machinist clamps for sale, brand-new and used.

(2) STEEL PARALLEL CLAMPS / TOOLMAKERS CLAMPS / MACHINIST CLAMPS, 5"x3/4"x3/4" and 4"x9/16"x9/16" WORKHOLDING VISES/VICES TOOL MAKER HAND TOOLS Used and in very good condition. Steel Machinist Clamps / Parallel Clamps / Tool Maker's Clamps Tools, 5" x 3/4" x 3/4" and 4" x 9/16" x 9/16". Note that this 5" toolmaker's clamp has a rare, antique type handle on one of its screws and a square drive on the other screw - very useful and a great tool collectible / clamp collectible.

LOT OF 6 MACHINIST, LATHE FACE PLATE, WORK HOLDING CLAMPS TE-CO 30910 5" x 1-1/4" x 5/8" 3/8-16 tapped hole These clamps were rarely used and are in excellent condition Any questions please ask I ship to the USA only I only accept PayPal Thanks for looking

12" STEEL MACHINIST BLOCK / MACHINIST PLATE TOOL CLAMP PLATE: DISPLAYING, MACHINING, PAINTING, DRYING New old stock (NOS). 12" diameter sturdy Steel Machinist Block / Machinist Plate Clamp Tool Plate for displaying, machining, crafting, painting, and drying objects. Drilled holes are 1/4" diameter, and in a critically important radial pattern from the center, with a center hole.

(2) PARALLEL BARS SET, RAILS, WORKHOLDING STEEL MACHINIST BLOCKS / MACHINIST TOOLS / WEIGHTS Used and in very good condition; some minor surface rust and scratches. Very versatile pair of Workholding Parallel Machinist Bar Assemblies, Steel Machinist Tools. Each bar assembly weighs about 10 lbs.

Vintage Machinist Black V-Block CLAMPS ~ Matched Pair Unmarked by any maker 1) 2.189 Bottom Opening 2) 2.200 Bottom Opening The opening is bigger once past the bottom of the clamps as you can see in the photos Used Set in Very Good Condition and ready to use! The previous owner's name is scribed on the sides of these See photos at the top of this page for more details

For auction two L.S. Starrett machinist tools - A No. 20 three inch precision machinist square from L.

AUCTION IS FOR 4 CLAMPS THE 2 LARGE ONES ARE ECLIPSE MADE IN ENGLAND I AM NOT A MACHINIST THESE WERE MY FATHER IN-LAWS TOOLS Items are described to the best of my knowledge. However, I make no guarantees as to accuracy or calibration of any item sold. All items should be calibrated/checked by purchaser prior to being used.

Up for bid is two machinist clamps, one is a Brown & Sharpe and the other might be home made, nicely done. The tighten bolt on the Brown & Sharpe is worn on the end. Please look at all the pictures for a complete view of their condition.

These antique clamps are from the estate of a former machinist, who used to build anything. Machines, ships, airplanes, motorcycles, race cars. These would make a great display set.

Large Set of parallel clamps, good working condition, the knurling is worn on the screws but they work fine. Jaws are made of 3/4" square stock, very heavy duty. Came from retired machinist,Unknown Manufacturer.

Up for bid 5 machinist clamps finely hand crafted 3 have nylon clamp surfaces with knurled knobs and open to 1-1/2" and a 1-1/2" throat depth, 2 are heat treated and open to 3-1/2" and have a 2-1/4" throat; they weight up at 7-1/2 pounds all together;

PLEASE SEE MY OTHER AUCTIONS FOR A LARGE SELECTION MACHINIST ITEMS, I WILL COMBINE SHIPPING. I think they are clamps. .

Lot of Machinist Parallel Clamps 1 - Armstrong No. 12 1 Unmarked Clamp smaller 3" Clamp 6 Jaws 4 Screws Approx. 4" Long Thank you for looking and Happy Bidding!

You are bidding on a lot of 5 Vintage Machinist / Toolmaker Clamps.Three are Parallel Clamps, two are Hold Down Clamps.One of the Parallel Clamps is marked L.S. Starrett, the others have no Brand markings.Please check photos for a more precise description.

4 machinist parallel clamps for same price. All are the same size, total length is 4-7/8" they open to 2-1/4"; depth is 2-5/8", jaw width is 5/8". All work well.

6 machinist clamps for same price. All are the same size, they open to 2-1/8"; depth is 2-1/4" total height is 3-1/8". All work well.

These are a home made set of parallel machinist clamps. They are NOT starrett. That is in the listing to give an idea of size and what they are.

I spent 30 years as a Special Machine Builder and Machinist. I retired from the tooling trade over 20 years ago so the time has come to pass along my precision tools and tooling to someone who has a use for them. For sale is my 30 year collection of V-Blocks in various sizes.

3 Vintage Starrett No.161A machinist parallel clamps 2 are in very good condition one has some pit but still works fine ...Check the photos for condition and email me with any questions, I will do my best to be of help..Good Luck.. Richy