70 pc M2 Screw & Nuts Set 70 pc miniature metric screws and nuts set Screws: Philips flat head, steel with nickel coating M2 x4 mm, x6mm, x8mm, x10mm, x12mm, 5pc each Nuts: M2x0.45 steel with nickel coating 20pc Washers:
65 pc M2.5 Screw & Nuts Set 65 pc miniature metric screws and nuts set Screws: Philips flat head, steel with nickel coating M2.5 x4 mm, x6mm, x8mm, x10mm, x12mm, 5pc each Nuts: M2.5x0.45 steel with nickel coating 20pc Washers:
150 PIECES ASSORTMENT IN PLASTIC CONTAINER CONSISTING OF CORRECT PICTURE COMING M2 THRU 8MM METRIC BRASS FLAT WASHER ASSORTMENT 25 PIECES EACH X M2 X M2.5 X M3 X M4 20 PIECES EACH X M5 X M6 15 PIECES EACH
270 PIECES ASSORTMENT IN PLASTIC CONTAINER CONSISTING OF M2 THRU 8MM STAINLESS STEEL LOCK WASHER ASSORTMENT 50 PIECES EACH X M2 X M3 X M4 25 PIECES EACH X M2.5 X M3.5 X M5 X M6 20 PIECES EACH X M8 &n
2897XA2C.05 New Stainless Steel Split Ring Lockwashers, Lock Washers, for #6 English or M3.5 Metric Machine Screws, 18-8SS Non-Magnetic, Part Number 0597-405-031. Each bid quantity is for a Box of One Hundred (100) Pieces. You may bid / buy any number of boxes, up to the total quantity available above.
Stainless Steel M2.5 M3 M4 M5 M6 Spring Washer x 20 x 50 x 100 pcs M2.5 x 4.1mm, M3 x 5mm, M4 x 6.7mm, M5 x 7.7mm, M6 x 9.6mm Please make your choice of size and quantity you can choice 20pcs, 50 pcs or 100 pcs per pack Note: Item will be shipped by Hong Kong registered air mail with tracking number provided.
Ludlum style C connectors. Used good clean condition Silver Plated High Voltage and Signal Bulkhead C Connectors for Ludlum Survey Meter, Detector, Probe, Geiger Counter. These also work on some Collins radio equipment.
LISTED IS A NEW OLD STOCK YOKE AND HARDWARE KIT FOR A MODEL 6A OR 6B TRAV- A- DIAL. THE YOKE IS TO SET THE PRELOAD ON THE M3 MOUNTING BASE. THE HARDWARE IS TO MOUNT AND ADJUST THE M3 BASE.
printosphere Visit shop Add to favourites Extruder RepRap 3D Printer Prusa Mendel i2/i3 Hardware Set EXTRUDER VITAMINS Description: All hardware required to assemble Greg's
(Blue) Makerbot Replicator 1 & 2 Extruder Upgrade, Thingomatic w/MK7 Extruder - Delrin Plunger Replacement: I had real problems using the delrin plunger system so I purchased a spring loaded extruder upgrade but still had a few problems with not having enough pressure from the spring to keep the plastic against the drive gear (slippage). I redesigned a similar upgrade and use a heavier and stiffer spring then what I originally was using.
For sale is a complete LulzBot TAZ 4 Printed Parts and Hardware Kit. This kit comes with all the plastic printed parts (ABS), and all nuts and bolts as listed in the LulzBot TAZ 4 Bill Of Materials (BOM), to build and complete your own TAZ 4 3D Printer. PLEASE NOTE (READ PACKAGE LIST BELOW) This kit ONLY includes the plastic printed parts and hardware (nuts, bolts and everything else mentioned in the “Hardware” section of the TAZ BOM).
(Red) Makerbot Replicator 1 & 2 Extruder Upgrade, Thingomatic w/MK7 Extruder - Delrin Plunger Replacement: I had real problems using the delrin plunger system so I purchased a spring loaded extruder upgrade but still had a few problems with not having enough pressure from the spring to keep the plastic against the drive gear (slippage). I redesigned a similar upgrade and use a heavier and stiffer spring then what I originally was using.
(2) (Left and Right) (Red) Makerbot Replicator 1 & 2 Dual Extruder Upgrade, Thingomatic w/MK7 Extruder - Delrin Plunger Replacement:I had real problems using the delrin plunger system so I purchased a spring loaded extruder upgrade but still had a few problems with not having enough pressure from the spring to keep the plastic against the drive gear (slippage). I redesigned a similar upgrade and use a heavier and stiffer spring then what I originally was using.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.