+ Post new Ad
Machinist Hardened V-Block With Clamp, US $180 – Picture 0
Machinist Hardened V-Block With Clamp, US $180 – Picture 0

Machinist Hardened V-block With Clamp

US $180

  • Wheatland, Pennsylvania, United States
  • May 25th
Open on mobile:
QR code
 You are bidding on a Machinist  hardened V-Block with clamp.. The base of the v-block measures 3 3/8" long." The block is 1 7/8" high by 1 7/8" wide. The actual V work holding area measures 1 1/8" across the V by 2 3/16" long. This was made in the seventies by a master toolmaker, hardly used in great condition. It does have  6 or 7 marks along the top (as you might be able to see in pictures #2, #3 and #7 picture). where he accidentally rapid traversed a cutting tool which do not look more than .010 or .012 deep.  thanks for looking, I have other tools  in which I can ship more than one at a cheaper rate, so watch for my other tools. Email me if you have questions.

Directions

Similar products from Supporting Blocks & Sets

MILLS FOR SHERLINE MILL 1/8" - 3/16" AND 1/4" MADE IN THE UK

MILLS FOR SHERLINE MILL 1/8" - 3/16" AND 1/4" MADE IN THE UK

  • West Orange, New Jersey, United States
  • May 25th
Norton Diamond Multi point Wheel Dresser - DP-35 04/16 New LAST ONES FOR AWHILE

Norton Diamond Multi point Wheel Dresser - DP-35 04/16 New LAST ONES FOR AWHILE

  • Martinsville, Indiana, United States
  • May 25th
Norton Diamond Point Grinding Wheel Dresser SG2M7 NEW LAST ONE FOR AWHILE

Norton Diamond Point Grinding Wheel Dresser SG2M7 NEW LAST ONE FOR AWHILE

  • Martinsville, Indiana, United States
  • May 25th
Norton Diamond Point Grinding Wheel Dresser BCSG2M7 NEW THESE ARE THE LAST ONES

Norton Diamond Point Grinding Wheel Dresser BCSG2M7 NEW THESE ARE THE LAST ONES

  • Martinsville, Indiana, United States
  • May 25th
Norton Diamond Point Grinding Wheel Dresser NS5M7 NEW THIS IS THE LAST ONE

Norton Diamond Point Grinding Wheel Dresser NS5M7 NEW THIS IS THE LAST ONE

  • Martinsville, Indiana, United States
  • May 25th
machinist tools Lot/ Mill Lathe Toolmaker/ Large U Block Knee Fixture, Set Up

machinist tools Lot/ Mill Lathe Toolmaker/ Large U Block Knee Fixture, Set Up

  • Sebastopol, California, United States
  • May 25th
MACHINIST TOOLS LATHE MILL Machinist Lot of Hold Down Blocks Some Step Blocks

MACHINIST TOOLS LATHE MILL Machinist Lot of Hold Down Blocks Some Step Blocks

  • Morris Plains, New Jersey, United States
  • May 25th
machinist tools Lot/ Mill Lathe Toolmaker/R8 Face Mill,love Joy Made In USA. Sho

machinist tools Lot/ Mill Lathe Toolmaker/R8 Face Mill,love Joy Made In USA. Sho

  • Sebastopol, California, United States
  • May 25th
Heinrich 3-VB Grip-Master V-Block Attachment - For Model - 3-SV & 3-TS

Heinrich 3-VB Grip-Master V-Block Attachment - For Model - 3-SV & 3-TS

  • Duncan, South Carolina, United States
  • May 25th
Milling Machine Setup Step Blocks Drill Jig Bore

Milling Machine Setup Step Blocks Drill Jig Bore

  • Clinton Township, Michigan, United States
  • May 25th
Machinist Toolmaker V-BLOCK Fishtail Large 7 Pounds Grinder Toolroom SUPERB

Machinist Toolmaker V-BLOCK Fishtail Large 7 Pounds Grinder Toolroom SUPERB

  • East Lansing, Michigan, United States
  • May 25th
machinist tools Lot/ Mill Lathe Toolmaker/Milling Cutter,horizontal Mill, Arbor

machinist tools Lot/ Mill Lathe Toolmaker/Milling Cutter,horizontal Mill, Arbor

  • Sebastopol, California, United States
  • May 25th
Vintage Unbranded Miscellaneous 12 Pc Steel Plug Pin Gage Machinst Tools

Vintage Unbranded Miscellaneous 12 Pc Steel Plug Pin Gage Machinst Tools

  • Tampa, Florida, United States
  • May 25th
steel brass alluminum magnet milling 4x2x1 123 blocking

steel brass alluminum magnet milling 4x2x1 123 blocking

  • Stoneboro, Pennsylvania, United States
  • May 25th
ANTON MACH. WKS. BKLYN. N.Y. Precision Ground Parallels 22 Pair Set

ANTON MACH. WKS. BKLYN. N.Y. Precision Ground Parallels 22 Pair Set

  • Chalfont, Pennsylvania, United States
  • May 25th
Vintage Lufkin No. 905 V Blocks and Clamps in Original Box

Vintage Lufkin No. 905 V Blocks and Clamps in Original Box

  • Indian Trail, North Carolina, United States
  • May 25th
Machinist Tool Makers Taft Pierce V Block & Clamp set of 3

Machinist Tool Makers Taft Pierce V Block & Clamp set of 3

  • Tucson, Arizona, United States
  • May 25th
Magnetic Machinist V Block 231

Magnetic Machinist V Block 231

  • Spencer, Indiana, United States
  • May 25th
MACHINIST penn tool co. FISHTAIL V-BLOCK 3.5x1 7/8x1 7/8 with clamp

MACHINIST penn tool co. FISHTAIL V-BLOCK 3.5x1 7/8x1 7/8 with clamp

  • Hadley, Pennsylvania, United States
  • May 25th
machinist toolmaker grinding set up pair of v'blocks 2x2.5x2.75 with clamps

machinist toolmaker grinding set up pair of v'blocks 2x2.5x2.75 with clamps

  • Hadley, Pennsylvania, United States
  • May 25th

People who viewed this item also vieved

HARDINGE Tool Holder CC-21-3/4_ CC21 _with 1/4 Bushing CNC Turret block

HARDINGE Tool Holder CC-21-3/4_ CC21 _with 1/4 Bushing CNC Turret block

  • Grand Rapids, Michigan, United States
  • Feb 14th
ER16 PRECISION COLLET 11/32" CHRAFTSMAN IND.

ER16 PRECISION COLLET 11/32" CHRAFTSMAN IND.

  • Meridian, Idaho, United States
  • Feb 14th
HARDINGE Tool Holder CC-21-3/4_ CC21 _with 3/16 Bushing CNC Turret Lathe

HARDINGE Tool Holder CC-21-3/4_ CC21 _with 3/16 Bushing CNC Turret Lathe

  • Grand Rapids, Michigan, United States
  • Feb 14th
18" x 13" Steel Welding T-Slotted Table Cast iron Layout Plate T-Slot Weld Jig

18" x 13" Steel Welding T-Slotted Table Cast iron Layout Plate T-Slot Weld Jig

  • Grand Rapids, Michigan, United States
  • Feb 17th
36" x 16" Steel Welding T-Slotted Table Cast iron Layout Plate T-Slot Weld

36" x 16" Steel Welding T-Slotted Table Cast iron Layout Plate T-Slot Weld

  • Grand Rapids, Michigan, United States
  • Feb 17th
NEW HHIP 3402-1031 3-3/4 x 4 x 5 Inch Non-Slotted Right Angle Plate

NEW HHIP 3402-1031 3-3/4 x 4 x 5 Inch Non-Slotted Right Angle Plate

  • United States
  • Feb 17th
DE-STA-CO 640 Toggle Clamp, Straight Line, 7500 Lbs

DE-STA-CO 640 Toggle Clamp, Straight Line, 7500 Lbs

  • Louisville, Kentucky, United States
  • Feb 24th
Five 3" malleable clamps U. S. A.

Five 3" malleable clamps U. S. A.

  • Cedar Rapids, Iowa, United States
  • Feb 24th
DE-STA-CO 601 Forward Action Straight-Line Toggle Clamps 10 pcs

DE-STA-CO 601 Forward Action Straight-Line Toggle Clamps 10 pcs

  • Montebello, California, United States
  • Feb 24th
TE-CO TOOLEX 6" RELOCK DOUBLE STATION CNC VISE BODY

TE-CO TOOLEX 6" RELOCK DOUBLE STATION CNC VISE BODY

  • Minneapolis, Minnesota, United States
  • Feb 24th
150 Lbs Power Table Feed Central Machinery Milling Machine 38946

150 Lbs Power Table Feed Central Machinery Milling Machine 38946

  • Pottsville, Pennsylvania, United States
  • Feb 24th
NEW 3" GRINDING VISE IN WOOD BOX , MACHINIST TOOL MAKER B&G

NEW 3" GRINDING VISE IN WOOD BOX , MACHINIST TOOL MAKER B&G

  • East Greenwich, Rhode Island, United States
  • Feb 24th
MADISON 4399-152-00012 CENTER POINT (AA3152-1)

MADISON 4399-152-00012 CENTER POINT (AA3152-1)

  • Miami, Florida, United States
  • Feb 25th
MADISON 4399-152-00010 CENTER POINT (AA3149-1)

MADISON 4399-152-00010 CENTER POINT (AA3149-1)

  • Miami, Florida, United States
  • Feb 25th
Woodwoker's VISE MANUFACTURED BY FOOTPRINT NO.34 SHEFFIELD England

Woodwoker's VISE MANUFACTURED BY FOOTPRINT NO.34 SHEFFIELD England

  • Richmond Hill, Ontario, Canada
  • Feb 27th
CNC Machine chuck

CNC Machine chuck

  • Newberry, South Carolina, United States
  • Feb 27th
BUCK 6" SIX-JAW ADJUST TRU LATHE CHUCK - PLAIN BACK - LOGAN - #4761

BUCK 6" SIX-JAW ADJUST TRU LATHE CHUCK - PLAIN BACK - LOGAN - #4761

  • Dunlap, Illinois, United States
  • Feb 27th
4''/100mm R8 Precision Lathe Chuck, 3-Jaw Self Centering Scroll, #0225-0237

4''/100mm R8 Precision Lathe Chuck, 3-Jaw Self Centering Scroll, #0225-0237

  • TORONTO, ONTARIO, Canada
  • Feb 27th
EXCELLENT 1/2" VULCAN NO. 2 DRIVER DOG LATHE TOOL 4 LATHE MACHINIST

EXCELLENT 1/2" VULCAN NO. 2 DRIVER DOG LATHE TOOL 4 LATHE MACHINIST

  • United States
  • Mar 29th
Original South Bend Lathe Model 9 A Large Dial Compound feed Screw

Original South Bend Lathe Model 9 A Large Dial Compound feed Screw

  • Haverhill, Massachusetts, United States
  • Mar 29th
Original South Bend Lathe Model 9 A Large Dial Cross feed Screw

Original South Bend Lathe Model 9 A Large Dial Cross feed Screw

  • Haverhill, Massachusetts, United States
  • Mar 29th
PRECISION ROTO - GRIND 7" ROTARY GRINDING TABLE

PRECISION ROTO - GRIND 7" ROTARY GRINDING TABLE

  • Lombard, Illinois, United States
  • May 25th
BRIDGEPORT VERTICAL MILL W/ TROYKE BRIDGEPORT ROTARY TABLE W/ 3 JAW BUCK CHUCK

BRIDGEPORT VERTICAL MILL W/ TROYKE BRIDGEPORT ROTARY TABLE W/ 3 JAW BUCK CHUCK

  • Hopkins, Minnesota, United States
  • May 25th
MINT WALTER DAPRA RTS320G PRECISION 12.5" TILT ROTARY INDEX TABLE ZERO BACKLASH

MINT WALTER DAPRA RTS320G PRECISION 12.5" TILT ROTARY INDEX TABLE ZERO BACKLASH

  • Richmond Hill, Ontario, Canada
  • May 25th
KENNAMETAL STRAIGHT SHANK DA COLLET CHUCK SS100DA1886838 USES 180DA COLLET NEW

KENNAMETAL STRAIGHT SHANK DA COLLET CHUCK SS100DA1886838 USES 180DA COLLET NEW

  • Novelty, Ohio, United States
  • May 29th
MACHINIST TOOLS * 5C COLLET BLOCK * HEX * CLOSER * CHUCK

MACHINIST TOOLS * 5C COLLET BLOCK * HEX * CLOSER * CHUCK

  • Camarillo, California, United States
  • May 29th
HARDINGE 16C 3" EXTRA DEPTH CHUCK CLOSER STK 7993

HARDINGE 16C 3" EXTRA DEPTH CHUCK CLOSER STK 7993

  • Wadley, Alabama, United States
  • May 29th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies