m10 nut for sale, brand-new and used.

NEW 40pc Professional Metric Tap and Die Set. Taps and dies are cutting tools used to create screw threads

NEW 80pc Professional SAE and Metric Tap and Die Set. Taps and dies are cutting tools used to create screw

EMI Power Feed Throug Filter Capacitor 250A 250VAC EPCOS B85121A 250VAC or DC 250 A cap is tested till 1700 volts weight 320 gram pre mounted plate can go of. M32 with nut feedtrough M10 connection with 2 nuts and ring , 25mm long M10 tread totall diameter 55mm 40mm high 8 mm M32 tread Shipping world wide 1 Lot contain 4pcs Insert loss filtering at 10KHz 15dB at 100KHz 35dB at 1MHz 55dB at 10MHz 65dB at 100MHz >90dB at 50 ohms

EMI Power Feed Through Filter 200A 130VAC/DC Schaffner RFI Filter FN7661-200-M10 54mm diameter 32mm thread with nut and spring ring M10 connection M27 with nuts and rings thread lenght 18mm weight 675 gram Shipping world wide 1 Lot contain 1pc

 

Auction includes the following items: Flat Washer .149 x .089 x .016", 3000 pieces, McMaster # 90945A705 Hex Nut, M10 x 1.5 x 5mm, 75 pieces, McMaster # 90695A041 Hex Nut, 10-24 x 3/8 x 5/32" H, 200 pieces, McMaster #90675A011 Hex Nut, 6-32 x 1/4 x 3/32", 70 pieces, McMaster #90760A007 Total of 3,345 pieces Selling stock of our company's un-used hardware items. UPS ground shipping

Gibraltar Step Block and Clamp Set M10 x 1.5, 58 Pc 12mm T-Slot 25mm Width Gibraltar Brand Model 04804761 Step Block and Clamp Set M10x1.5 Stud Thread 58 Piece 12mm T-Slot Size 19mm T-Slot Nut 25mm Step Block Width 80; 110; 125; 150; 175; 200mm Stud Length 24 Studs; 4 Coupling Nut; 6 Flange Nuts; 6 Serrated End Clamps; 6 Step Blocks; 6 T-Slot N

M6 M8 M10 Pressure Rivet Nut Clamp Nuts Zinc Plated 1.4mm Thickness 20Pcs

For Sale240pc Metric Nut & Bolt Assortment

M2 M2.5 M2.6 M3 M3.5 M4 M5 M6 M8 M10 Steel Hexagon Hex Nut Zinc Plated Nuts

Bollhoff P2007 air rivet nut tool sets rivet nut M4 to M10, rivet stud M5 to M8. Pulling force is controlled by set pressure. Bollhoff Rivkle P2007 Pneumatic setting tool for blind rivet nuts and studs Bollhoff P2007 product no.

304 Stainless Steel Flange Hex Lock Nuts Hexagonal Nut M3 M4 M5 M6 M8 M10 M12

The FLEX-5P tool is designed for installing Sherex threaded insert/rivet nuts. The tool utilizes a pull to pressure installation method. The advantage with this method is that the same insert can be installed into different material thicknesses (within the part grip range) without any adjustments to the tool once the proper pulling pressure has been set.

Forney 72845 Wire Wheel Brush, Industrial Pro Stringer Bead Twist Knot with M10-by-1.25/1.50 Multi Arbor, 4-Inch-by-.020-Inch

A2 A4 Stainless Steel Hex Jam Nuts Nut M1 M1.2 M1.4 M1.6 M2/M2.5/M3/M4/M5- M10Model: 304 -A2 316 A4-201- Stainless steel hex Jam NutPitch is coarse pitch .Mode of action: LockingSurface hardness: Grade 4.8Product treatment: Wi