mortise cylinder for sale, brand-new and used.

This low-cost, self-contained door alarm easily installs with ordinary tools. Its patented plastic template allows for accurate installation and foolproof alignment of internal magnetic door contacts. Also simplifying installation is its tapered cover, which allows for installation on narrow stile doors (2-inch minimum).

In working condition Mortise cylinder with key 26D Mounting screws and face plate Emergency deadbolt release Schlage L9453 L-Series Commercial Grade 1 Mortise Keyed Entry Single Cylinder Entrance Lock Door Lever Set with Deadbolt

Sargent LA Keyway 1 1/8" US26D Mortise Cylinder Pair Sargent LA keyway 1 1/8" length mortise cylinder pair. Satin aluminum US26D finish cylinders with offset Sargent cams. These locks were ordered for a large building job that was cancelled and the locks were never used.

UP FOR SALE IS ONE (1) SCHLAGE L462P-626 JOB LEFTOVER FUNCTION SINGLE CYLINDER SMALL CASE MORTISE LOCKSET FINISH US26D KEYWAY C DOUBLE CYLINDER FUNCTION WILL SHIP USPS OR UPS (INSURED) OUR CHOICE Schlage - L462P US26D Do

The Von Duprin ALK battery alarm kit is a simple yet effective way to deter unauthorized use of an opening. While the exit device is still a means of egress, the ALK kit contains an internal horn. When the touch bar is depressed, the horn sounds to provide an audible means of signaling that the opening has been violated.

Up for sale is (1) Arrow mortise cylinder in satin chrome finish and "A" keyway.  Some of these have been masterkeyed, but never installed.  Some come with one key, and others with 2.  Any questions, please ask!

This Set has various sizes of USED Vintage MORTISE CYLINDER Spacing Collars (8) / Screws (4) / Cam (1). Spacing Collars are used to fill in a space between the Mortise Cylinder and the door it is installed in. Some Spacing Collars are Hardened so they spin around and to prevent someone with a tool or wrench from being able to twist the Mortise Cylinder off.

Corbin mortise cylinder in satin bronze finish and 59A2 keyway.  Any questions, please ask!  Thanks for looking!

For sale one silver medeco original mortise cylinder lock body. NO pins. NO keys.

For sale one brass 5-pin medeco original mortise cylinder lock. Included is one key that fits the plug but does not work with the lock. All five chambers contain medeco pins.

You are bidding on the items you see in the pictures so please look carefully. You will be receiving: 1 1 1/8" Mortise Cylinder with L cam for Schlage Mortise Lock Stamped with the Schlage logo 2~Keys stamped with the Schlage logo 1~Compression Spring 1~Cylinder Collar I have 4 available at this listing. Thanks for looking!!

This is a NEW and Unused Brass MORTISE CYLINDER by ILCO UNICAN / (Made in U.S.A.). The Length is 1" and the Keyway is a THUMBTURN (No Keys) and the Finish is Duronotic (Dura). The box it comes in has some very minor shelf wear and tape on the bottom to keep it from opening, but the Cylinder is NEW and Unused.

This is a NEW and UNUSED Brass MORTISE CYLINDER by ILCO UNICAN / (Made in U.S.A.). The Length is 1 1/4" and the Keyway is a THUMBTURN (No Keys) and the Finish is Chrome (26D). The CYLINDER has a very small knick and scratch on the front, near the top middle, but the CYLINDER is NEW and UNUSED.

ILCO Brass Mortise Cylinder / 1" Length / DUMMY / Finish - Polished Brass (03). This is a NEW and UNUSED Brass MORTISE CYLINDER by Ilco Unican / (Made in U.S.A.) The Length is 1" and this is a DUMMY Lock (which has no keyway), and the Finish is Polished Brass (03). The box it comes in has a good amount of shelf wear and a sticker imprint on top of the box, but the Cylinder is NEW and UNUSED, and still has the protective cover over the front to keep from being scratched.

This is an NEW and Unused Brass MORTISE CYLINDER by ILCO UNICAN / (Made in U.S.A.). The Length is 1 1/8" and the Keyway is XE (Dexter / DE6) and the Finish is Chrome (26D). The Cylinder comes with 4 Original Keys.

This is an NEW and Unused Brass MORTISE CYLINDER by LORI / (Made in U.S.A.). The Length is 1 1/8" and the Keyway is Schlage (SH1 / 5SH1) and the Finish is Chrome (US26). The Cylinder comes with 2 Original Keys (some tarnish on them) and 1 Duplicate (Star - 5SH1) Key (some tarnish on it).

This is a NEW and Unused DUMMY Brass MORTISE CYLINDER Lock with Spacing Collar. The Length is 1" and the Finish is US26 (Chrome). This type of Lock is a replacement to cover the hole of an existing Mortise Cylinder with a Keyway or a Thumbturn.

This is a NEW and Unused DUMMY Brass MORTISE CYLINDER by ILCO UNICAN / (Made in U.S.A.). The Length is 1 1 /8" and the Keyway is DUMMY and the Finish is Polished Brass (03). This type of Lock is a replacement to cover the hole of an existing Mortise Cylinder with a Keyway or a Thumbturn.

This is a new tool to tighten the threaded mortise cylinder ring in Falcon or Von Duprin exit device handle sets. Very handy tool as channel locks don't fit easily around the thin threaded ring. We will accept returns if you are not happy with this purchase.

For sale ONE 6-pin medeco biaxial large format interchangeable core lock plus the mortise cylinder housing it is in. Every lock is fully pinned but NO keys. Use for parts or for picking practice.