex. Closed my shop down and selling all new tooling. 7/8" 5C ROUND COLLET - LYNDEX Hardened & Ground Features Made of highest grade steel available.

ER20 SPANNER WRENCH - LYNDEX G6.3 Balanced To 18,000 RPM Features Collet Chucks TIR: <.0001" at collet face Made from nickel chrome molybdenum alloy, hardened to 55 - 58 Rc. Ground surface for perpendicular contact between retention knob and holder. AT3 or better taper contact: .0028° tolerance variation 80 to 126 millionths Drive keys milled to same depth for symmetrical body design.

1-1/4" CAT40 2" PROJ. SHELL MILL HOLDER-LYNDEX Applications For high speed applications. Features Nickel chrome molybdenum alloy body.

AFFORDABLY GET YOUR MACHINE UP TO SPEED WITH THE HISPINNER FROM LYNDEX. Northbrook, IL – Lyndex Corporation's HiSpinner toolholder is a low cost alternative to purchasing a new high-speed machine. Designed to increase spindle speed by up to five times, the HiSpinner achieves finer surface finishes and higher feed rates using existing machines.

AFFORDABLY GET YOUR MACHINE UP TO SPEED WITH THE HISPINNER FROM LYNDEX. Northbrook, IL – Lyndex Corporation's HiSpinner toolholder is a low cost alternative to purchasing a new high-speed machine. Designed to increase spindle speed by up to five times, the HiSpinner achieves finer surface finishes and higher feed rates using existing machines.

(2) LYNDEX NIKKEN BT 30 COLLETS CHUCKS BT30-SK6-90P PRE-BALANCED FOR 30,000 RPM MACHINING TIN BEARING NUT COOLANT THRU HIGH PRESSURE COLLET SYSTEM 8 DEGREE TAPER SK COLLET, DOUBLE CLAMP FORCE, AND MORE PRECISION THAN AN ER COLLET CHUCK GAGE LENGTH 3.543" BODY DIA .768" GH6 WRENCH NOT INCLUDED. CAN BE PURCHASED FOR $97.00 MORE. GOOD CONDITION.

(2) LYNDEX NIKKEN BT 30 COLLETS CHUCKS BT30-SK10-45P PRE-BALANCED FOR 30,000 RPM MACHINING TIN BEARING NUT COOLANT THRU HIGH PRESSURE COLLET SYSTEM 8 DEGREE TAPER SK COLLET, DOUBLE CLAMP FORCE, AND MORE PRECISION THAN AN ER COLLET CHUCK GAGE LENGTH 1.772" BODY DIA 1.083" GH10 WRENCH NOT INCLUDED. CAN BE PURCHASED FOR $106.00 MORE. GOOD CONDITION.