+ Post new Ad
Machinist Knee 6"X8"X6" Cast Iron Knee SOUTH BEND Mich USA VOCATIONAL ED 24 PDS., US $1000 – Picture 0
Machinist Knee 6"X8"X6" Cast Iron Knee SOUTH BEND Mich USA VOCATIONAL ED 24 PDS., US $1000 – Picture 1
Machinist Knee 6"X8"X6" Cast Iron Knee SOUTH BEND Mich USA VOCATIONAL ED 24 PDS., US $1000 – Picture 2
Machinist Knee 6"X8"X6" Cast Iron Knee SOUTH BEND Mich USA VOCATIONAL ED 24 PDS., US $1000 – Picture 3
Machinist Knee 6"X8"X6" Cast Iron Knee SOUTH BEND Mich USA VOCATIONAL ED 24 PDS., US $1000 – Picture 4
Machinist Knee 6"X8"X6" Cast Iron Knee SOUTH BEND Mich USA VOCATIONAL ED 24 PDS., US $1000 – Picture 5
Machinist Knee 6"X8"X6" Cast Iron Knee SOUTH BEND Mich USA VOCATIONAL ED 24 PDS., US $1000 – Picture 6
Machinist Knee 6"X8"X6" Cast Iron Knee SOUTH BEND Mich USA VOCATIONAL ED 24 PDS., US $1000 – Picture 7
Machinist Knee 6"X8"X6" Cast Iron Knee SOUTH BEND Mich USA VOCATIONAL ED 24 PDS., US $1000 – Picture 8
Machinist Knee 6"X8"X6" Cast Iron Knee SOUTH BEND Mich USA VOCATIONAL ED 24 PDS., US $1000 – Picture 9
Machinist Knee 6"X8"X6" Cast Iron Knee SOUTH BEND Mich USA VOCATIONAL ED 24 PDS., US $1000 – Picture 0
Machinist Knee 6"X8"X6" Cast Iron Knee SOUTH BEND Mich USA VOCATIONAL ED 24 PDS., US $1000 – Picture 1
Machinist Knee 6"X8"X6" Cast Iron Knee SOUTH BEND Mich USA VOCATIONAL ED 24 PDS., US $1000 – Picture 2
Machinist Knee 6"X8"X6" Cast Iron Knee SOUTH BEND Mich USA VOCATIONAL ED 24 PDS., US $1000 – Picture 3
Machinist Knee 6"X8"X6" Cast Iron Knee SOUTH BEND Mich USA VOCATIONAL ED 24 PDS., US $1000 – Picture 4
Machinist Knee 6"X8"X6" Cast Iron Knee SOUTH BEND Mich USA VOCATIONAL ED 24 PDS., US $1000 – Picture 5
Machinist Knee 6"X8"X6" Cast Iron Knee SOUTH BEND Mich USA VOCATIONAL ED 24 PDS., US $1000 – Picture 6
Machinist Knee 6"X8"X6" Cast Iron Knee SOUTH BEND Mich USA VOCATIONAL ED 24 PDS., US $1000 – Picture 7
Machinist Knee 6"X8"X6" Cast Iron Knee SOUTH BEND Mich USA VOCATIONAL ED 24 PDS., US $1000 – Picture 8
Machinist Knee 6"X8"X6" Cast Iron Knee SOUTH BEND Mich USA VOCATIONAL ED 24 PDS., US $1000 – Picture 9

Machinist Knee 6"x8"x6" Cast Iron Knee South Bend Mich Usa Vocational Ed 24 Pds.

US $1000

  • Sodus, Michigan, United States
  • Jan 30th
Open on mobile:
QR code
6"x8"x6" MACHINIST KNEE STAMPED PATT. 21-A VOCAT'L ED MICH ST. B'D WEIGHT IS 24 POUNDS VERY SOLID AND HEAVY DUTY..well built NO CRACKS OR BREAKS ANY QUESTIONS PLEASE ASK THANK YOU FOR LOOKING CHECK OUT OTHER RARE ITEMS. . VERY OLD AND RARE MODEL
Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...
Manufacturer not sure
Brand Challenge Machinery Co.
Country/Region of Manufacture United States
Model PATT.21-A

Directions

Similar products from Fittings & Plates

Cast Iron Knees - Matched Pair (Inv.21392)

Cast Iron Knees - Matched Pair (Inv.21392)

  • Portland, Connecticut, United States
  • Jan 30th
HTS Miniature Drilling Fixture

HTS Miniature Drilling Fixture

  • Portland, Connecticut, United States
  • Jan 30th
Ralmike Motorized Grinding Fixture (Inv.21614)

Ralmike Motorized Grinding Fixture (Inv.21614)

  • Portland, Connecticut, United States
  • Jan 30th
Machinist Sine Plate 6" x 2 7/8" x 1 3/4"

Machinist Sine Plate 6" x 2 7/8" x 1 3/4"

  • East Longmeadow, Massachusetts, United States
  • Jan 30th
Vintage machinist parallels, 10 sets of two see description for size

Vintage machinist parallels, 10 sets of two see description for size

  • Wanaque, New Jersey, United States
  • Jan 30th
MACHINIST/MINI LATHE Small Face Plate 3" with 9/16 X16 Threads

MACHINIST/MINI LATHE Small Face Plate 3" with 9/16 X16 Threads

  • Shasta Lake, California, United States
  • Jan 30th
39.5" x 39.5" CINCINNATI T-40 HMC PALLET STEEL T-SLOT TABLE, 7 SLOT_TSLOT

39.5" x 39.5" CINCINNATI T-40 HMC PALLET STEEL T-SLOT TABLE, 7 SLOT_TSLOT

  • Grand Rapids, Michigan, United States
  • Jan 30th
61" x 9.5" x 2" STEEL T-SLOT TABLE, 4 SLOT_TSLOT

61" x 9.5" x 2" STEEL T-SLOT TABLE, 4 SLOT_TSLOT

  • Grand Rapids, Michigan, United States
  • Jan 30th
Phase II 226-212 Swivel Angle Plate, 8" x 10" Table, 6-1/2" Height, 0-90° Range

Phase II 226-212 Swivel Angle Plate, 8" x 10" Table, 6-1/2" Height, 0-90° Range

  • Saint Louis, Missouri, United States
  • Jan 30th
CLEAN!! PRECISION SINE PLATE 18" X 9" CNC MACHINIST FIXTURING BORING GRINDING

CLEAN!! PRECISION SINE PLATE 18" X 9" CNC MACHINIST FIXTURING BORING GRINDING

  • Chino, California, United States
  • Jan 30th
Angle Plate Cast Steel See Desc. & Pic’s V.G.C.++

Angle Plate Cast Steel See Desc. & Pic’s V.G.C.++

  • Rome, New York, United States
  • Jan 30th
4 MILLING MACHINE TABLE CLAMPS step boring mill work holder tool 4" long & STUDS

4 MILLING MACHINE TABLE CLAMPS step boring mill work holder tool 4" long & STUDS

  • Milroy, Indiana, United States
  • Jan 30th
MACHINIST TOOLS LATHE MILL Machinist Hold Down Set Up Fixture

MACHINIST TOOLS LATHE MILL Machinist Hold Down Set Up Fixture

  • Morris Plains, New Jersey, United States
  • Jan 30th
SET OF INDEXING MASKING PLATES FOR SUPER SPACERS 6-3/4" DIA.

SET OF INDEXING MASKING PLATES FOR SUPER SPACERS 6-3/4" DIA.

  • Ellington, New York, United States
  • Jan 30th
Applied Robotics Adapter XC50.1SGR-16-R-5VN-NP-S805 New

Applied Robotics Adapter XC50.1SGR-16-R-5VN-NP-S805 New

  • Novi, Michigan, United States
  • Jan 30th
Precision ER16 Series Spring Collets 1/32-3/8" 10PC Set

Precision ER16 Series Spring Collets 1/32-3/8" 10PC Set

  • Ontario, California, United States
  • Jan 30th
National Acme TH-959070 Cross Slide Base

National Acme TH-959070 Cross Slide Base

  • Peoria, Illinois, United States
  • Jan 30th
Clamp Fixture for CNC Milling Table with Air Cylinder

Clamp Fixture for CNC Milling Table with Air Cylinder

  • Newton, New Jersey, United States
  • Jan 30th
SNAP-TIGHT LUBRICATOR PART SUBPLATE PDT-01-2P NEW

SNAP-TIGHT LUBRICATOR PART SUBPLATE PDT-01-2P NEW

  • Clover, South Carolina, United States
  • Jan 30th
MetKlamp V Vises

MetKlamp V Vises

  • Portland, Connecticut, United States
  • Jan 30th

People who viewed this item also vieved

ASSORTED MORSE TAPER COLLETS QTY22

ASSORTED MORSE TAPER COLLETS QTY22

  • Lake Villa, Illinois, United States
  • Feb 28th
Clausing 4900 series lathe 4C collet closer

Clausing 4900 series lathe 4C collet closer

  • Baltimore, Maryland, United States
  • Feb 28th
LOT OF 2 MISC B & O COLLETS , 5/8" ( 5-36 ) & 1/4" ( 10-35 )

LOT OF 2 MISC B & O COLLETS , 5/8" ( 5-36 ) & 1/4" ( 10-35 )

  • Port Richey, Florida, United States
  • Feb 28th
GP of 2 J H WILLIAMS &CO VULCAN TOOL 204 MAKERS CLAMP

GP of 2 J H WILLIAMS &CO VULCAN TOOL 204 MAKERS CLAMP

  • Ruskin, Florida, United States
  • Mar 5th
Die/Machinge setup spacer/washer

Die/Machinge setup spacer/washer

  • Scottsboro, Alabama, United States
  • Mar 5th
Armstrong No. 404 C Clamp Heavy Duty Drop Forged Mechanic Welding

Armstrong No. 404 C Clamp Heavy Duty Drop Forged Mechanic Welding

  • Colorado Springs, Colorado, United States
  • Mar 5th
Craftsman #9-21407 4" 3 Jaw Metal Lathe Chuck 1" x 10 Thread

Craftsman #9-21407 4" 3 Jaw Metal Lathe Chuck 1" x 10 Thread

  • Brooklyn, Maryland, United States
  • Mar 6th
BROWN & SHARPE MAGNETIC CHUCK

BROWN & SHARPE MAGNETIC CHUCK

  • Stratford, Connecticut, United States
  • Mar 6th
4" Lathe Face Plate, Aluminum, 3/4"-16 Threaded for Easy Wood Bowl Turning New

4" Lathe Face Plate, Aluminum, 3/4"-16 Threaded for Easy Wood Bowl Turning New

  • Jacksonville, Florida, United States
  • Mar 6th
MELIN HSS Cobalt 1/2" x 1/2" 4 Flute S/E Long End Mill

MELIN HSS Cobalt 1/2" x 1/2" 4 Flute S/E Long End Mill

  • Johnson City, New York, United States
  • Mar 6th
MELIN HSS Cobalt 1/2" x 1/2" 4 Flute D/E End Mill

MELIN HSS Cobalt 1/2" x 1/2" 4 Flute D/E End Mill

  • Johnson City, New York, United States
  • Mar 6th
MELIN HSS Cobalt 1/2" x 1/2" 2 Flute D/E End Mill

MELIN HSS Cobalt 1/2" x 1/2" 2 Flute D/E End Mill

  • Johnson City, New York, United States
  • Mar 6th
MT5 LIVE ROLLING CENTER CNC LATHE

MT5 LIVE ROLLING CENTER CNC LATHE

  • Gurley, Alabama, United States
  • Mar 25th
USED ROYAL CARBIDE TIPPED CENTER P/N 11014 #2MT

USED ROYAL CARBIDE TIPPED CENTER P/N 11014 #2MT

  • San Bernardino, California, United States
  • Mar 25th
# 6 Jarno Taper Solid Lathe (Dead) Center - Carbon Steel

# 6 Jarno Taper Solid Lathe (Dead) Center - Carbon Steel

  • South Hackensack, New Jersey, United States
  • Mar 25th
Steel Tee plate fixtures for 400 MM HMC's

Steel Tee plate fixtures for 400 MM HMC's

  • Mark, Illinois, United States
  • May 24th
South Bend Metal Lathe Stand Legs *As In Photos*

South Bend Metal Lathe Stand Legs *As In Photos*

  • Garwood, New Jersey, United States
  • May 24th
Okuma lathe CNC LU15 OSP-U100L year 2000, great machine under power, VIDEO

Okuma lathe CNC LU15 OSP-U100L year 2000, great machine under power, VIDEO

  • Warren, Michigan, United States
  • May 24th
Interstate 5" Cross Travel x 5 Inch Longitudinal Travel, Slide Machining Table

Interstate 5" Cross Travel x 5 Inch Longitudinal Travel, Slide Machining Table

  • Punta Gorda, Florida, United States
  • May 29th
YUASA DNMC-280 CNC ROTARY TABLE W/ TAILSTOCK

YUASA DNMC-280 CNC ROTARY TABLE W/ TAILSTOCK

  • Huntley, Illinois, United States
  • May 29th
Haas head

Haas head

  • Jackson, Michigan, United States
  • May 29th
MILLING CORNER BLOCK - 5" BY 2"

MILLING CORNER BLOCK - 5" BY 2"

  • Newbury, Ohio, United States
  • May 29th
THREE SETS OF 6" MACHINIST PARALLELS

THREE SETS OF 6" MACHINIST PARALLELS

  • Newbury, Ohio, United States
  • May 29th
Pair of V-Blocks with clamps & extra clamp screws

Pair of V-Blocks with clamps & extra clamp screws

  • Utica, Michigan, United States
  • May 29th
22 Pc. Techniks CAT 40 ER 32-4" CNC Chucks Kit-18 x Coolant Collet Set,Wrench

22 Pc. Techniks CAT 40 ER 32-4" CNC Chucks Kit-18 x Coolant Collet Set,Wrench

  • Hamden, Connecticut, United States
  • Jun 3rd
22 Pc. Techniks CAT 40 ER 32-4.0" CNC Collet Chucks Kit-18 x Collet Set, Wrench

22 Pc. Techniks CAT 40 ER 32-4.0" CNC Collet Chucks Kit-18 x Collet Set, Wrench

  • Hamden, Connecticut, United States
  • Jun 3rd
3 Pc. Techniks CAT 40 ER 32-4.00" 25K RPM @G2.5 Balanced CNC Collet Chucks Kit

3 Pc. Techniks CAT 40 ER 32-4.00" 25K RPM @G2.5 Balanced CNC Collet Chucks Kit

  • Hamden, Connecticut, United States
  • Jun 3rd

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies